Arctic Freezer 36 (Black) High-quality finish with aluminium top plateWith its push-pull configuration, the Freezer 36 not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screw-fastened aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance. Performance-optimised successorInternal tests have shown that the Freezer 36 not only offers significant improvements compared to its predecessor models, the Freezer 35 and the still popular Freezer 34 eSports DUO, but also compared to competitor coolers. The simplified installation and increased performance make it suitable for beginners as well as an upgrade option. The tests were carried out in our HK laboratory; all coolers ran at maximum speed. Future-proof compatibilityThe Freezer 36 is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers need not worry that new coolers will be required for the new CPUs. We guarantee full compatibility. All Freezer 36 can be used with the new Intel LGA1851 socket without any restrictions. Improved fan mountingThanks to the innovative mounting system, the two fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already mounted. The Freezer 36 is therefore compatible with most 120 mm fans. LGA1851 | LGA1700 Contact FrameIntel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This leads to stresses in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). Under high thermal loads, this can lead to problems in the long term. The patent-pending mounting frame from ARCTIC does not deform the CPU, massively reduces the mechanical load on the CPU, is quick and easy to install and enables the cooler to be screwed onto the CPU backplate. The result is minimised mechanical stress on the mainboard and CPU, consistent cooling performance and quick and uncomplicated installation. High-quality plain bearingThanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimised and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also minimised. In this way, less heat is generated, less bearing noise is produced and the service life of the fan is significantly extended. Optimised heat sinkThe fins of the heatsink are open at the side and allow the pull fan to draw additional cool air from the housing through the heatsink. This side-flow design achieves even more efficient ventilation. P-fan with high static pressureARCTIC relies on the proven P fans, which are known for their powerful performance. The P series is particularly suitable for use on heat sinks and radiators. Due to the dense fin structure of heat sinks, the fans used achieve significantly better performance than fans designed for airflow thanks to their high static pressure. Large selection of variantsThe Freezer 36 is available in five different versions, all of which are equipped with two fans in a push-pull configuration. In addition to the standard model with aluminium heatsink design, a variant with a black heatsink is also available. For continuous operation, there is also the CO version, which is equipped with fans with double ball bearings. Alternatively, users can choose between a black and a white version with A-RGB fans. Quality you can rely onIn order to guarantee the durability of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the certainty that our products are not only outstanding in terms of their quality, but also in terms of their durability. A certainty that we are happy to pass on to our customers. That's why we offer a 6-year manufacturer's guarantee
Get high-performance cooling and display a favorite image or GIF, monitor real-time PC performance metrics, and more with NZXT CAM software.Pump features an embedded 1.54 square LCD screen to display real-time system info or custom images * Adjustable screen orientation accommodates pump head position Powerful Asetek pump provides optimal cooling and up to 2,800 RPM whisper-quiet operation Includes high-performance PWM fans with fluid dynamic bearings for optimal cooling Includes F140/F120 RGB Core fans Single breakout cable simplifies installation Rubber tubing is reinforced with nylon-braided sleeves to prevent leaks Control custom screen content, pump speed, and zero-noise fan curves with NZXT CAM Control custom screen content, RGB, pump speed, and zero-noise fan curves with NZXT CAM software.
The Lian Li GALAHAD II 240 Trinity SL-INF is a complete water cooling solution for your CPU. It features a 240mm radiator and two SL-INF 120mm fans for efficient cooling. The AIO cooler comes in a sleek black design with a beautiful infinity mirror effect. It also includes three interchangeable pump covers and angled fittings that can be freely rotated. Compatible with both AMD and Intel sockets, including LGA 1700, this cooler offers a quiet and stylish cooling solution for your system.
Noctua's NT-H1 is a pro-grade TIM solution for enthusiasts who demand both exceptional performance and maximum ease of use: A hybrid compound of different micro-particles allows for minimum thermal resistance, excellent ease of use and outstanding long-term stability.Toote värvValgeKaal1,4 gKasutamistemperatuur (T-T)-40 - 90 °CViskoossus2.49 g/cm³
Tootekood: NF-A12x15 PWM CH.BK.SGTIN: 9010018100464Jahutid ja lisad
Admittedly, the black Chromax fan takes a bit of getting used to, if you're used to Noctua's beige fans. However, the plain fan can be rounded off and individualized astonishingly well with the colored pads. You don't really have to go for silence with Noctua. Thanks to Noctua's AAO (Advanced Acoustic Optimisation) frame, the fan has an optimal performance/noise efficiency. Beyond that, the fan impresses with its efficiency that's second to none. The "Inner Surface Microstructure" offers a significant reduction of the rotation tone as well as an increase in pressure and airflow. Technical Data: Size: 120 x 120 x 15 mm Material: Plastic Speed: 1850 rpm (min. 450) Acoustical Noise: 23,9 dB(A) Air Flow Rate: 55,5 m³/h Operating Voltage: 12 V Input Power: 1,56 W, 0,13 A Connector: 4-Pin PWM MTTF: 150.000 h Warranty: 6 Years Scope of Delivery 8x NA-AVP7 chromax.black Anti-Vibration Pads 8x NA-AVP7 chromax.blue Anti-Vibration Pads 8x NA-AVP7 chromax.green Anti-Vibration Pads 8x NA-AVP7 chromax.red Anti-Vibration Pads 8x NA-AVP7 chromax.white Anti-Vibration Pads 8x NA-AVP7 chromax.yellow Anti-Vibration Pads 4x Fan Screws
Liquid Freezer III 240 A-RGB Multi Compatible All-in-One CPU Water Cooler with A-RGB Ready Out-of-the-Box - Easy Installation The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.
Teaming up eleven stator guide vanes with a specially conceived seven blade impeller the NFF12's Focused Flow? system creates outstanding static pressure and focuses the airflow for superior performance on heatsinks and radiators. At the same time a wide range of advanced aerodynamic design measures second generation SSOBearings and Noctua?s new custom designed PWM IC for fully automatic control guarantee astounding quietness of operation. The NFF12 comes with modular cabling integrated antivibration pads and two speed settings for full flexibility. Its commanding performance exhaustive set of features and Noctua's trusted premium quality make it an elite choice for use on air coolers radiators and other pressure demanding applications.
The NF-A8 is a highly optimised, premium quality quiet 80mm fan. Featuring Noctua’s AAO (Advanced Acoustic Optimisation) frame as well as sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A8 further improves the renowned quiet cooling performance of the award-winning NF-R8. The PWM version sports Noctua’s custom designed NE-FD1 IC for fully automatic speed control via 4-pin fan headers and comes with a Low-Noise-Adaptor to reduce the maximum speed during PWM control from 2200 to 1750rpm. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for the highest demands.Attachment screwedPower Connection PWM fan connectorFan Bearing SSOPower Input 0 - 0.96 watt(s)Voltage Range 0 - 12 VNumber of Revolutions 450 - 2200 rpmVolume 13.8 - 17.7 dB(A)Volumetric Flow 0 - 55.5 m3/h, 0 - 32.7 cfmDimensionsFans Fan 1 80 x 25 x 80 mmRoHS Compliant Yes
Pure Loop 2 280mm Quiet and efficient cooling Pure Loop 2 280mm is an impressively efficient and quiet All-in-One water cooler with ARGB backlight for users with overclocked systems. Impressively high cooling performance for all consumer processors 2 Pure Wings 3 140mm PWM high-speed fans offer high static pressure while operating very quietly The double-decoupled PWM pump reduces vibrations to an absolute minimum ARGB lighting on the cooling block, combined with an all-black design and aluminum elements for a unique and stylish look An easy-to-access filling port and included coolant bottle ensure long service life Flexible hoses and convenient installation ensure easy operation
The ideal compromise between noise and performance in combination with uniquely affordable price have made the BlackSilent fans the series with the most sold fans on the market! The new 140mm XK fans expand the portfolio with ultra-quiet 140mm fans. The extremely low starting voltage and the almost pulse-noise free motor make this 140mm fan the first choice! Of course an Auto-restart function as well as the dust-repelling fan blades and the almost inaudible NB-longlife bearing are implemented! Top-quality designed and developed in Germany!# In detail: Extremely low starting voltage of only 4,5V! Powerful yet silent operation: Smooth and extremely quiet operation Highest safety: Inverse polarity protection, overload protection, Restart-function, extremely fail-safe, 6 years warranty Extremely quiet bearing Long-lived and quiet NB-NanoSLI® bearings and much more With Auto-restart functionality Developed in Germany The (((Noiseblocker))) BlackSilent series is an inexpensive and reliable ultra silent fan series. The fans are developed in Germany and feature extremely quiet operation as well as high reliability. Other than the most cheap fans the low noise levels remain for years of operation on their low level. The reason is the choice of materials and precise manufacturing. Other than 95% of the so called "fan brands" (((Noiseblocker))) develops the fans themselves and uses high quality parts even in their "cheap" fans. The BlackSilent fans are simple and solid fans with quality components that naturally have their price. Unlike other competitors we give only realistic and serious technical data. We leave it to the customer to judge claims such as "400 000h MTBF" (provided by multiple competitors). By the way: 400 000 hours are more than 45 years... With the Rev. 3 of the BlackSilent series you purchase a reliable product optimized for silent operation. From now on we include NB-Slics (vibration absorbers) with the 80&92mm retail fans as well as screws with the 120mm versions. The further improved quality makes us confident that we can elongated the warranty period by one year to 3 years. The fans are available in the sizes 40, 60, 80, 92, 120 and 140mm. There are 2 versions of each size: The version 1 is almost inaudible and intended for standard systems, the version 2 is almost not noticeable in operation and developed for more powerful systems. Als Lager kommt unser besonders langlebiges NB-NanoSLI ® Gleitlager zum Einsatz. The failure rate was furthermore improved and is now 0,001% (before 0,15% of 100 000 units p.a.) The MTBF could be raised to 80 000 realistically with the Rev. 3 Warranty: 36 months Technical specifications: Dimensions: 140x140x25mm Weight: 135g Nominal voltage: 5-13,2V Starting voltage:
Tootekood: CNPS10X OPTIMA BLACK RGBGTIN: 8809213769696Jahutid ja lisad
Spectrum RGB LED Lighting Top Cover and FAN Patented 120mm dual blade (White) fan optimizes air flow to improve cooling performance. The DTH base delivers heat from the CPU to the heat sinks directly to improve cooling performance. Supported up to 180W of TDP with four heatpipes. Supported various Intel and AMD sockets. Spectrum RGB LED Top cover and Fan ALL NEW BLACK, WHITE DESIGNNew ZALMAN-inspired design with spectrum RGB LED top cover and fan brings a perfect upgrade for your PC.Easy Cable Connection CNPS 10X Optima II RGB Spectrum Effect automatically operates Top Cover and Fan. Y Cable is provided as seen below and you may connect it to motherboard to utilize LED features. Four Highly Performance Conductive Copper HeatpipesFour delicately designed copper heatpipes are directly compressed to the CPU which equally absorbs and rapidly dissipates heat.DTH(Direct Touch Heatpipes) BaseDTH(Direct Touch Heatpipes) technology is used to increase heat dissipation from the CPU and maximize cooling performance.Quiet Yet Effective CoolerOptimal design of the aluminum heat sinks and four heatpipes dissipate heat from CPU effectively (Supports up to 180W TDP).Hydraulic BearingHydraulic bearing, like ball bearing, does not come into contact with metal and lubricant layer replaces bearing. It causes very low noise, low heat, and is shock-resistant that is very durable and long-lasing. Quiet 120mm PWM Spectrum RGB LED FANOptimal design brings highly-efficient performance and 27 dB(A) low noise environment.Patented "Dual Blade Fan" by ZALMANDual airflow from impeller structure brings strong cooling performance while efficient air flow reduces noise.Dual Blade FanWhen the small inner wind tunnel and large outer wind are combined simultaneously, it creates greater air flow to improve cooling performance.Pre-Installed Anti-Vibration Rubber PadsTotal of 8 anti-vibration rubber-pads installed in front and back to minimize noise and vibration.Superior Performance of Aluminum Heat Sinks and Heatpipes Delicate designed four copper heatpipes and aluminum heat sinks are combined for best cooling performance. Heat sinks are evenly spaced to dissipate heat evenly and fast for best cooling performance.
The Eisbaer Aurora HPE Edition 360 CPU AIO water cooling features the extremely powerful NexXxos HPE Performance all-copper radiator equipped with the high-throughput Aurora Rise 120mm fans. All of the components used come from the classic DIY water cooling range and are also used for the most part in the enterprise products for servers. The Eisbaer LT Aurora can be expanded with additional components thanks to the quick-release fastener. Alphacool's Eisbaer Aurora HPE Edition 360 CPU AIO is a high performance all-in-one water cooling system that is as easy to install as an AIO, but offers the performance of a pre-assembled and pre-filled custom loop. New HPE Radiator! The NexXxos ST30 HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K. Radiator & Pump As with all Alphacool products, the radiator base is made of nickel-plated copper and is equipped with very fine cooling fins that are distributed over the entire base. A nozzle plate provides an accelerated flow over the cooling fins which increases the cooling performance. The water flow is optimized so that all areas of the cooler base are cooled evenly. The Eisbaer LT Aurora cooler uses the very compact and small DC-LT 2 pump. It provides enough power to add another component such as a GPU water cooler or another radiator to the circuit. Fan The Alphacool Rise Aurora fan offers a wide control range as well as superior Digital aRGB LED lighting. The individually controllable 5V aRGB LEDs paired with the fan's special design create unique effects. The fan can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. Additionally, it offers a Zero control, which allows the fan to be regulated down to 0 RPM and then starts at approximately 350 RPM. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m³/h) paired with high static pressure (3.17mm/H₂O). DIY connections and ES hoses The hose connections are from the normal DIY segment and therefore use a G1/4" thread. Thus, it is very easy to replace them. The black TPV hose comes, like the connectors, from the Alphacool ES series which is primarily installed in servers and workstations. The hose does not contain any plasticizers and, unlike classic PVC hoses, does not deform at high temperatures. The quick connector is not made of heavy brass, but of extremely light, durable and robust nylon. The quick disconnect is compatible with many other models in the Alphacool product line. Full Digital aRGB Illumination The cooler pump assembly and fans are fully equipped with Digital RGB LEDs, also known as addressable RGB or aRGB. Extensive effects can be set with the included controller or a Digital RGB controller on the motherboard. For a nice visual effect, of course, the illuminated polar bear on the cooler pump unit. For easier control via a controller, the fans and also the pump can be connected in series as a daisy chain. This enables a neat wiring of the individual LED components. Compatibility: Intel: 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD: AM4 / AM5 / TR4 / sTRX4 / sWRX8 / SP3 Technical data radiator L x W x H 391,5 x 124 x 30mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 2x G1/4" Possible fan size 120mm Possible fan assembly 3x one-sided / 6x both-sided Pressure tested 0,8 Bar Maximum working temperature 60°C Fin density 18 FPI Technical data cooler with pump L x W x H 66 x 66 x 69mm Material cooler bottom nickel plated copper Material cooler top & reservoir nylon, acrylic Threads 2x G1/4“ (+ 1x Fillport G1/4“) Pump type DC-LT2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow rate 75 L/h Voltage 12V DC Power consumption 4W Pressure tested 0,8 Bar Maximum working temperature 60°C Technical data fans L x W x H 120 x 120 x 25mm Speed 0-2500 rpm (+/- 10%) Bearing Sleeve Bearing Connection 4-Pin PWM Cable length 40cm Voltage 12V DC Current consumption 0,65A (0,72 max) Static pressure 3,17 mm/H₂O Max. air flow 118,9 m³/h Noise max. 31,5 dB(A) Number of digital aRGB LEDs 20 Technical data liquid Color clear Ingredient 1 destilled water (CAS-Nummer 7732-18-5) Ingredient 2 Glysantin (CAS-Nummer 1017-21-1) Working temperatures 15C°/+90°C Technical data quick-release coupling Dimensions 95 x 27mm Material Nylon Tube size 12,7/7,6mm Color black Technical data connectors Dimensions (connection straight) 24 x 18mm Quantity (connection straight) 2x Dimensions (connection 90°) 35 x 27 x 17mm Quantity (connection 90°) 2x Tube size 12,7/7,6mm Material brass Technical data tube Length 40cm Material TPV (EPDM/PP) Tube size 12,7/7,6mm Hardness grade 35 Shore-A to 50 Shore-D Maximum working temperature -50 to +155°C Color black
ROG STRIX LC II 360 ROG Strix LC II 360 all-in-one liquid CPU cooler with Aura Sync, Intel® LGA 1700, 1200, 1150, 1151, 1152, 1155, 1156, 2011, 2011-3, 2066 and AMD AM4/TR4 support and three ROG 120 mm radiator fans - Seventh Gen Asetek pump delivers exceptional cooling and minimal noise with an operating range starting at 840 rpm. - Three ROG-designed radiator fans provide optimized airflow and static pressure. - ARGB lighting on the NCVM-coated pump cover conveys a sleek, modern design. - Aesthetic perfectly complements ROG motherboards from center stage. - Reinforced, sleeved tubing offers increased durability. ROG STRIX LC II 360 Liquid, LGA1150/LGA1151/LGA1155/LGA1156/LGA1200/LGA1700/LGA2011/LGA2011-3/LGA2066/SAM4/STR4 Fan speed 800 - 2500 RPM, Air flow 80.95 cfm Fan light, Noise level, max 37.6 dB Dimensions Radiator Dimension: 121 x 394 x 27 mm ; Water block dimention: 80 x 80 x 45 mm ; Fan Dimension: 120 x 120 x 25 mm, Weight 2.3 kg
- Design For Fan Size 140MM To 120MM Application.- With Better Air Flow Solution.- Air Noise Reduction.SobilikArvuti korpusTüüpVentilaatorVentilaatori läbimõõt14 cmToetatud protsessoripesadEi ole toetatudÜhilduvad protsessoriseeriadEi ole toetatudToote värvMust
FD Silent Series 92mm Silent Series R3 new Product Description Fractal Design Silent Series R3 - case fan Product Type Case fan Package Content 4 screws Colour Black, white Fan Diameter 92 mm Fan Height 25 mm Fan Bearing Rifle bearing Rotation Speed 1500 rpm Air Flow 24.4 cfm Noise Level 18.3 dBA Power Connector 3-pin plug Rated Voltage 12 V Dimensions (WxDxH) 9.2 cm x 9.2 cm x 2.5 cm Weight 80 g
CL-W286-PL12SW-A, LGA1150/LGA1151/LGA1155/LGA1156/SAM1/SAM2/SAM3/SAM3+/SAM4/SFM2, Air flow 59.28 cfm, Noise level, max 28.2 dB, Dimensions 120 x 120 x 25 mm, Weight 1.24 kg
360-mm-Radiator von Corsair, Kupfer- und Messing-Aufbau, bis zu sechs 120-mm-Lüfter in Push/Pull-Konfiguration, 30 Millimeter Dicke und 16 FPI, 2x G1/4-Anschlüsse
Tootekirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a matte black straight adapter of 3/8 inch OD to G1 / 4 inch female, designed specifically for the inputs of the Eheim 1046 and 1048 pumps and the 1250 output. Before screwing in the adapter, the sealing ring should be coated with a lubricant, as otherwise it could be pulled out of its groove and exerts too much pressure on the plastic ring of the pump in the upper area. Alternatively, it is sufficient not to fully screw the adapter, but only up to the rubber itself. Technical Details:Material: brassColor: matt blackThread: G1 / 4 inch (internal thread)Compatibility: EHEIM 1046 (inlet) EHEIM 1048 (inlet) EHEIM 1250 (outlet)
The nickel-plated filler neck in the colour shiny silver from Bitspower is used when coolant is filled into the cooling circuit from the top of the housing. To do this, cut a small opening in the housing, place the connection through the hole or on the edge of the hole and screw it on from the other side with the screw ring. The filler neck can be connected to the cooling circuit via a normal G1/4" female thread connection. After filling, the upper side should be sealed with a sealing plug. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Thread: Inner G1/4" Thread Length: 15 mm
CORSAIR Hydro X Series XT Softline Tubing provides easy and flexible connections between your Hydro X Series equipment, putting your coolant on display with full transparency.
DEMCiflex Dust Filter 120mm Black/White DF0381Toote kirjeldus inglise keeles:Product description:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution, which in this case is suitable for 120 mm fans. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. This is very simple in many ways. Firstly, it is easy to see if cleaning is necessary again - as soon as the white filter fabric has a gray haze, you should do this task. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Finally, a few notes on the installation: First, the question arises, which fans have to be covered at all. As already mentioned, this applies exclusively to the sucking fans. But which are they? The safest way to recognize this is on the fan itself, with two arrows on the outside of the fan frame. If one of the two arrows points towards the interior, it is an aspirating fan. These are usually located on the front, side and bottom, whereas the rear and cover fans usually carry the air out of the housing and therefore need not be filtered. In order to maximize the filter effect, an overpressure in the housing can be generated. This means that more volume of air is forced into the housing than is being sucked out of the housing by other fans at the same time. This prevents air (and with it the dust) from entering the interior through other openings that may not have been filtered. If all fans are the same size, you should blow more fans into the housing than pull out. In this case, the power supply is to be counted as an additional, extracting fan, as long as it does not receive its supply (fan side) directly from the outside (occurs at floor mounting). If different fans with different sizes and speeds are used, the respective air volumes (m³ / h) in the data sheets give a good reference value, whereby in turn the total volume of the suction fans must be higher than that of the blowing out fans. Note: The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate. Figure 4 shows an example configuration on a housing (not included). As can be seen, the use of LED fans is possible because the transparent material hardly hampers the lighting. Technical details:Size (frame): 128 x 128 mmSize (filter): 105 x 105 mmCompatibility: 120 mm fan slotMaterial (filter): polyester meshColor: black (frame), white (filter)Mounting: magnetic bracket + mounting frameAdvantages: Fast installation No compatibility restriction Easy and quick cleaning Effective filter effect with high air permeability Durable fabric
The perfect solution for perfect curves in the Alphacool HardTubes is now available. Simply slide the silicon insert into the plexiglass tube and heat up the desired section. Thanks to the extreme heat resistance of silicon, the tube can be bent without the curved section buckling. After it cools, the silicon insert can simply be pulled out. Available for tubes with 10mm, 12mm, and now 13mm inner diameters, and each size comes in 30cm length for curves in shorter tubes or 100cm length for curves in longer tubes. Technical Details Length: 30cm Thickness: 13mm Colour: blue Scope of Delivery 1x Alphacool silicon bending insert 30cm for ID 1/2” / 13mm HardTubes - blue NoticeDue to the manufacturing process, the diameter can vary by 0.5 - 1mm.
With the Alphacool Core XP³ Acetal light you get a very compact CPU water block for all current mainstream sockets from AMD and Intel. It offers the typical high Alphacool quality paired with excellent performance at a fantastic price. High cooling capacity! The cooling plate has been optimised to give the best performance for the price point. The nickel-plated copper radiator bottom has a surface area of 56 x 56 mm with a cross-slot structure and only 0.4 x 1 mm thick pins through which the water can flow. Due to the extremely large cooling surface, the water can effectively absorb the heat from the radiator bottom and remove it from the CPU area. The pin area is about 27.6 x 37.6 mm ensuring that most mainstream CPUs are covered completely which guarantees high cooling performance. The new multiple slotted nozzle plate was developed especially for this cooler to achieve a perfect interplay of water flow and inflow of the base plate. Only the combination of all these little things ensures the high performance. Quick assembly! The mounting bracket is simply put over the CPU cooler. All mounting screws can be pre-assembled onto this Then you can simply screw it down. A well-illustrated manual with large render graphics is included so that the installation is easy to understand. Compatibility: Intel: 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD: AM5 / AM4 / AM3+ / AM3 / AM2 Technical data L x W x H 73 x 63 x 21mm Weigth 113g Max working temperature 60°C Material cooling plate nickel plated copper Material cooler top Acetal Connections 2 x G1/4"
The CORSAIR iCUE Link RX140 MAX RGB Expansion is designed to enhance cooling performance and aesthetics in any PC build. With a fan diameter of 140 mm and a height of 30 mm, this case fan operates at a rotation speed ranging from 300 to 1600 rpm, allowing for customized airflow that varies from 27.2 to 102.9 cfm. The Pulse-width modulation (PWM) support ensures efficient cooling while minimizing noise levels from 10 to 31 dBa, making it suitable for quiet environments or high-performance systems. Equipped with addressable RGB capabilities, the fan adds vibrant lighting options to your setup, seamlessly integrating with the iCUE software for personalized lighting effects. The magnetic dome bearing technology enhances durability and longevity, contributing to stable performance over time. This expansion pack comes complete with essential mounting hardware, including 8 screws for the radiator, 2 iCUE Link connectors, and a 13.5 cm iCUE Link cable, making installation straightforward and efficient.
