With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel.Aluminium RadiatorCompared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU.Core fanThe fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system.Cooler & PumpAs with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored.Hoses & ConnectionsThe FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case.Illumination12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector.Thermal compoundThe thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility:AMD: AM4 / AM5Intel: LGA 1150 / LGA 1200 / LGA 1700 / LGA 2066 Technical data radiatorL x W x H153 x 120 x 38mmMaterial cooling fins, channels & prechamber3003 AluminiumMaterial outer housing & threads3003 AluminiumFins per Inch19Fan size120mmFan slots1 one-sided / 2 double-sidedColorblackTechnical data fansL x W x H120 x 120 x 25mmBearing Typehydraulic BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.23 (Max. 0.4) ARated Power2.76 (Max. 4.8) WRated Speed0 - 2500rpm/min (±10%)Max. Air Flow62.8CFMMax.Static Pressure2.13mm-H2ONoise level (rated voltage, mute room, distance 1m)33.0 (Max. 34.3) dBAMTBF50000hrs at 25°CSpeed Control ModePWMConnection & control4-pin PWM (cable 40cm)Auto-RestartyesTachometer OutputyesColorblackTechnical data cooler & pumpL x W x H70,2 x 70,2 x 46mmMaterial cooler bottomcopperMaterial pump housingSynthetic material (ABS+PC)Fin structure cooler bottom0,1 x 0,1mmMaterial pump bearing & shaftceramicsStarting voltage> DC 6VRated power7.1WNoise level35DbRated Current0.59A (±10% MAX)Speed2500~3500 (±10% RPM)Power supply Digital aRGB3-pin 5V (male & female, cable length 30cm)Number of aRGB LEDs12Power supply pump4-Pin JST (Kabellänge 30cm)Technical data tubesMaterialFEP, black with weave coverLength350mmWarranty: 3 years???? Warranty Terms
Effizienter 140-mm-PWM-Lüfter von SilverStone, Shark Force-Lüfterflügeldesign für geringere Geräuschemission und höhere Leistung, breiter Drehzahlbereich von 0 bis 2.200 U/min, modulares Kabelmanagement
The holders for 120mm radiators from Bitspower extend the possibilities to accommodate radiators inside or outside the case. The black brackets are universally suitable for all 120mm fan radiators. Included in delivery are also the necessary screws for mounting. Technical Data: Color: Black Scope of delivery: Bitspower holder for 120mm radiators (2 angles), Screws
Toote kirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a matte black G1 / 4 inch screw for 16 / 10mm hoses, but can also be used for 16 / 11mm. The connection has an angle of 45 degrees and is double turnable. This greatly facilitates installation and allows for precise alignment. Note: The turning function of the connections should always be used in the disassembled state, as this is relatively stiff due to the design. When installed, do not apply force to connections to avoid damaging the connectors themselves and the radiators on them. Technical details:Material: brassColor: matt blackConnections: Thread: G1 / 4 inch Hose: 16/10 mm
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a matte black, straight adapter with two G1 / 4-inch external threads. The special feature: The length of the adapter can be flexibly adjusted between 22 and 31 mm (measured without thread). For this purpose, only one nut is loosened, one side pulled out as desired and then fixed again with the union nut. Technical details:Material: brass, matt blackConnections: male thread: 2x G1 / 4 inchLength: 22 - 31 mm (variable)
The two clamp set is suitable for the equalizing tanks of the Z-series from Bitspower. They make it possible to mount the expansion tank individually inside or outside the case, also with the corresponding pump. The set contains two clamps each with four screws and nuts. The holders have an 80mm, 5mm high and 15mm deep base. The clamps themselves are 10mm wide, have an inside diameter of 60mm and an outside diameter of 66mm. Technical Data: Dimensions: 80 x 70 x 15 mm (W x H x D) Inner Diameter Clamps: 60 mm Outer Diameter Clamps: 66mm Material: Plastic Color: Black Compatibility: Bitspower water tanks of the Z-series
VRM-Kühler von EK Water Blocks, für das High-End-Board ASUS ROG Dominus Extreme, sorgt für stabileres Overclocking und längere Lebensdauer elektronischer Komponenten, vernickelter Kupferkühler mit vernickeltem Messingdeckel, integrierte RGB-LED-Beleuchtung, ASUS Aura Sync kompatibel
With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. Technical specifications: Base plate material: electrolyte copper Material cover: acrylic glass Cover material: black anodized aluminum Connection terminal material: Acetal Dimensions: (LxWxH): 230 x 119 x 21 mm Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: Nvidia Geforce RTX 3080/3090 Scope of delivery: 1x HEATKILLER® V 1x mounting material Thermal Grizzly Kryonaut thermal paste
EK-Quantum Vector FE RTX 3080 Backplate - Black is a CNC machined retention backplate made from black anodized aluminum for the EK-Quantum Vector FE RTX 3080 - Special Edition water block. The backplate covers the backside of the graphics card's PCB and serves as an aesthetic add-on. It provides additional passive cooling for the GPU core and rear of the printed circuit board VRM section. Due to the small size of both the card and the water block, the backplate boasts a ribbed design for additional passive cooling power. Enclosed EK-Quantum Vector FE RTX 3080 Backplate - Black Mounting screws Thermal pads
Verchromtes Wakü-Fitting von Phanteks mit zwei G1/4-Zoll-Gewinden (Male) zum Verbinden zweier GPU-Wasserkühler mit einem Abstand von 16 bis 22 Millimetern
EK-Quantum Vector Strix RX 6800/6900 is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for ROG Strix RX 6800, 6800XT, 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector Strix RX 6800/6900 water block for ROG Strix GAMING RX 6800 and 6900 GPUs EK-Quantum Vector RX 6800/6900 water block is compatible with ASUS® ROG Strix GAMING Radeon RX 6800, RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of durable black POM acetal. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector Strix RX 6800/6900 D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the Strix 6800/6900 water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 300.5x157x19.5mm Enclosed EK-Quantum Vector Strix RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
Ausgleichsbehälter von Singularity Computers, mit 250mm Tube-Höhe, transparente Röhre aus Acrylglas, mit Deckel und Boden aus Acetal, flexible Montagemöglichkeiten, Schwarz
Hightech compact fans with bionic loop rotor (BionicLoopFan®). The special wing shape triggers turbulence in the air. This physical effect reduces the volume which is based on turbulances in the air flow and reduces energy consumption. With a straightened air flow and a higher Airflow these fans usually offers a higher overall cooling capacity over classical fans . Welcome to the future! - 100% developed in Germany - TÜV-certified sound level specifications = real data - extremely low-noise bionic loop rotor - bionic deep sound fan frame - position-invariant magnetic bearing NB-NanoSLI® 2 NEW! - silent NB-EKA P2 Drive NEW! - Bayer® Makrolon® rotor with anti-dust technology - weighted reinforced fibreglass PBT frame - NB cable management with two pluggable connection cables - Perfect results for PC casing, CPU cooling systems and radiator( higher cooling power at same revolution ratel) Technical Details: Dimensions: 140 x 140 x 25mm Number of Revolutions: 600 rpm Connection: 3 Pin Start / nominal voltage: 5V / 12V Volume: 5.7 dB(A) Performance: 73.6 m³ Scope of Delivery: 4 fine thread screws and knurled nuts for tool free assembly 4 NB silicone slics for vibration-free assembly each 2x 20 and 50 cm connection cable with textile sheath
This temperature sensor is equipped with G1/4" inner threads on both sides to allow maximum flexibility. The temperature sensor can therefore be equipped with most fittings on the market, allowing the use with almost any hose size. The sensor connection cable has a length of 60cm and a 2-Pin connector. Technical specifications: Connection threads: 2x G1/4"Main body: Nickel coated brassCover ring: Delrin Compatible with: aquaduct-versions with external sensor input (360 XT, 720 XT)Sensor Inputs of many Mainboardsaquaero 3.07, aquaero 4.00aquastream XT UltraAlphacool HeatmasterInnovatek Fan-O-MaticLian Li MultipanelScythe KazeT-Balancer
The nickel-plated adapter in matt black couples two tubes which do not run on a common straight line and ensures a 90 degree bend on the adapter. Two rubber rings seal both sides. The adapter is especially well compatible with the Crystal Link Tubes from Bitspower. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Angle: 90 ° Connections: 2x Ø 12 mm
Wasserkühler für Sockel 3647 Narrow P für High-End-CPUs von Intel, inklusive Waterblock für VRMs auf dem Mainboard ASUS ROG Dominus Extreme, für Custom-Wasserkühlungen, vernickelter Vollkupfer-Heatsink + transparenter Acryldeckel, integrierte digital adressierbare RGB-LED-Beleuchtung
The final touch for a perfect PC You spend a lot of time to make your PC perfect. You’ve upgraded it for top performance, ultimate quietness, and unbeatable reliability. So what’s next? Our premium upgrade Power Cables, that’s what’s next. High quality, premium function, and flat out good looks come together in our line of premium Power Cables, intended for use with your high capacity be quiet! cable management power supply. These sleeved beauties in black are available in 8 S-ATA models for maximum convenience and compatibility with all type of cases, and come with a 3 year warranty. Mix and match lengths and connector arrays to achieve the perfect combination of stylish good looks, improved cooling airflow, and peripheral device support.
HEATKILLER® IVMade from enthusiasts for enthusiasts Now even more powerful: up to 3°C temperature decrease compared to its predecessor – thanks to a completely revised cooling structure Real high flow design: higher flow performance – thanks to bigger jet structure and receptacles Improved reliability: cooling structure without jet plate, jet directly integrated into the cooler now Mounting is a child's play: tool-free Easy-Mount-System Improved fittings compatibility: 16/10 and 19/13 fittings possible – thanks to a thread distance of 25mm Water coolers from the HEATKILLER® CPU series are among the most popular and top-selling CPU water coolers. Ever since the launch of the first HEATKILLER® CPU water cooler in 2001, the series has been constantly improved and optimised. The HEATKILLER® IV presents the most extensive alterations, so far. The focus of innovation was the new cooling structure. Finer micro fins greatly enlarge the contact surface of cooling liquid and cooler. Flow characteristics became optimised as well. These changes increased the cooling performance by up to 3°C compared to the predecessor. The flow efficiency benefits too supported by large-volume receptacles. The HEATKILLER® IV features a real high flow design, making it perfectly suitable also for lower performing pumps. By the way, the new cooling structure completely does without a jet plate. This improves the cooler's reliability because less dust particles can accumulate within the cooling structure. The HEATKILLER® IV also comes up with an improved feature set. This includes the comfortable Easy-Mount-System. After initial installation, the cooler can be mounted or de-mounted tool-free at any time without the need to dismount the mainboard as well. And the mounting brackets do now precisely define the contact pressure, thus mounting errors virtually do not appear. If you prefer big fittings, you will be glad to hear of the enlarged distance between the G 1/4” threads – which is now 25mm. This makes the HEATKILLER® IV compatible with all common thread types, up to the size of 19/13. The HEATKILLER® IV is a product “made in Germany”, manufactured on state-of-the-art CNC machines at the Watercool headquarters. Specifications:Material: Acetal (top), copper (bottom plate), polished stainless steel (brackets), nickel-plated brass ( Easy-Mount-System)Dimensions (L x W x H): 66 x 59 x 17 mmWeight: ca. 450 gSealing: NBR 70Threads: 2x G ¼ inch (DIN ISO 228-1)Thread distance: 25 mmSocket compatibility AMD: 939, 940, AM2, AM2+, AM3, AM3+, FM2, FM2+ Included:HEATKILLER® IV BASIC (AMD processor) ACETAL CLEANMounting material / Manual
Now finally also with us the Black ICE Nemesis radiators. The Black Ice® Nemesis® GTS radiators are the next generation of computer radiators from Hardware Labs. These radiators offer an improved cooling performance when using
With Alphacool’s new compression fittings for plexi, brass or carbon tubes, Alphacool is taking another step in the direction of perfection and quality. The first two colours, chrome and deep black, offer a great variety to suit many tastes. The fully coordinated product series gives every system a chance to shine, and the customization options are endless when paired with Alphacool plexi-brass tubes! A new chromatization technique binds the colouring tightly to the brass surface. This improves the longevity of the intense colour and prevents any chipping of the chrome layer. Blue Alphacool lettering on some of the connectors also highlights the uniqueness of these parts. The function of these connectors is: This connector can be used to connect a 16mm plexi, brass or carbon tube to a G1/4" thread. Sixpack: Since six connectors of one kind are often necessary, Alphacool is now offering Sixpacks. This has a lot of advantages for you! Technical Details: Material: chromatized brass Colour: chrome Scope of Delivery: 1x Alphacool HT 16mm HardTube compression fitting G1/4 for plexi-brass tubes (rigid or hard tubes) - knurled - chrome sixpack
Full-Block-Wasserkühler von EK Water Blocks, für RTX 3080 und 3090-Grafikkarten im Referenz-Design, schwarzer Acetal-Deckel, Kühlkörper aus hochreinem Kupfer
EK Water Blocks EK-Torque STC-16/12 color ring pack of 10, black. These exchangeable rings for the 16 / 12mm Soft-Tube compression fittings from EKWB are made of aluminum, are available in different colors and give your system a unique look. Compatibility: EK-Quantum Torque STC-16/12 connections Technical specifications: Color: Black Material: aluminum Quantity: 10 pieces
