Toote kirjeldus inglise keeles:Dual panel-mounted socket threads for "internal/external" fittings on a computer chassis L-bracket. The female G 1/4 BSPP threaded couplings can be removed from the L-bracket and used as panel-mountable unions. Nickel-plated brass. This product may need to be temporarily disassembled during installation.
Alphacool's Eiszapfen series is future-oriented and characterized by excellent workmanship and high flow. Ball valves have always been a flow brake, making life difficult for each pump. Then, Alphacool has developed a ball valve represents no obstacle to a diameter of 10mm. The inside scoop closes absolutely tight, thus preventing further escape of liquid. On both sides all 1/4“ connections with a maximum thread length of 6mm can be screwed. This ball valve is available in two different color versions: Chrome and Deep Black. Technical Details: Dimensions (LxBxW): 35,4 x 36 x 22,7mm Color: Chrome Scope of delivery: Alphacool Eiszapfen 2-way ball valve G1 / 4 - Chrome
The EK Quantum Vector RE RTX 3070 from EK is a complete cooler for the Founders Edition of the RTX 3070 from Nvidia. The high-quality workmanship and the nickel-plated copper material used for the heat sink are striking. The nickel-plated copper covers all important areas of the graphics card, such as GPU, memory and voltage converter. The optimised channel structure results in very efficient and reliable cooling. Visually, the black acetal lid stands out, which is rounded off by a metallic trim. In addition, the cooler has four G1/4" connections, which, however, are found on the short side instead of on the upper long side as usual. Technical Data Dimensions: 205 x 98 x 21 mm Material Base: Nickel-Plated Copper Material Cover: Acetal Thread: 4x G1/4" Compatibility NVIDIA GeForce RTX 3070 (Founders Edition) Scope of Delivery EK-Quantum Vector RE RTX 3070 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
The retention rings attach the tops to both ends of the acrylic tubes. As they are included as standard with the Protium reservoirs, this item serves as a replacement or to replace rings of a different colour. Technische Details Material: Aluminium Colour: Black Compatibility: Protium series Scope of delivery 2x retention ring
The Protium reservoir from Singularity Computers is a 200mm tube with a diameter of 60mm. Together with the acrylic attachments, the reservoir reaches a height of 239mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 x 60 x 239 mm (L x W x H) Diameter: 60 mm Material: Acrylic (lid, base, reservoir), Aluminium (retention rings) Color: Black, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 200 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
Visual appearance combined with functionality. After the successful launch of the “Lian Li 011D Mini MK1“, now the Lian Li Mini is followed by the “MK2” front distro plate. It is made of high-quality and transparent acrylic glass. Despite the small case, our distro plate MK2 allows all radiators as well as GPU and CPU to be connected in the circuit. This is rendered possible by a large chamber and 5 channels with a total of 12 ports (incl. fill port & drain port). The “MK2” will replace the original tempered glass pane. The distro plate is made of high-quality acrylic and the accuracy of fit is assured. Additionally, we use EPDM seals to guarantee leak tightness. After the leak test, a test seal is glued on the back of the plate. The screw-fitting points provided by Lian Li are used for fixation. To mount the distro plate safely, 4 screws with sealing disc are included in the scope of delivery. It is important to ensure that only (!) “ECWB SE360 (2x) “ & “ ECA SE240 (1x)“ radiators are usable because the accuracy of fit can only be assured in this case. A frame sticker (you may choose between black or white) decorates the sides of the front. Thereby, mounting strips that are glued on the rear side of the distro are covered. Overview of Features smallest distro plate of the Lian Li series frame sticker, selectable in black or white clever plug-in system for effortless installation adapter allows perfect fit of a D5 pump compatible with EK-CoolStream SE360 2x and 1x SE240mm (radiators) Technical details Material: high-quality acrylic glass, plastic Manufacturing: CNC machining of the acrylic, assembly by hand Dimensions: without pump (W x H x D): 487 x 211 x 21 mm, with pump (W x H x D): 487 x 211 x 90 mm Colour: transparent Connections: 12x G1/4" Capacity: 435 ml Compatibility: 3x360mm fan space Scope of Delivery Lian Li Mini MK2 4x M3 screws
EK-Quantum Vector Strix RX 6800/6900 is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for ROG Strix RX 6800, 6800XT, 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector Strix RX 6800/6900 water block for ROG Strix GAMING RX 6800 and 6900 GPUs EK-Quantum Vector RX 6800/6900 water block is compatible with ASUS® ROG Strix GAMING Radeon RX 6800, RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector Strix RX 6800/6900 D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the Strix 6800/6900 water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 300.5x157x19.5mm Enclosed EK-Quantum Vector Strix RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
The transparent acrylic lid fits all Protium reservoirs from Singularity. It has four G1/4" connections and, due to its design, can be integrated into the water cooling circuit in a variety of ways. Technical Data Colour: Transparent Material: Acryl Thread: 4x G1/4" Compatibility: Protium reservoir
The Protium reservoir from Singularity Computers is a 200mm tube with a diameter of 60mm. Together with the attachments made of acetal and acrylic, the reservoir reaches a height of 239mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 x 60 x 239 mm (L x W x H) Diameter: 60 mm Material: Acetal (lid, base), Acrylic (reservoir), Aluminium (retention rings) Color: Black, Silver, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 200 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
The Alphacool Eisbaer Pro Aurora offers a much larger cooling surface than the normal Eisbaer Aurora. It was specially developed for extremely large CPU DIEs and fully covers processors such as the AMD Threadripper but also the AMD Ryzen CPUs. The Eisbaer Pro has also been designed for the Intel Socket 3647 to ensure the best possible cooling performance of the entire CPU. The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market. Large cooling surface The cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. With the included AM4 bracket, cooling an AMD Ryzen processor is also child's play. The cooling fins are 0.4mm thick and also have an optimal distance of 0.4mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3mm thick, which allows the heat to reach the water and be dissipated as quickly as possible. Pump The Eisbaer Pro Aurora cooler uses the very compact and small DC-LT 2 pump. It offers enough power to integrate other components such as a GPU water cooler or radiator into the water circuit. Lighting The entire Eisbaer Pro Aurora cooler is equipped with addressable, digital RGB LEDs. This makes it a real eye-catcher in the case. Of course, all digital RGB LEDs can be controlled as desired. Depending on the controller, almost all effects are possible. Usable fittings Connections that are too large mean that the fill port can no longer be used. We recommend the following: - up to and including 13/10 without restriction - 16/10 only in angled version - Connections larger than 16/10 should not be used Compatibility: Intel: 1700 / 2011 / 2011-3 / 2066 / 3647 Narrow & Square / LGA 4189 AMD: AM4 / TR4 / sTRX4 / SP3 / sWRX8 / AM5 Technical data cooler with pump L x W x H 64 x 79 x 54,3mm Material cooler bottom nickel plated copper Material cooler top acrylic Threads 2x G1/4“ (+ 1x Fillport G1/4“) Pump type DC-LT2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow 75 L/h Voltage 12V DC Power consumption 4W Pressure tested 0,8 Bar Maximum working temperature 60°C Number of LEDs 10x Digital aRGB LEDs
Fan ZM-AF 120 black The ZM-AF 120 fan is not only a computer accessory, but above all a guarantee of proper cooling of the case. Thanks to its dimensions of 120 x 120 x 26 mm and active air cooling, it ensures optimal operation of computer components even during intensive use. The parameters of this fan are impressive - a maximum speed of 2000 rpm and a minimum speed of 600 rpm allow for precise adjustment of the fan's operation to current needs. Additionally, the noise level of 29.7 dB makes using the computer comfortable. The ZM-AF 120 fan is characterized by high quality of workmanship, which translates into its durability and reliability. Thanks to the 4-pin connector, installation is quick and easy, even for less experienced users.
The stylish ball valve of Bitspower in the colour shiny silver, allows the stopping of the cooling circuit and is ideal for systems where regular modifications are made. At both ends the ball valve has two G1/4" female threads, for two suitable connections. The material is nickel-plated brass. Technical Data: Material: Nickel-Plated Brass Main Color: Shiny Silver Handle Color: Black Thread: Inner G1/4" x2
The nickel-plated adapter from Bitspower in the color shiny black, has an angle of up to 90 degrees, a G1/4" internal thread and a G1/4" external thread. The special feature of this adapter are the three swivel joints, so that the alignment of e.g. tubes becomes even easier and more flexible. Technical Data: Material: Nickel-Plated Brass Main Color: Shiny Black Angle: up to 90° Thread: 1x G1/4", 1x Inner G1/4" Thread Length: 5 mm
Set aus drei 120-mm-Gehäuselüftern, max. Drehzahl von 1.500 U/min, max. Lautstärke von 30 dB(A), 4-Pin-PWM-Anschluss, bietet adressierbare RGB-Beleuchtung
120-mm-PWM-Lüfter von Lian Li, einzigartiges Stecksystem für weniger Kabelsalat, mit adressierbaren RGB-LEDs, Unendlichkeitsspiegeleffekt an Seite und Front, max. 2.100 U/min, max. 104 m³/h Fördervolumen, max. 2,66 mmH2O statischer Druck
3x 120-mm PWM fans optimized for use in cases Daisy-chain for less cable clutter Good cooling at up to 1,800 rpm and quiet operation at a maximum of 23.8 dB(A) Stylish lighting thanks to addressable RGB LEDs Regular orientation for standard airflow High airflow of 99.46 m³/h Jonsbo ZL-120B Reverse ARGB fan in detail The Jonsbo ZL-120B Reverse is a powerful 120-mm fan with a reverse design, specially developed for use as a case fan. Thanks to the reverse design, the fan can move air in the opposite direction, which ensures more efficient cooling in certain case configurations. It features daisy-chain, a plug-in system that reduces the number of cables in your gaming PC and contributes to a cleaner look. With its addressable RGB lighting, it doesn’t just look stylish but also delivers plenty of power. Thanks to the built-in hydraulic bearing, you benefit from a significantly extended lifespan for your device, allowing for reliable and low-maintenance operation in the long term. Efficient cooling at low noise levels The Jonsbo ZL-120B Reverse adjusts its speed via a PWM signal according to the system’s requirements. This enables precise adjustment of the fan speed from 800 to 1,800 rpm. Even at full load, it operates at a volume of just 28.8 dB(A). Each corner is also fitted with rubber pads to decouple vibrations and minimize noise. With an airflow of up to 99.46 m³/h and a static pressure of 2.0 mmH₂O, the CPU is effectively cooled.
Tootekood: CR-3000E COLOR BLACKGTIN: 6970620554068Jahutid ja lisad
Extrem leistungsfähiger Dual-Tower-Kühler mit 260 W TDP Sechs 6-mm-Heatpipes 2x PWM-Lüfter im 120-mm-Format Hohe Kompatibilität zu AMD und Intel Halterung für einfache Montage Integrierte Beleuchtung an Lüftern und Rahmen Der Jonsbo CR-3000E CPU-Kühler: Der Jonsbo CR-3000E CPU-Kühler bietet durch seine sechs Heatpipes und den PWM-Lüfter eine extrem hohe Kühlleistung. Der außerdem sehr leise Kühler besitzt mit 260 W TDP immense Kühlreserven für übertaktete CPUs und lässt sich trotz seiner Größe auch bei installiertem Mainboard montieren. Schlichtes Design mit starker Kühlleistung Beim CR-3000E handelt es sich um einen leistungsfähigen Dualturm-Kühler, der durch seine beiden Lüfter eine sehr effiziente und leise Kühlung ermöglicht. Die laufruhigen Lüftermotoren sorgen dabei für reduzierte Vibrationen und in Verbindung mit dem Lager für eine sehr lange Haltbarkeit. Perfekte Kühlung für deine CPU inklusive Lichteffekten Dank sechs Hochleistungs-Heatpipes gewährleistet der Kühlkörper einen exzellenten Wärme-Abtransport. Die Lamellenfläche des Kühlers ist durch das Dualturm-Design sehr groß, sodass besonders viel Wärme an die durchströmende Luft weitergegeben werden kann. Zusätzlich ist noch eine Beleuchtung verbaut, die dein Setup aufwertet und für einen extra hingucker sorgt.
The new premium fan series is based on the NB-Blacksilent-Chassis and is equipped with the excellent electronics module NB-EKA Plus and NB-NanoSLI bearings. Both are features that were so far used only in the more complex Multiframe series. Besides the technologically advanced components this fan is also equipped with an individually adaptive cable management. The fan is shipped with a newly developed mounting kit for vibration-free mounting which consists of an optimized "NB-Silentframe" silicone frame with suitable counter-pieces and knurled nuts for tool-free installation. Technical specifications: Dimensions: 140x140x25mm Colour: Black Weight: 135g Nominal voltage: 12V Starting voltage: 4,5V Current draw: 0,2A Nominal speed: 1700rpm (+/-10%) Airflow: 153m³/h / 90.056CFM Noise emission: 27 dB(A) MTBF (25°C): 120000hrs Connector: 3-Pin Molex plug with rpm lead Extent of delivery: 1x Noiseblocker NB-BlackSilentPRO PK3 ( 140x140x25mm ) 1x Fan decoupling 1x 3 PIN fan extension 20cm 1x 3 PIN fan extension 50cm 4x Mounting screws 4x Knurled nuts This product has been reviewed for you: Tech-Review Hardware-academy
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®.(Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316, Dremel® - Art.No: 32196 and 32229) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 60cm WARNING:Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note:Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention:This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
The EK-Quantum Vector Strix RTX 3070 D-RGB from EK is a complete cooler for the graphics card of the ROG Strix RTX 3070 from ASUS. The high-quality workmanship and the nickel-plated copper material used for the heat sink are striking. The copper covers all important areas of the graphics card, such as GPU, memory and voltage converter. The optimised channel structure provides very efficient and reliable cooling. Visually, the cooler is rounded off with a black acetal lid and has four G1/4" connections. But there's more: an addressable D-RGB strip is also integrated, which provides a little illumination even on dark gaming days. The graphics card cooler is compatible with the common RGB synchronisation technologies of all major mainboard manufacturers. Technical Data Material: Nickel-Plated Copper (bottom), Acetal (cover) Color: Black Thread: 4x G1/4" D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) D-RGB LED count: 6 D-RGB cable length: 500mm Compatibility Asus ROG Strix RTX 3070 Scope of Delivery EK-Quantum Vector Strix RTX 3070 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
Leistungsstarker CPU-Kühler von Aerocool, integrierte digital adressierbare RGB-Beleuchtung, ein 120-mm-PWM-Lüfter mit ARGB-LEDs, TDP von 145 Watt, hohe Kompatibilität zu Intel- und AMD-Sockeln
The vertical bracket from Singularity can be used to mount a Protium series reservoir or pump attachment vertically on a 120 or 140 fan slot of a radiator. It is even possible to mount two reservoirs or pump attachments. Technical Data Colour: Silver Material: Aluminium (mounting plates), Stainless Steel (screws) Scope of Delivery: 2x SC Universal 120/140 Back Plate Mounting Plate 2x Vertical mounting plate 4x M4 Button Head Hex (10 mm) 4x M4 Countersunk Hex (10 mm) 4x M4 Washers 4x M4 Nut
