Fan speed (max): 1400 Fan speed (min): 500 Air flow rates: 70.32 Number of fans: 3 Number of Heatpipe tubes: 3 Noise: 30.4 Weight: 579.3 Other features: ARGB controller or 5V addressable RGB header on motherboard Hydraulic Bearing
Toote kirjeldus inglise keeles:The eponymous "Wing Boosts", small increases on the impeller intake side, reduce air turbulence. The fan therefore works quieter at higher speeds than conventional fan designs would allow. The triple set offered here consists of three fans including RF receiver, splitter cables and remote control for controlling and synchronizing the three fans included in the set.The features of the Alpenföhn Wing Boost 3 ARGB fan at a glance:- Three 140-millimeter fans with digitally addressable RGB lighting- Hydrodynamic bearing for high performance, quiet operation and long life- Optimized rotor blades deliver the perfect balance between contact pressure and airflow- Speed range from 400 to 1,050 rpm- 4-pin PWM and 3-pin RGB connector- Including RGB and PWM splitter, RF remote control and receiver as well as screws- ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion and ASRock PolychromeWing Boost 3 ARGB: Powerful 140mm fanThe Wing Boost 3 ARGB is a 140mm PWM-controlled fan that is equally well-suited for mounting on enclosures, processor coolers and radiators. The fan operates in a speed range between 400 and 1,050 revolutions per minute, achieving a delivery volume of 100.6 m³ / h and a static pressure of 2.19 mm H2O.The hydraulic bearing, which reduces friction noise to a minimum, and the rubber decouplers in the fan frame ensure whisper-quiet operation, even at low revs. Under full load, the Wing Boost 3 ARGB produces a maximum noise level of 19 decibels.Addressable RGB LED lighting in the frameThe Alpenföhn Wing Boost 3 ARGB is equipped with digitally addressable RGB LED lighting. The manufacturer has two 16.8-million-color rings integrated into the fan frame, which throws a slight light on the impeller and can be connected via a 3-pin RGB connector to the motherboard or corresponding controllers. The Wing Boost 3 RGB is compatible with ASUS Aura, Gigabyte RGB Fusion, ASRock Polychrome RGB and MSI Mystic Light.In addition to the three fans of the Alpenföhn Wing Boost 3 ARGB model, this kit also includes all the accessories needed to synchronize the PWM signal and the RGB LED lighting of the three fans. The lighting can be controlled via the enclosed remote control.Technical details:- Dimensions: 140 x 140 x 25 mm (W x H x D)- Material: plastic, rubber- Color: black fan, frame), gray (decoupler)- Volume: max. 19 dB (A)- Speed: 400 - 1,050 rpm- Delivery volume: max. 100.6 m³ / h- Static pressure: 2.19 mm H2O- Voltage: 12V- Voltage range: 7 - 13.2 V- Rated power: 1.32 W- Input current: 0.11 A.Connection:- 4-pin PWM- 3-pin RGB (5VDG)- Lighting: RGB (16.8 million colors)Delivery:- 3x Alpenföhn Wing Boost 3 RGB- 12x screws for housing- 12x screws for radiator- 1x RF remote control- 1x RF receiver- 1x RGB splitter- 1x PWM splitter
Thermaltake's Pure Duo 12 ARGB Sync is a PWM controlled fan with addressable LEDs and 16.8 million colours. Radiators in particular benefit from its very quiet operation and low heat generation thanks to its self-lubricating hydraulic bearing. The 9-blade design allows a very high airflow and efficient cooling. The anti-vibration pads also ensure low noise levels. As the sealing cap prevents the lubricant from escaping, a long service life is also guaranteed. The two rings, each with nine addressable LEDs, are independent of each other and impress with an even light coverage and high colour intensity. The extensive effects give your housing the finishing touch and give it a unique look. Using the included controller, which does not require a 5V ARGB port, seven breathtaking effects can be selected. Alternatively, the fans can be connected to a 5V ARGB port on the mainboard and synchronised via compatible software such as AsRock Polychrome, ASUS Aura Sync, GIGABYTE RGB Fusion and MSI Mystic Light Sync. Technical Data: Dimenson: 120 x 120 x 25 mm Interface: Fan 2510-4P, LED 5V RGB Header Fan Stated Voltage: 9.0 V Fan Rated Voltage: 12 V and 5 V Rated current: 0.27 A, LED 0.28 A Power Input: 12V – 4.08 W, 5V – 2.8 W Fan Speed: 500 - 1500 rpm Max. Air Pressure: 1.72 mm-H2O Max Air Flow: 56.51 CFM Noise: 28 dB-A Bearing Type: Hydraulic Bearing Life Expectation: 40,000 hrs, 25℃ Weight: 168 g
Gross depth (mm): 1200.00 mm Gross height (mm): 25.00 mm Gross weight: 0.16 kg Gross width (mm): 120.00 mm Net weight: 0.14 kg Packing quantity: 1.00 pc(s) Paper/Pasteboard: 20.00 g Tare weight (kg): 0.02 kg Volume (m3): 0.00 m³ Embeeded battery: No WEEE tax: No
Tootekood: PH-F140D30_DRGB_PWM_WT01GTIN: 886523002970Jahutid ja lisad
Leistungsstarker PWM Lüfter in Weiß, 30 mm Tiefe mit erweiterten Lüfterblättern, optimiert für Gehäuse und Radiatoren, umfangreiche D-RGB-Beleuchtung, einfaches Daisy-Chaining per Clips
The CORSAIR iCUE Link LX120 RGB case fan is a high-performance cooling solution designed for desktop computers and servers. It features a 120 mm fan diameter and a magnetic bearing for quiet and efficient operation. With an airflow range of 9.75-69.9 cfm and air pressure of 0.13-5.22 mm, it provides exceptional cooling capabilities. The fan supports Pulse-width modulation (PWM) for precise speed control and includes a Zero RPM fan mode for silent operation at low temperatures. Additionally, the LX120 RGB is equipped with addressable RGB lighting and CORSAIR AirGuide technology, enhancing both the aesthetics and airflow direction of your system. The noise level is kept between 10 - 36 dBA, ensuring a quiet environment. With the included mounting kit and Corsair iCUE support, installation and customization are straightforward, making it an ideal choice for system modding and upgrading your cooling system.
The CORSAIR iCUE Link LX120 RGB case fan is a high-performance cooling solution designed for desktop computers and servers. It features a 120 mm fan diameter and a magnetic bearing for quiet and efficient operation. With an airflow range of 9.75-69.9 cfm and air pressure of 0.13-5.22 mm, it provides exceptional cooling capabilities. The fan supports Pulse-width modulation (PWM) for precise speed control and includes a Zero RPM fan mode for silent operation at low temperatures. Additionally, the LX120 RGB is equipped with addressable RGB lighting and CORSAIR AirGuide technology, enhancing both the aesthetics and airflow direction of your system. The noise level is kept between 10 - 36 dBA, ensuring a quiet environment. With the included mounting kit and Corsair iCUE support, installation and customization are straightforward, making it an ideal choice for system modding and upgrading your cooling system.
The Riing Plus 12 RGB Radiator Fan Lumi Plus TT Premium Edition Combo Kit comes as a set, with three Riing Plus 12 RGB Radiator fans and three Pacific Lumi Plus LED strips with digital controller. The RGB fan is a 120mm high pressure fan, with a 16.8 million color LED-RIng and 12 addressable LEDs with pressure blades and hydraulic bearings. The software-controlled Pacific Lumi Plus LED Strips illuminate the PC case individually. They are made of high-quality materials and have magnets that make them easy to attach, as well as a chain-shaped plug for versatile connection options. The kit is compatible with TT RGB PLUS software, Alexa Voice Service from Amazon and Razer Synapse (Razer Chroma). Technical Data P/N CL-F076-PL12SW-A FAN DIMENSION Fan: 120 x 120 x 25 mm, LED Strip : 30cm -12LEDs INTERFACE USB 2.0 connectors (9 Pin) SYSTEM COMPATIBILITY Windows 7 / 8 / 8.1 / 10 FAN STARTED VOLTAGE 9.0 V RATED CURRENT Fan 0.15 A (one fan) , 0.48 A (one LED strip) RATED VOLTAGE 12 V & 5V POWER INPUT 12V – 9.45 W . 5V – 16.7W (Fan*3 + LED Strip*3) FAN SPEED 500 ~ 1500 R.P.M MAX. AIR PRESSURE 1.54mm-H2O MAX AIR FLOW 48.34 CFM NOISE 24.7 dB-A BEARING TYPE Hydraulic Bearing LIFE EXPECTATION 40,000 hrs, 25℃ GEWICHT 870 g
Thermaltake's Pure Duo 14 ARGB Sync is a PWM controlled fan with addressable LEDs and 16.8 million colours. Radiators in particular benefit from its very quiet operation and low heat generation thanks to the self-lubricating hydraulic bearing. The 9-blade design allows a very high airflow and efficient cooling. The anti-vibration pads also ensure low noise levels. As the sealing cap prevents the lubricant from escaping, a long service life is also guaranteed. The two rings, each with nine addressable LEDs, are independent of each other and impress with an even light coverage and high colour intensity. The extensive effects give your housing the finishing touch and give it a unique look. Using the included controller, which does not require a 5V ARGB port, seven breathtaking effects can be selected. Alternatively, the fans can be connected to a 5V ARGB port on the mainboard and synchronised via compatible software such as AsRock Polychrome, ASUS Aura Sync, GIGABYTE RGB Fusion and MSI Mystic Light Sync. Technical Data: Dimenson: 140 x 140 x 25 mm Interface: Fan 2510-4P, LED 5V RGB Header Fan Stated Voltage: 9.0 V Fan Rated Voltage: 12 V and 5 V Rated current: 0.17 A, LED 0.28 A Power Input: 12V – 5.76 W, 5V – 2.8 W Fan Speed: 500 - 1500 rpm Max. Air Pressure: 2.24 mm-H2O Max Air Flow: 82.23 CFM Noise: 33.5 dB-A Bearing Type: Hydraulic Bearing Life Expectation: 40,000 hrs, 25℃ Weight: 209 g
Go cooler than cool with the Ryujin III. An expansive 3.5-inch LCD screen displays live system stats, animated GIFs, or even your own custom artwork. Underneath, an 8th Gen Asetek pump quietly, paired with larger coolant tubes, keeps the advanced processors from Intel and AMD cool, while an embedded Axial-tech fan helps control motherboard VRM temps. And the coolant within flows through a higher capacity radiator graced with two ROG 120 mm ARGB fans that utilize magnets to make installation a snap.
AiO CPU-Kühler, Radiator aus Aluminium, Gummischläuche mit geflochtener Ummantelung, Pumpe mit max. 2.600 U/min, Vorinstallierte Kolink Umbra Void SP PWM Lüfter, Kompatibel mit vielen AMD- und Intel-Sockeln
Elevate your gaming rig with the ASUS ROG STRIX LC III 360 ARGB LCD processor liquid cooling system. Designed for gamers and enthusiasts, this high-performance cooling solution features three 120mm ROG STRIX AF-12S ARGB fans and a 7th Generation Asetek pump, ensuring your CPU stays cool even during intense gaming sessions. The customizable 2.1" Full Color IPS LCD display not only adds a touch of personalization to your setup but also allows for real-time system monitoring, keeping you informed of your system's performance. With ASUS Aura Sync compatibility, synchronize your cooling system's lighting effects with other Aura-enabled components and peripherals to create a cohesive and visually appealing gaming environment. The cooling system's broad compatibility with multiple Intel and AMD sockets ensures it fits seamlessly into your existing or new build. Additionally, the inclusion of anti-vibration rubber pads and 0dB Technology ensures that your gaming experience remains uninterrupted by noise. Installation is made easy with a comprehensive mounting kit, pre-applied thermal compound, and sleeved rubber tubes, allowing you to set up your cooling system with ease. Choose the ASUS ROG STRIX LC III 360 ARGB LCD for a cooling solution that combines performance, aesthetics, and convenience, ensuring your gaming rig stands out.
The CORSAIR iCUE Link RX140 MAX Starter Kit delivers an effective cooling solution with its high-performance 140 mm case fans. Engineered with Pulse-width modulation (PWM) support, these fans maintain optimal performance by automatically adjusting their rotation speed between 300 and 1600 rpm, ensuring efficient airflow that ranges from 27.5 to 103.5 cfm. With the inclusion of CORSAIR AirGuide technology, users can achieve directional cooling and improved airflow while minimizing noise levels from 10 to 36.4 dBA. This starter kit includes all necessary components, such as a power cable, Micro-USB cable, iCUE Link hub, and mounting kit, enabling easy installation and expansion for customized cooling configurations. The innovative Zero RPM fan mode allows the fans to stay silent when system temperatures are low, enhancing the overall user experience without sacrificing performance.
Tootekood: R-AG400-BKAMMN-GJDGTIN: 6933412729310Jahutid ja lisad
AG400 BK ARGB V2 | Air | LGA1150/LGA1151/LGA1155/LGA1200/LGA1700/LGA1851/SAM4/SAM5 | Fan speed 500~2100 RPM±10% | Air flow 75.89 cfm | Noise level, max 31.6 dB | Dimensions 125×92×154 mm | Colour Black | Weight 0.643 kg
Tootekood: TG-MP8-120-20-15-1RGTIN: 753677507340Jahutid ja lisad
Dimensions: 120 x 20 x 1,5mm Thermal conductivity: 8.0 W/mk Temperature range: -100°C / +250°C Maximum bridgeable gap: 1,5 mm Muu info: Ei juhi elektrit.
With its 360 mm radiator, the S90 RGB is a compact all-in-one water-cooling system that provides efficient cooling for all CPUs. Apart from providing visual highlights in 16.7 million colors, the addressable RGB PWM fans also ensure good cooling performance with a speed of up to 2,000 rpm. Installation is easy, thanks to the flexible, textile-braided tubing and the supplied mounting brackets.Full Fan Control The three RGB PWM fans that belong to the S90 RGB's 360 mm radiator not only have fully addressable RGB illumination, but their speed can also be controlled within a range from 600 rpm to 2,000 rpm. And for easy cable management, the fans can be daisy chained. Also the pump has PWM control for optimal performance and low noise volume.Best Possible Heat Dissipation Like the fans, the water block and pump unit is also equipped with RGB illumination and presents itself with a chic infinity mirror effect. The copper plate and the supplied high-quality DOWSIL™ thermal paste ensure the best possible heat dissipation.Compatible with All CPUs Thanks to the two enclosed mounting brackets for CPUs of all manufacturers, this all-in-one water-cooling solution is optimally prepared for direct use in the PC case.Flexible and Easy to Install Via the flexible tubing, installation in the PC case is as uncomplicated as possible. The tubing is textile braided for optimal protection against scratches.Rotatable Sharkoon Logo In order to ensure that the Sharkoon logo is always horizontal, it can be easily rotated to the desired position on the water block and pump unit. General CPU Socket Compatibility: Intel® Socket LGA 115X / 1366 / 1200 / 1700 / 2011 / 2011-3 / 2066 (Core i3 / i5 / i7 / i9 ) AMD® TR4 / TRX4 / AM5 / AM4 / AM2 / FM2 / FM1 / AM3+ / AM2+ / AM2 Weight: 1.86 kg Water Block & Pump Dimensions: Ø 71.5 mm x 52.3 mm Weight: 1.07 kg Cold Plate Material: Copper Pump Speed: 1,600 ~ 3,200 rpm ± 6 % Rated Voltage (Pump): 12 V Rated Voltage (LEDs): 5 V Rated Current (Pump): 0.35 A Rated Current (LEDs): 0.8 A Rated Power (Pump): 4.2 W Rated Power (LEDs): 4.0 W Pump Connector: 4-Pin PWM LED Connector: 4-Pin (5V-D-coded-G) Radiator Type: Brazed Radiator Dimensions (L x W x H): 392 x 121 x 27.5 mm Material: Aluminium Alloy Tubing Length: 400 mm Fans Number of Fans: 3 Dimensions (L x W x H): 120 x 120 x 25 mm Fan Speed: 600 ~ 2,000 rpm ± 10 % Max. Airflow: 131.93 m³/h Max. Air Pressure: 2.90 mmH₂O Max. Noise Level: 35 dB(A) Illumination: 12x Addressable RGB LED Rated Voltage (Fan): 12 V Rated Voltage (LEDs): 5 V Rated Current (Fan): 0.21 A Rated Current (LEDs): 0.54 A Rated Power (Fan): 2.52 W Rated Power (LEDs): 2.7 W Fan Connector: 4-Pin PWM LED Connector: 4-Pin (5V-D-coded-G) Fan Cable Length: 450 mm LED Cable Length: 450 mm Package Contents S90 RGB White AMD® Mounting Bracket Intel® Mounting Bracket Metal Backplate Mounting Screws Thermal Paste (DOWSIL™ TC-5888) Manual
The Enermax ELC-LMF-360-SF LiqMaxFlo SR is a high-performance AIO (All-In-One) CPU cooler designed to keep your system running cool and efficient. With a net weight of 2.42 kg, it offers robust cooling capabilities for demanding computing tasks.
