The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. In structure, the Alphacool NexXxoS X-Flow Radiators differentiate materially from the standard radiators. The X.Flow Radiators are designet for high flow rates. The bevelled copper chambers on both sides have an identical structure. This Water is jetting at the same time through all avialable channels to the other chamber to whitch it then leaves the radiator.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities.Here, too, Alphacool provides the popular sizes of the 120mm series. Different thicknesses, 30mm, 45mm and 60 mm underscore the broad spectrum that cover these radiators. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical dataDimensions (L x W x H)413 x 124 x 45mmQuantity of cooling channels24Cooling channelsCopperColorblackFan threadM3Connection6x G1/4"SlatsCopperThickness39 - 49mmNumber of fans3Fan size120mmHousingSteelPressure tested0,8 barManufacturerAlphacoolFins per inch16
The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical dataDimensions (L x W x H)466 x 144 x 45mmQuantity of cooling channels28Cooling channelsCopperColorblackFan threadM3Number of fans3Connection6x G1/4"SlatsCopperThickness39 - 49mmHousingSteelManufacturerAlphacoolFins per inch12Pressure tested2 barFan size140mm
The Protium Reservoir Triple Port Cap, can extend or replace existing Protium products. The cap is compatible with all Protium compensation reservoirs from Singularity. It is made of clear acrylic and has three G1/4" threads. Technical Data Material: Acryl Colour: Transparent Connections: 3x G1/4" Compatibility Protium D5/Reservoir Combo Protium Reservoirs
The connection for 16mm (AD) Hard Tubes from EK Water Blocks, is a compression fitting made of nickel-plated brass. It is kept in black and comes from the Torque series, which convinces with a simple and timeless design. Originally intended for the EKWB Quantum series, this fitting is also compatible with other EK products. In this fitting, the union nut serves as a compression ring, which presses the sealing ring onto the hard tube. It thus offers a higher level of safety and sealing than, for example, the fittings of the EK-HD series. As a small feature, the union nut has a recess under which coloured rings are placed, which provide a bit of individuality and are available separately. Technical Data: Material: Nickel-Plated Brass Colour: Black Supported Tube: 16 mm OD Thread: G1/4", male Thread Length: 4,5 mm Outer Diameter (Fitting): 24 mm Installed Height: 15 mm Compatible Solid Tubing: Acrylic, PETG, Copper, Brass, Stainless Steel
The Alphacool Eiszapfen 16mm off set fitting rotatable G1/4 OT to G1/4 IT is an offset piece with one female thread and one male thread that can be easily integrated into any water circuit. Integration made easy The offset piece is very compact and can be integrated into any water circuit thanks to its G1/4" female and male threads. It is simply screwed to the corresponding G1/4" connections at any position in the water circuit. Design The threads are 5mm deep and high respectively, allowing for the very compact design. Thus, the L-connector can be installed very space-saving in the system. Compatibility: G1/4" OT/IT connectors Technical data L x W x H 30mm x 25,5mm x 18mm Material brass Color chrome Threads G1/4" IT, G1/4" OT Thread depth 5mm Thread height 5mm
Efficient Thermal ConductivityThe Thermal Pad based on silicone and a special filler outperforms generic and performance pads by far.Filling the GapsDue to its low hardness and great compressibility, the thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems.Easy to ApplyInstalling the ARCTIC Thermal Pad is child's play; perfect for beginners..Safe HandlingThe Pad does not contain any metallic particles, is electrically isolating and not capacitive. The handling is safe as contact with any electrical traces would not result in damage of any sort.Toote värvSinineMaterjalSilikoonPakendi laius195 mmPakendi kõrgus210 mmPakendi kaal45 gLaius145 mmSügavus0,5 mmKõrgus145 mmKaal41 g
The nickel-plated adapter from Bitspower in shiny silver has two G1/4 inch external threads. The adapter is rotatable, so that the screwing on is not unnecessarily complicated. Technical Data: Material: Nickel-Plated Brass Main Color: Shiny Silver Thread: G1/4" on both side Thread Length: 5mm
The adapter in carbon black from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Carbon Black Connection: 12 mm (OD) Thread: G1/4" Thread Length: 5 mm
The None Chamfer Brass Hard Tube in the color shiny black from Bitspower, is made of brass. With this durable tube, as well as the stylish color, high quality and unique water cooling can be created. As with other Hard Tubes, the tube can be cut or bent for the WaKü. The latter however with tube bending tool and for experienced hobbyists. As a rule, the None Chamfer does not need to be reworked when it is cut. The tube measures 300mm in length, 12mm in outer diameter and 10.6mm in inner diameter. It has a wall thickness of 0.7mm and is therefore very stable. C47, C48 and the ML series from Bitspower are compatible as connectors. Technical Data: Material: Brass Color: Shiny Black Material Thickness: 0.7 mm Outer Diameter: 12 mm Inner Diameter: 10,60 mm Length: 300 mm Compatibility: C47, C48 & ML series Bitspower connectors only
The connection for 16mm (AD) Hard Tubes from EK Water Blocks, is a compression fitting made of nickel-plated brass. It is silver in colour and comes from the Torque series, which convinces with a simple and timeless design. Originally intended for the EKWB Quantum series, this fitting is also compatible with other EK products. In this fitting, the union nut serves as a compression ring, which presses the sealing ring onto the hard tube. It thus offers a higher level of safety and sealing than, for example, the fittings of the EK-HD series. As a small feature, the union nut has a recess under which coloured rings are placed, which provide a bit of individuality and are available separately. Technical Data: Material: Nickel-Plated Brass Colour: Silver Supported Tube: 16 mm OD Thread: G1/4", male Thread Length: 4,5 mm Outer Diameter (Fitting): 24 mm Installed Height: 15 mm Compatible Solid Tubing: Acrylic, PETG, Copper, Brass, Stainless Steel
The adapter from Bitspower in the colour matt black has an angle of 90 degrees, a G1/4 inch internal thread and a G1/4 inch external thread. Both sides can be rotated 360 degrees and the fluorescent rubber seal on the external thread is particularly chic. Technical Data: Material: Brass Main Color: Matt Black Angle: 90° Thread: 1x G1/4", 1x Inner G1/4" Thread Length: 6 mm
This matt black T-splitter from Bitspower is made of brass and has three G1/4" internal threads. For example, a branch can be easily integrated into the main line of the water cooling system. Technical Data: Material: Brass Colour: Matt Black Connections: 3x G1/4" female thread Thread length: 5 mm
Tootekood: ROGSTRIXLCII240ARGBGTIN: 4711081145905Jahutid ja lisad
Water block dimention: 80 x 80 x 45 mm Block Material (CPU Plate): Copper Radiator Dimension: 121 x 272 x 27 mm Radiator Material: Aluminum Tube: Sleeved Rubber tube Tube Length: 380 mm Fan: ROG Designed ARGB Radiator Fan - Size: 2 x Fan Slots (120mm) - Dimension: 120 x 120 x 25 mm - Speed: 800 - 2500 RPM +/- 10% - Static Pressure: 5.0 mmH2O - Air Flow: 80.95 CFM / 137.5 m3h - Noise: 37.6 dB(A) - Control Mode: PWM/ DC AMD: AM4 Package Content: 1 x Liquid Cooler (pre-applied thermal compound) 2 x 120 mm ARGB Radiator Fan 1 x Accessory Pack of Screws and Brackets 1 x Quick Start Guide 1 x USB cable for software control 1 x 1-to-2 Fan Splitter Cable 1 x 1 to 4 ARGB spliter cable
Full-Block-GPU-Kühler für Custom-Wasserkühlungen, für ASUS TUF GeForce RTX 3070-Grafikkarten, Deckel aus Acryl, Boden aus vernickeltem Kupfer, integrierte digitale RGB-Beleuchtung (3-Pin, 5VDG)
The CORSAIR H100 RGB all-in-one liquid CPU cooler delivers strong, dependable cooling and stunning lighting, with two CORSAIR SP120 RGB ELITE PWM fans, a 240mm radiator, and 29 RGB LEDs.
Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung
Full-Cover-Waterblock von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung
