Get high-performance cooling and display a favorite image or GIF, monitor real-time PC performance metrics, and more with NZXT CAM software.Pump features an embedded 1.54 square LCD screen to display real-time system info or custom images * Adjustable screen orientation accommodates pump head position Powerful Asetek pump provides optimal cooling and up to 2,800 RPM whisper-quiet operation Includes high-performance PWM fans with fluid dynamic bearings for optimal cooling Includes F140/F120 RGB Core fans Single breakout cable simplifies installation Rubber tubing is reinforced with nylon-braided sleeves to prevent leaks Control custom screen content, pump speed, and zero-noise fan curves with NZXT CAM Control custom screen content, RGB, pump speed, and zero-noise fan curves with NZXT CAM software.
XC061 | M705D The compact M705D is a tower cooler with double fan from the A+ series. It has four extremely powerful black heat pipes, which dissipate 220W of waste heat to the countless cooling fins and thus predestine it for potent multi-core processors. Due to the direct contact of the heat pipes, the heat transfer between CPU and cooler is extremely efficient and very even. Suitable for cooling processors with very high levels of waste heat. The multi-socket means that the cooler can be used on all current Intel and AMD sockets. In addition to the double heat sink and the two PWM-controlled 120mm fans, the scope of delivery includes a holding module for the LGA socket 1700/2066/2011/1200/1151/1150/1155/1156 / and AMD AM4, illustrated assembly instructions and a tube of thermal paste. - Elegant black design with top cover - One heat sink with lamellar design ensure efficient cooling of the CPU and all surrounding components - Two black 120mm PWM fans, liquid-stored - Five 6mm copper heat pipes for maximum heat dissipation - Hotspots are avoided by slightly protruding the fans on the top and bottom - The fans can be mounted on both sides of the heat sinks - Suitable for all common AMD & INTEL sockets Performance A+ M504D, SA/SAM4/SAM5 Fan speed 700 - 1600 ± 10%, Noise level, max 32.5 dB Dimensions 128 x 108 x 150mm, Weight 0.685 kg
Pure Loop 2 280mm Quiet and efficient cooling Pure Loop 2 280mm is an impressively efficient and quiet All-in-One water cooler with ARGB backlight for users with overclocked systems. Impressively high cooling performance for all consumer processors 2 Pure Wings 3 140mm PWM high-speed fans offer high static pressure while operating very quietly The double-decoupled PWM pump reduces vibrations to an absolute minimum ARGB lighting on the cooling block, combined with an all-black design and aluminum elements for a unique and stylish look An easy-to-access filling port and included coolant bottle ensure long service life Flexible hoses and convenient installation ensure easy operation
The all-in-one liquid cooling system LQ360PRO.ARGB is the perfect companion for gaming adventures with the highest performance demands. With a TDP of 350 watts, it's capable of cooling even highly heated CPUs without any loss in performance. Thanks to the Quick-Mounting-System, installation is easy and fast. It supports all current CPUs from AMD and Intel. The design of the liquid cooling system features an elegant black metallic look. The square pump head, equipped with a large, powerful copper cooling plate and subtle ARGB lighting, integrates seamlessly and adds a stylish touch. The elegantly sleeved, flexible black hoses can be comfortably routed within the case in any configuration. The fans of the LQ360PRO.ARGB ensure smooth operation even during intense gaming sessions. Only a barely noticeable whisper of the cooling airflow can be heard. The embossed logo on the fans complements the metallic look, emphasizing the elegance of the liquid cooling system. The ARGB lighting of the fans makes the PC shine in the selected colors, captivating with its fluid and vibrant display of colors.
PURE LOOP 2 240mm Silent and powerful cooling The Pure Loop 2 240mm is an impressively powerful and quiet all-in-one water cooler with ARGB illumination for users with lightly overclocked systems. Extremely high cooling performance for all consumer processors 2 Pure Wings 3 120mm PWM high-speed fans offer high static pressure with very quiet operation Dual decoupled PWM pump reduces vibrations to an absolute minimum ARGB illumination on the cooling block, combined with all-black design and aluminium elements for a unique and stylish appearance Easily accessible filling port and included coolant bottle guarantee long service life Flexible hoses and convenient installation ensure easy handling 3-year manufacturer's warranty
The Eisbaer Aurora HPE Edition 360 CPU AIO water cooling features the extremely powerful NexXxos HPE Performance all-copper radiator equipped with the high-throughput Aurora Rise 120mm fans. All of the components used come from the classic DIY water cooling range and are also used for the most part in the enterprise products for servers. The Eisbaer LT Aurora can be expanded with additional components thanks to the quick-release fastener. Alphacool's Eisbaer Aurora HPE Edition 360 CPU AIO is a high performance all-in-one water cooling system that is as easy to install as an AIO, but offers the performance of a pre-assembled and pre-filled custom loop. New HPE Radiator! The NexXxos ST30 HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K. Radiator & Pump As with all Alphacool products, the radiator base is made of nickel-plated copper and is equipped with very fine cooling fins that are distributed over the entire base. A nozzle plate provides an accelerated flow over the cooling fins which increases the cooling performance. The water flow is optimized so that all areas of the cooler base are cooled evenly. The Eisbaer LT Aurora cooler uses the very compact and small DC-LT 2 pump. It provides enough power to add another component such as a GPU water cooler or another radiator to the circuit. Fan The Alphacool Rise Aurora fan offers a wide control range as well as superior Digital aRGB LED lighting. The individually controllable 5V aRGB LEDs paired with the fan's special design create unique effects. The fan can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. Additionally, it offers a Zero control, which allows the fan to be regulated down to 0 RPM and then starts at approximately 350 RPM. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m³/h) paired with high static pressure (3.17mm/H₂O). DIY connections and ES hoses The hose connections are from the normal DIY segment and therefore use a G1/4" thread. Thus, it is very easy to replace them. The black TPV hose comes, like the connectors, from the Alphacool ES series which is primarily installed in servers and workstations. The hose does not contain any plasticizers and, unlike classic PVC hoses, does not deform at high temperatures. The quick connector is not made of heavy brass, but of extremely light, durable and robust nylon. The quick disconnect is compatible with many other models in the Alphacool product line. Full Digital aRGB Illumination The cooler pump assembly and fans are fully equipped with Digital RGB LEDs, also known as addressable RGB or aRGB. Extensive effects can be set with the included controller or a Digital RGB controller on the motherboard. For a nice visual effect, of course, the illuminated polar bear on the cooler pump unit. For easier control via a controller, the fans and also the pump can be connected in series as a daisy chain. This enables a neat wiring of the individual LED components. Compatibility: Intel: 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD: AM4 / AM5 / TR4 / sTRX4 / sWRX8 / SP3 Technical data radiator L x W x H 391,5 x 124 x 30mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 2x G1/4" Possible fan size 120mm Possible fan assembly 3x one-sided / 6x both-sided Pressure tested 0,8 Bar Maximum working temperature 60°C Fin density 18 FPI Technical data cooler with pump L x W x H 66 x 66 x 69mm Material cooler bottom nickel plated copper Material cooler top & reservoir nylon, acrylic Threads 2x G1/4“ (+ 1x Fillport G1/4“) Pump type DC-LT2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow rate 75 L/h Voltage 12V DC Power consumption 4W Pressure tested 0,8 Bar Maximum working temperature 60°C Technical data fans L x W x H 120 x 120 x 25mm Speed 0-2500 rpm (+/- 10%) Bearing Sleeve Bearing Connection 4-Pin PWM Cable length 40cm Voltage 12V DC Current consumption 0,65A (0,72 max) Static pressure 3,17 mm/H₂O Max. air flow 118,9 m³/h Noise max. 31,5 dB(A) Number of digital aRGB LEDs 20 Technical data liquid Color clear Ingredient 1 destilled water (CAS-Nummer 7732-18-5) Ingredient 2 Glysantin (CAS-Nummer 1017-21-1) Working temperatures 15C°/+90°C Technical data quick-release coupling Dimensions 95 x 27mm Material Nylon Tube size 12,7/7,6mm Color black Technical data connectors Dimensions (connection straight) 24 x 18mm Quantity (connection straight) 2x Dimensions (connection 90°) 35 x 27 x 17mm Quantity (connection 90°) 2x Tube size 12,7/7,6mm Material brass Technical data tube Length 40cm Material TPV (EPDM/PP) Tube size 12,7/7,6mm Hardness grade 35 Shore-A to 50 Shore-D Maximum working temperature -50 to +155°C Color black
DEMCiflex dust filter 120mm Black DF0003Toote kirjeldus inglise keeles:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution, which in this case is suitable for 120 mm fans. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Finally, a few notes on the installation: First, the question arises, which fans have to be covered at all. As already mentioned, this applies exclusively to the sucking fans. But which are they? The safest way to recognize this is on the fan itself, with two arrows on the outside or inside of the fan frame. If one of the two arrows points towards the interior or if the rotor suspension is aligned with the interior, this is an aspirating fan. These are usually located on the front, side and bottom, whereas the rear and cover fans usually carry the air out of the housing and therefore need not be filtered. In order to maximize the filter effect, an overpressure in the housing can be generated. This means that more volume of air is forced into the housing than is being sucked out of the housing by other fans at the same time. This prevents air (and with it the dust) from entering the interior through other openings that may not have been filtered. If all fans are the same size, you should blow more fans into the housing than pull out. In this case, the power supply is to be counted as an additional, extracting fan, as long as it does not receive its supply (fan side) directly from the outside (occurs at floor mounting). If different fans with different sizes and speeds are used, the respective air volumes (m³ / h) in the data sheets give a good reference value, whereby in turn the total volume of the suction fans must be higher than that of the blowing out fans. Note: The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate. Technical details:Size (frame): 128 x 128 mmSize (filter): 105 x 105 mmCompatibility: 120 mm fan slotMaterial (filter): polyester meshColor: black (frame), black (filter)Mounting: magnetic bracket + mounting frameAdvantages: Fast installation No compatibility restriction Easy and quick cleaning Effective filter effect with high air permeability Durable fabric
Tootekood: BP-NCCLT12AC-L1000GTIN: 4719552222933Jahutid ja lisad
Toote kirjeldus inglise keeles:With the Crystal Link Tubes, Waku specialist Bitspower presents a very interesting solution for water enthusiasts who are not completely unskilled in their craft. These are solid tubes of acrylic plastic, which can be cut by the user to the required length and bent with the aid of a heat source suitable. The resulting possible connection of the individual water cooling parts with longer dead straight sections and exactly curved radii is a visually appealing alternative to the traditional connection by means of hoses dar. For example, if you use a hot air gun and the acrylic tube heated with it for some time, the material is so soft that one It can easily bend into the desired radius and holds as long until the acrylic has cooled and the now bent tube hardens again. It does not get any more individual Everything you need can be created here and even adjusted later. Ideally, in addition to a hot air gun and gloves you have a silicone rod (or something similar flexible, but heat-resistant) to hand, which one pushes into the tube in advance, so that the soft tube gets no kink when bending. The transparent-blue Crystal Link Tube offered here has an outer diameter of 12 mm and an inner diameter of 10 mm. The length is 100 cm. It can be used in conjunction with bit-power adapter fittings from the C47, C48 and ML series. Technical details:Material: acrylic glass (PMMA)Colour blueOuter diameter: 12 mmInner diameter: 10 mmLength: 1,000 mmCompatibility: C47 Series Bit Power Fittings and Adapters C48 Bit Power Fittings and Adapters C48 Series Bit Power Fittings and Adapters
The perfect solution for perfect curves in the Alphacool HardTubes is now available. Simply slide the silicon insert into the plexiglass tube and heat up the desired section. Thanks to the extreme heat resistance of silicon, the tube can be bent without the curved section buckling. After it cools, the silicon insert can simply be pulled out. Available for tubes with 10mm, 12mm, and now 13mm inner diameters, and each size comes in 30cm length for curves in shorter tubes or 100cm length for curves in longer tubes. Technical Details Length: 30cm Thickness: 13mm Colour: blue Scope of Delivery 1x Alphacool silicon bending insert 30cm for ID 1/2” / 13mm HardTubes - blue NoticeDue to the manufacturing process, the diameter can vary by 0.5 - 1mm.
With the Alphacool Core XP³ Acetal light you get a very compact CPU water block for all current mainstream sockets from AMD and Intel. It offers the typical high Alphacool quality paired with excellent performance at a fantastic price. High cooling capacity! The cooling plate has been optimised to give the best performance for the price point. The nickel-plated copper radiator bottom has a surface area of 56 x 56 mm with a cross-slot structure and only 0.4 x 1 mm thick pins through which the water can flow. Due to the extremely large cooling surface, the water can effectively absorb the heat from the radiator bottom and remove it from the CPU area. The pin area is about 27.6 x 37.6 mm ensuring that most mainstream CPUs are covered completely which guarantees high cooling performance. The new multiple slotted nozzle plate was developed especially for this cooler to achieve a perfect interplay of water flow and inflow of the base plate. Only the combination of all these little things ensures the high performance. Quick assembly! The mounting bracket is simply put over the CPU cooler. All mounting screws can be pre-assembled onto this Then you can simply screw it down. A well-illustrated manual with large render graphics is included so that the installation is easy to understand. Compatibility: Intel: 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD: AM5 / AM4 / AM3+ / AM3 / AM2 Technical data L x W x H 73 x 63 x 21mm Weigth 113g Max working temperature 60°C Material cooling plate nickel plated copper Material cooler top Acetal Connections 2 x G1/4"
The Alphacool ES quick-release connector is optimized for use in server and workstation systems. It is characterized by precise manufacturing quality, excellent water flow and a secure click mechanism for sealing.Maximum flow rateOther quick couplings can negatively affect the flow of water. The quick coupling has therefore been fundamentally redesigned so that the water flow is hardly disrupted. Particular emphasis was placed on minimal processing tolerances.Quick and easyThe ES quick connectors from Alphacool simplify the assembly of server and workstation systems. Thanks to the convenient handling, complex systems can be connected quickly and easily. To open the quick-release fastener, the outer ring is pulled back. The seal closes immediately and prevents coolant from escaping. To lock the quick-release fasteners, simply push them into each other. A clicking noise confirms secure locking.Note: To avoid damaging the O-ring, do not open or close the quick-release fastener when it is dry. Technical dataDimensions (L x D)67 x 28mmWeight150gMaterielnickel-plated brass, plasticThread2x 1/4" ITColorchrome, black
Toote kirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a matte black, straight adapter with two G1 / 4-inch external threads. The special feature: The length of the adapter can be flexibly adjusted between 41 and 69 mm (measured without thread). For this purpose, only one nut is loosened, one side pulled out as desired and then fixed again with the union nut. Technical details:Material: brass, matt blackConnections: male thread: 2x G1 / 4 inchLength: 41 - 69 mm (variable)
The construction of a quiet computer is always a challenge, especially if performance and proper cooling are also a factor. The SF01 consists of two foam plastic sheets which help with noise absorption with minimal pressure inside of the system. Each sheet has a large surface and is made from very dense foam plastic with a thickness of 4mm. This ensures good noise reduction and flexible integration. Special features: Special high-grade EPOM foam plastic material for noise absorption Excellent adhesive properties even at high temperatures Simply cut to size: Fits in any computer case Contains two foam sheets Technical specifications: Colour: Black Material: EPOM Dimensions (WxLxD): 530x380x4mm Extent of delivery: 1x Silverstone noise absorption sheet (SST-SF01)
This bracket from BarrowCH, made of aluminium, allows 360 radiators to be mounted at an angle other than that specified by the enclosure and sometimes even in rather unusual places, such as externally. Technical Data Material: Aluminium Color: Black Radiator compatibility: 360
