Jahutid ja lisad

Drehbarer 90-Grad-Winkel-Adapter, Teil der EKWB-Quantum-Linie, zur Verbindung von G1/4-Zoll-Außen- mit G1/4-Zoll-Innengewinden

Zalman CNPS9X PERFORMA BLACK. Tüüp: Õhujahuti, Ventilaatori läbimõõt: 12 cm, Õhuvool: 104,25 m³/h, Maksimaalne õhusurve: 1,43 mmH2O. Laius: 122 mm, Sügavus: 76 mm, Kõrgus: 157 mm. Toote värv: Must

Noctua NA-SAC1 3:4-Pin Adapter CablesTootekirjeldus inglise keeles:

Dimensions 120x120x25mm, Turns 1200rpm, Air flow rate 86.02m³ / h, Air pressure 1.27mmH₂O, Volume 19.5dB (A), Fan bearing LLS, Connection 3-pin, Voltage range 6-12V, Power consumption 3W, Special features illuminated in green, FD-FAN-PRI-SL12-GN

The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The pricing of the new series is also pleasantly affordable. New revision: New cool design More robust materials for even longer lifespan Lowered noise emissions Suitable for continuous operation Noise emissions: The small chillers (like HC150) have a noise emission of 20dB(A) only and can be used near the computer / aquarium without disturbing. Bigger models (like HC500) should be additionally decoupled to reduce the noise level if necessary The models HC1000 und HC 2000 should be extra decoupled or maintained in a seperate room. This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room. We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation. To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware. CPU: 80W (standard) to 150W (overclocked) GPU: 50W (small cards) to 250W (GTX 980) MB: 20 to 40W per component The added values of your system must not exceed the given cooling capability of the chiller. What aquarium size can be cooled with my water chiller? The manufacturer provides the following data: Model / aquarium size in liters: HC-130 / 50-100L HC-150 / 50-200L HC-250 / 100-300L HC-300 / 100-400L HC-500 / 200-800L HC-1000 / 300-1000L HC-2000 / 400-1500L We at Aquatuning wish to advise you that the manufacturer’s data was obtained under optimal circumstances. The temperature response of the aquarium may greatly vary because of insulation, heat from lights respectively sunlight. Hence we recommend using the larger model when reaching the upper limit of the aquarium size values. Notes regarding shipment: For shipping via parcel delivery (GLS) we have manufactured a specially padded carton. For handling and packaging we must charge 15€ incl. VAT. This charge is not charged when the Chiller is picked up or with pallet shipment if the chiller is shipped without the special packaging. Note regarding shipping: This unit can only be shipped via a forwarding company. As the chipping charges differ by distance an online calculation is not possible. Please provide your full telephone number and E-Mail address when ordering, we will contact you after the order is complete. The shipping charge is approximately 50€ within Germany. Technical specifications: Power: 1/6 HP Power consumption: 150W Cooling capacity: 265W (suitable for extreme OC and cooling) Recommended coolant flow: 600-2200 l/h Weight: 18kg Cooling agent: R134A Dimensions: 448x330x440mm (LxWxH) Connector outside diameter: 18-20mm Heat exchanger material: Titanium max. compressive load: 0,8bar Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps current demand: 1.3 A (50 Hz) current drain: 299 W Scope of Delivery: 1x Waterchiller Hailea Ultra Titan 300 2x 45° angle with rubber seal 2x rubber seal with G1/4" internal thread 2x suitable hose clamps Note for first-time users: If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product! Note for aquarium-use: The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least on power-lever higher that theoretically calculated This product has been reviewed for you (by): Overclockingstation Zockon bit-tech (engl.)

The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The pricing of the new series is also pleasantly affordable. New revision: New cool design More robust materials for even longer lifespan Lowered noise emissions Suitable for continuous operation Noise emissions: The small chillers (like HC150) have a noise emission of 20dB(A) only and can be used near the computer / aquarium without disturbing. Bigger models (like HC500) should be additionally decoupled to reduce the noise level if necessary The models HC1000 und HC 2000 should be extra decoupled or maintained in a seperate room. This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room. We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation. To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware. CPU: 80W (standard) to 150W (overclocked) GPU: 50W (small cards) to 250W (GTX 980) MB: 20 to 40W per component The added values of your system must not exceed the given cooling capability of the chiller. What aquarium size can be cooled with my water chiller? The manufacturer provides the following data: Model / aquarium size in liters: HC-130 / 50-100L HC-150 / 50-200L HC-250 / 100-300L HC-300 / 100-400L HC-500 / 200-800L HC-1000 / 300-1000L HC-2000 / 400-1500L We at Aquatuning wish to advise you that the manufacturer’s data was obtained under optimal circumstances. The temperature response of the aquarium may greatly vary because of insulation, heat from lights respectively sunlight. Hence we recommend using the larger model when reaching the upper limit of the aquarium size values. Notes regarding shipment: For shipping via parcel delivery (GLS) we have manufactured a specially padded carton. For handling and packaging we must charge 15€ incl. VAT. This charge is not charged when the Chiller is picked up or with pallet shipment if the chiller is shipped without the special packaging. Note regarding shipping: This unit can only be shipped via a forwarding company. As the chipping charges differ by distance an online calculation is not possible. Please provide your full telephone number and E-Mail address when ordering, we will contact you after the order is complete. The shipping charge is approximately 50€ within Germany. Technical specifications: Power: 1/4 HP Power consumption: 190W Cooling capacity: 390W (suitable for extreme OC and cooling) Recommended coolant flow: 500-2500 l/h Weight: 18,6kg Cooling agent: R134A Dimensions: 448x330x440mm (LxWxH) Connector outside diameter: 18-20mm Heat exchanger material: Titanium max. compressive load: 0,8bar Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps current demand: 1.8 A (50 Hz) current drain: 414 W Scope of Delivery: 1x Waterchiller Hailea Ultra Titan 500 2x 45° angle with rubber seal 2x rubber seal with G1/4" internal thread 2x suitable hose clamps Note for first-time users: If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product! Note for aquarium-use: The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least on power-lever higher that theoretically calculated This product has been reviewed for you (by): Overclockingstation Zockon bit-tech (engl.) How2 (Userreview): Hardwareluxx

Arctic 140mm Grill

Kompakter CPU-Kühler im Tower-Design, mit 92-mm-Lüfter, integrierte RGB-Beleuchtung, max. TDP von 95 Watt, hohe Kompatibilität zu Intel- und AMD-Sockeln

Sencor ventilaator Pedestal Fan SFN 4047WH

Ühilduvus emaplaatidega: Intel LGA1700 Ühilduvad jahutid: Noctua NH-U14S, NH-U12A NH-U12S chromax.black, NH-U12S SE-AM4, NH-U12S redux NH-U9S, NH-U9S chromax.black NH-L12S, NH-L12 Ghost S1 edition

Corsair iCUE ML140 RGB ELITE Premium, Dual Pack CO-9050119-WW White

Let the temperature cool downWe know how important for you is continuity of work in your cryptocurrency or PC. You've probably encountered a situation where your equipment overheated, resulting in the loss of important data on more than one occasion.We have a solution for this in the form of the presented Qoltec brand fan model.Due to the high rotation speed, high airflow is generated, which removes the concentrated heat from the filled electronic cases, thus your equipment: Will not overheat, Will improve its operation, Automatically extends the life of. Double protection at high speedThe Qoltec ForceFan fan is equipped with a solid double ball bearing, which guarantees reliable and durable operation of your equipment. In addition, it is characterized by high rotation speed - up to 6000 revolutions per minute! The cooling of the devices takes place at a rapid pace, and the classic, black housing will perfectly fit into any type of crypto excavator or PC.

Vertikale GPU Halterung, für 3-Slot-Grafikkarten, mit integriertem Riser Kabel

Clatronic keraamiline soojapuhur Clatronic HL3763, must

120 mm großer PWM Lüfter, 24 V Betriebsspannung, Wasser-/Staubschutz (IP67), max. 121,8 m³/h (2.000 U/min), Einphasen-Antriebsmotor

50 cm lange PETG-Röhre im 2er Pack von XSPC, 14/10 mm Durchmesser (Außen/Innen), transparent

Qoltec termopasta Thermal Grease 11W/m-K 2g hall

Tootekirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a matte black straight adapter of 3/8 inch OD to G1 / 4 inch female, designed specifically for the inputs of the Eheim 1046 and 1048 pumps and the 1250 output. Before screwing in the adapter, the sealing ring should be coated with a lubricant, as otherwise it could be pulled out of its groove and exerts too much pressure on the plastic ring of the pump in the upper area. Alternatively, it is sufficient not to fully screw the adapter, but only up to the rubber itself. Technical Details:Material: brassColor: matt blackThread: G1 / 4 inch (internal thread)Compatibility: EHEIM 1046 (inlet) EHEIM 1048 (inlet) EHEIM 1250 (outlet)

Gerade Gehäusedurchführung mit 1/4 Zoll Innengewinde auf beiden Seiten in Mattschwarz

The adapter in matt black from Bitspower has a G1/4" external thread and a G1/4" internal thread. It has an angle of 90 degrees. Technical Data: Material: Brass Colour: Matt Black Angle: 90 ° Thread: G1/4" and inner G1/4" Thread Length : 5 mm

The CORSAIR Hydro X Series XR5 140 mm Water Cooling Radiator delivers extreme custom cooling performance, with an 30 mm radiator thickness and premium copper core.

Hochleistungs-Kühler mit transparentem Nylon- und Acryldeckel für Intel & AMD, große Kontaktfläche ideal für Mehrkern-CPUs, integrierte digital adressierbare RGB-LED-Beleuchtung

Extrem einfach nachrüstbarer DEMCiflex-Staubfilter für den hinteren Lüfter des be quiet! Dark Base Pro 900 - komplett Schwarz

DEMCiflex Dust Filter 140mm White DF0689Toote kirjeldus inglise keeles:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution, which in this case is suitable for 140 mm fans. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Note:The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate. Technical details:Size (frame): 153 x 153 mmSize (filter): 129 x 129 mmCompatibility: 140 mm fan slotMaterial (filter): polyester meshColor: white (frame), white (filter)Mounting: magnetic bracket + mounting frameAdvantages: Fast installation No compatibility restriction Easy and quick cleaning Effective filter effect with high air permeability Durable fabric

DEMCiflex Dust Filter 140mm Round Black/White DF0495Toote kirjeldus inglise keeles:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution, which in this case is suitable for 140 mm fans. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Finally, a few notes on the installation: First, the question arises, which fans have to be covered at all. As already mentioned, this applies exclusively to the sucking fans. But which are they? The safest way to recognize this is on the fan itself, with two arrows on the outside or inside of the fan frame. If one of the two arrows points towards the interior or if the rotor suspension is aligned with the interior, this is an aspirating fan. These are usually located on the front, side and bottom, whereas the rear and cover fans usually carry the air out of the housing and therefore need not be filtered. In order to maximize the filter effect, an overpressure in the housing can be generated. This means that more volume of air is forced into the housing than is being sucked out of the housing by other fans at the same time. This prevents air (and with it the dust) from entering the interior through other openings that may not have been filtered. If all fans are the same size, you should blow more fans into the housing than pull out. In this case, the power supply is to be counted as an additional, extracting fan, as long as it does not receive its supply (fan side) directly from the outside (occurs at floor mounting). If different fans with different sizes and speeds are used, the respective air volumes (m³ / h) in the data sheets give a good reference value, whereby in turn the total volume of the suction fans must be higher than that of the blowing out fans. Note: The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate. Technical details:Size (frame): Ø approx. 152 mmSize (filter): Ø approx. 127 mmCompatibility: 140 mm fan slotMaterial (filter): polyester meshColor: black (frame), white (filter)Mounting: magnetic bracket + mounting frameAdvantages: Fast installation No compatibility restriction Easy and quick cleaning Effective filter effect with high air permeability Durable fabric

Fractal Design jahutus Celsius+ S36 Prisma Water Cooling Unit

The perfect solution for perfect curves in the Alphacool HardTubes is now available. Simply slide the silicon insert into the plexiglass tube and heat up the desired section. Thanks to the extreme heat resistance of silicon, the tube can be bent without the curved section buckling. After it cools, the silicon insert can simply be pulled out. Available for tubes with 10mm, 12mm, and now 13mm inner diameters, and each size comes in 30cm length for curves in shorter tubes or 100cm length for curves in longer tubes. Technical Details Length: 30cm Thickness: 13mm Colour: blue Scope of Delivery 1x Alphacool silicon bending insert 30cm for ID 1/2” / 13mm HardTubes - blue NoticeDue to the manufacturing process, the diameter can vary by 0.5 - 1mm.

Spectrum RGB LED Lighting Top Cover and FAN Patented 120mm dual blade (White) fan optimizes air flow to improve cooling performance. The DTH base delivers heat from the CPU to the heat sinks directly to improve cooling performance. Supported up to 180W of TDP with four heatpipes. Supported various Intel and AMD sockets. Spectrum RGB LED Top cover and Fan ALL NEW BLACK, WHITE DESIGNNew ZALMAN-inspired design with spectrum RGB LED top cover and fan brings a perfect upgrade for your PC.Easy Cable Connection CNPS 10X Optima II RGB Spectrum Effect automatically operates Top Cover and Fan. Y Cable is provided as seen below and you may connect it to motherboard to utilize LED features. Four Highly Performance Conductive Copper HeatpipesFour delicately designed copper heatpipes are directly compressed to the CPU which equally absorbs and rapidly dissipates heat.DTH(Direct Touch Heatpipes) BaseDTH(Direct Touch Heatpipes) technology is used to increase heat dissipation from the CPU and maximize cooling performance.Quiet Yet Effective CoolerOptimal design of the aluminum heat sinks and four heatpipes dissipate heat from CPU effectively (Supports up to 180W TDP).Hydraulic BearingHydraulic bearing, like ball bearing, does not come into contact with metal and lubricant layer replaces bearing. It causes very low noise, low heat, and is shock-resistant that is very durable and long-lasing. Quiet 120mm PWM Spectrum RGB LED FANOptimal design brings highly-efficient performance and 27 dB(A) low noise environment.Patented "Dual Blade Fan" by ZALMANDual airflow from impeller structure brings strong cooling performance while efficient air flow reduces noise.Dual Blade FanWhen the small inner wind tunnel and large outer wind are combined simultaneously, it creates greater air flow to improve cooling performance.Pre-Installed Anti-Vibration Rubber PadsTotal of 8 anti-vibration rubber-pads installed in front and back to minimize noise and vibration.Superior Performance of Aluminum Heat Sinks and Heatpipes Delicate designed four copper heatpipes and aluminum heat sinks are combined for best cooling performance. Heat sinks are evenly spaced to dissipate heat evenly and fast for best cooling performance.

Verlängerung von EKWB, mit 14 mm Länge, mit zwei G1/4-Zoll-Gewinden (1x AG, 1x IG), um 7 mm versetzt, aus silbern satiniertem Messing

30 mm lange Verlängerung (Extender) mit je einem G1/4-Zoll-Innen- und Außengewinde - mattschwarz

Hard Tube Fitting von EK Water Blocks, für Röhren mit 14 mm AD, Kompatibel zu Röhren aus Acryl / PETG / Kupfer / Messing / Edelstahl, mit optionalen Ringen farblich individualisierbar

Vernickeltes Compression Fitting mit G1/4-Zoll-Gewinde für Schläuche mit 16/10 mm OD/ID

The Eisblock XPX Aurora Edge is a powerful CPU cooler that shows its strength especially on multi-core processors with 4, 6, 8, 12 and more CPU cores. The total area of the cooling channels on the CPU cooler base is 34 x 32 mm. This means that the Eisblock XPX Aurora Edge cooler also copes with large CPU DIEs. Performance in overflow! The Eisblock XPX Aurora Edge has a special injection technology that was developed and patented by Alphacool itself. The so-called "ramp system" is located in front of the nozzle plate and ensures an even flow of water within the cooler. The water is pressed through the nozzle plate in a controlled manner and distributed evenly over the cooler base. The radiator bottom itself has 81 cooling fins with a fin structure of only 0.2 mm per fin. In this way, the largest possible surface area has been created in the available space in order to dissipate the CPU's waste heat to the water as quickly as possible. Lighting Behind the Alpahcool logo, 2 digitally addressable 5V RGB LEDs are installed, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the digital RGB lighting, the enclosed adapter must be connected to the 3-pin female connector and connected to a digital RGB controller or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Discreet appearance The matt finish gives the cooler, which is made entirely of brass (except for the cooler bottom), a noble look. This makes it interesting for users who prefer a discreet appearance and want to do without a complex aRGB illumination. Thermal grease The thermal paste included in the delivery is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive thermal grease is particularly suitable for high contact pressures, but can still be processed perfectly due to its viscosity of 850000 TF. Compatibility: Compatibility Intel: LGA 115x / 1200 / 1700 / 2066 AMD Compatibility: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data L x W x H 70 x 70 x 32,5mm Material cooler nickel plated copper Material bottom part brass Material top brass Number of aRGB LEDs 2 Threads 2 x G1/4“ Power supply Digital aRGB 3-Pin 5V Pressure tested 0,8 bar Max working temperature 60°C Net weight 694g Color chrome

Kühlblock und Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung

Set für einen kompletten CPU-Wakü-Kreislauf, 2x 360-mm-Radiatoren, EK-Pro Kühler, Starke D5-Pumpe, 6x 120-mm-Lüfter, diverses Zubehör

The Bitspower fittings are the ideal complement for water cooling systems. The G1/4" screw connection with union nut in matt black is suitable for 16/10mm Soft Tubes (as well as for 16/11mm). Technical Data: Material: Brass Color: Matt Black Thread: G1/4 Zoll Thread Length: 5 mm Tubing Size: 16/10 mm (ID 3/8", OD 1/2")

The nickel-plated adapter from Bitspower in the color shiny silver, has a G1/4 inch internal thread and a G1/4 inch external thread. Technical Data: Material: Nickel-Plated Brass Main Color: Shiny Silver Thread: 1x G1/4", 1x Inner G1/4" Thread Length: 5 mm

1 Liter UV aktives und fluoreszierendes Kühlmittel, in Rot mit geringer elektrischer Leitfähigkeit, zur Nutzung in Wasserkühlungen

Product kirjeldus: RaidSonic ICY BOX IB-M2HS-701 - solid state drive heatsink Product Type: Solid state drive heatsink Package Content: Thermal pads mõõtmed (WxDxH): 7 cm x 2.1 cm x 0.5 cm kaal: 8 g värv: must

The Bitspower fittings are the ideal complement for water cooling systems. The G1/4" screw connection with union nut in shiny black is suitable for 16/10mm Soft Tubes (as well as for 16/11mm). Technical Data: Material: Nickel-Plated Brass Color: Shiny Black Thread: G1/4 Zoll Thread Length: 5 mm Tubing Size: 16/10 mm (ID 3/8", OD 1/2")