Material: EPDM Color: Black, not UV-reactive Inner diameter: 9,5 mm (3/8") Outer diameter: 15,9 mm (5/8") Operating temperature range: -30 °C to 110 °C Compatible with all known widely used coolants Retail packaging: 3m per box (~10ft) Conforms with: RoHS.
This pump is the first pump worldwide which is used in mass-produced water cooled workstations and is ideal for the watercooling of processors and electronic components. Due to its compact size and its power it can be used for many applications. This DC pump is an electronically commuted ball motor pump with an estimated lifespan of more than 50.000hrs at 12V. The only moving part on the pump is the spherically shaped Rotor unit which is sitting on an ultra-hard, wear-resistant ceramics bearing ball. A conventional shaft with bearings and seals is not used or needed. The spherical bearing of the rotor unit on the ceramics bearing ball has many advantages: The development of bearing clearance is technically impossible which results in the impossibility of noise level increase over the lifespan of the pump. The bearing is self-adjusting, making the pump consistently quiet in operation over the full lifespan. The pump is directly lubricated by the coolant (wet-running pump). Therefore no maintenance is required. As the rotor is magnetically held in place even small dirt particles pose no problem for the mechanism, a blocking of the pump is not possible under normal operating conditions. Even after a long period of standstill reliable operation is ensured. The permanent magnetic rotor unit is frictionlessly driven by a magnetic field which is produced by the surrounding stator. The stator is completely built around the rotor, therefore the pump is with its 38mm only slightly higher than the stator unit. It therefore fits a in almost any PC case, may it be Super tower or Barebone. A separate magnetic shielding is usually not required. The ball motor principle allows powerful yet power-saving operation. The pump can be regulated by power variations of the DC operating voltage over a wide range. All parts in touch with the coolant are completely corrosion free. Technical details: Dimensions (WxDxH): 62x62x38mm (without fittings) Motor: Electronically commuted ball bearing motor Nominal voltage: 12V DC Nominal power consumption: 18W Certified voltage: 6 to 13,2 Pressure head at 12V: 4,7m Maximum flow rate: 600l/h Coolant: Water /Glycol/Glycol mixtures Maximum system temperature: 60°C Materials in contact with the coolant: Stainless steel 1.4571, PPS-GF40, EPDM O-Rings, Aluminium oxide, hard coal Fittings: 2x 3/8" barbed fittings (For hoses with an outer diameter of 10mm and 8mm inner diameter) Pumpentacho: Mit 3-Pin Molex Stecker als Pumpentachoausgang (für Mainboards oder Steuergeräte) Hinweis: Die Pumpe ist die neusten Revision. WICHTIG: Wir empfehlen die Verwendung von schmierfähigem Wasserzusatz (wie z.B. AT Protect Plus oder Innovatek Protect). Anti-Corro-Fluid ist nicht zu empfehlen. ACHTUNG: Aufgrund der Leistung der Pumpe darf die nur in einem Kreislauf mit min. 1 Kühler betrieben werden. Beim Betrieb ohne Last kann die Pumpe durchbrennen. Important: The Laing pump's electronics are not waterproof. Please make sure that the electronic components do not come in contact with water during installation or when working on the pump. When replacing the top always ensure a proper fit of the O-ring seal and avoid spills when filling the Laing reservoir. Damages due to water in the electronic components are not replaced by Laing! Why are there Swiftech and Laing Versions? Are they different? The latter question can be answered quickly: No! Here an explanation: Lain produces all pumps in Hungary. They are just labelled differently for Overseas markets and the European market. The pumps themselves are threfore exactly identical. The overseas version has Swiftech as a distributor and the European version is neutrally black. The cheaper Swiftech pumps are usually shipped with decouplers, the Laing pumps usually not. The power, pressure head, flow rates. etc. are exactly the same. This product has been tested for you: Aquainfos Overclockingstation Userreview im Liquidluxx inkl. Video. Awardfabrik Hardware-academy M4GIC Bedienungsanleitung (DE, EN) Please note: Pump control possible with Heatmaster! Note: For pump control via the Heatmaster the Alphacool pump adaptor cable (Item No. 52171) is required!
StarTech.com High Air Flow 9.25 cm Dual Ball Bearing Case Fan with TX3 Connector. Sobilik: Arvuti korpus, Müratase (suur kiirus): 33 dB. Toote värv: Must. Kaal: 108 g, Pakendi laius: 26 mm, Pakendi sügavus: 157 mm. Mõõdud (l x s x ...
This temperature sensor is equipped with a G1/4" inner- and a G1/4" outer thread and can therefore be integrated easily even directly on a waterblock or radiator. The sensor is equipped with a 60cm long cable and has a two-pin plug for connection. Technical details: Connection thread G1/4" Main body nickel coated brass Cover ring Delrin Cable length: 60cm Inner diameter: 7,95mm Compatible with: aquaero 5 XT / PRO / LTaquaero 3.07, aquaero 4.00 aquastream XT Ultra aquaduct versions iwth an external sensor connector (360XT, 720XT) Sensor inputs on many Mainboards etc. Alphacool Heatmaster Innovatek Fan-O-Matic Lian Li Multipanel Scythe Kaze T-Balancer
This connection cable can be used for connection of different devices from aquacomputer via the aquabus interface. Technical specifications: 4-Pin molex sockets (compatible with fan connectors), 1:1 connection Length approx 70cm incl. connectors
Mounted on an poweradjust 3 controller, this passive heat sink improves heat dissipation and thereby increases the maximum power output of the fan channel. Scope of delivery:Aluminum heat sink for poweradjust 3Thermally conductive padMounting materialCompatible with:poweradjust 3 (52247/52246)Please note: poweradjust 3 is not included in delivery! Not compatible with bezel sets 52179/52183!
The nickel-plated adapter from Bitspower in the color shiny black, has a G1/4 inch internal thread and a G1/4 inch external thread. Technical Data: Material: Nickel-Plated Brass Main Color: Shiny Black Thread: 1x G1/4", 1x Inner G1/4" Thread Length: 5 mm
The extension of Bitspower in matt black has a G1/4" internal thread and a G1/4" external thread. Without external thread, the extension extends the tubing of a water cooler by 1.5cm. Technical Data: Material: Brass Color: Matt Black Thread : G1/4" and Inner G1/4" Thread Length : 5 mm Application Length: 15 mm
Dimensions 140x140x25mm, Turns 900rpm, Air flow 85m³ / h, Air pressure 0.58mmH₂O, Volume 14.7dB (A), Connection 3-pin, Voltage range 6-12V, Power consumption 3.6W, Special features vibration damper, BL086
Dimensions 120x120x25mm, Turns 1100rpm, Air flow 65m³ / h, Air pressure 0.82mmH₂O, Volume 15.7dB (A), Connection 3-pin, Voltage range 6-12V, Power consumption 1.44W, Special features vibration damper, BL084
Heatsink type Aluminium Heatsink's width 95 mm Heatsink's depth 95 mm Heatsink's height 70 mm Fan's bearings type FDB Fan's rotation speed 100-2000 rpm Fan noise level 12-30 dB Fan's rotation speed control PWM (Pulse Width Modulation) Durability 50000 hr. Air flow 12-22 CFM Power connector type 4-pin Fan's width 92 mm Fan's depth 92 mm Fan's height 25 mm Processor socket type • LGA1150 • LGA1151 • LGA1155 • LGA1156 Net weight 0,27 kg
be quiet! Pure Wings 2 140mm PWM high-speed. Sobilik: Arvuti korpus, Tüüp: Ventilaator, Ventilaatori läbimõõt: 14 cm. Kaabli pikkus: 0,46 m, Sertifikaat: CE, TÜV, UL. Toiteallikas: 6 W, Pinge: 5 - 12 V, Lubatud voolupinge: 12 V. ...
The aquaero is an absolutely autonomous working microprocessor-controlled device with USB 2.0 interface. All speed parameters and sensor values can be set and visualized in an user-friendly menu or through an even easier to use PC-software. The key features of the aquaero 6 include:· Programmable four channel fan controller· USB 2.0 and aquabus interface· Four fan outputs with up to 30 Watt of power per channel· All fan outputs with 4-Pin plug, switchable between voltage and PWM control· Versatile control options· Eight temperature sensor inputs· Flow sensor input· Three LED outputs· Potential-free switch· Two additional power outputs· Extensive alarm options· Acoustical alarm· Speed signal output for status evaluation· Expandable to a maximum of 12 fan channels For a complete functional description, we recommend downloading the manual: aquaero_5_6_en_2024.pdf Several aqua computer products can be used to expand the functionality of the aquaero 6 controller. These expansions are dynamically mapped into the menus and display pages of the aquaero, creating a consitent control system rather than individual devices. In maximum configuration, the following devices can be connected to an aquaero 6 simultaneously:2x aquastream XT/ULTIMATE pumps8x poweradjust 2/31x aquaero 5/6 LT (in this case only 4x poweradjust 2/3)4x mps based devices (flow sensor, pressure/fill level sensor and D5 pump with aquabus)2x farbwerk controller1x Real Time Clock expansion module Scope of delivery: aquaero 6 LT controller four temperature sensors, length approx. 70 cm one internal USB cable, length approx. 100 cm one connection cable for speed signal or aquabus mounting material for installation into a free extension bay
High-End-AiO-Wasserkühlung von Alphacool, 280-mm-Radiator und zwei 140-mm-PWM-Lüftern, variable Pumpleistung und hochwertiger CPU-Kühler, mit Schnellverschlüssen zur einfachen Aufrüstung, kompatibel zu aktuellen AMD und Intel Sockeln
The None Chamfer PETG Link Tube in transparent by Bitspower is made of polyethylene terephthalate, PETG for short. This material is a plastic and is used, for example, for PET bottles. Its strength lies in its high break resistance, easy heatability and high stability. In order to implement them in the system, it is necessary to bend them into shape with heat and cut them to size. As a rule, the None Chamfer does not need to be reworked when it is cut. The tube measures 100cm in length, 16mm in outer diameter and 12mm in inner diameter. Only the EML series from Bitspower is compatible as connections. Technical Data: Material: PETG Color: Transparent Outer Diameter: 16 mm Inner Diameter: 12 mm Length: 100 cm Compatibility: EML series Bitspower connectors only
