Tootekood: NF-F12 iPPC-3000 PWMGTIN: 4716123315414Jahutid ja lisad
Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, the NF-A14 industrialPPC (Protected Performance Cooling) is a ruggedised high-speed version of the award-winning retail model. Thanks to the outstanding aerodynamic efficiency of the NF-A14 design and the use of a novel three-phase motor, the industrialPPC version provides superior airflow and pressure capacity while keeping noise levels and power consumption moderate as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the NF-A14 industrialPPC suitable for operation in challenging environments, the renowned SSO2 bearing technology guarantees an MTBF of over 150.000hrs. Topped off with Noctua’s trusted reliability and 6 years manufacturer’s warranty, the NF-A14 industrialPPC is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.
The NH-L9x65 is a taller, performance-enhanced version of Noctua’s award-winning NH-L9 low-profile coolers. With 65 instead of 37mm height and four instead of two heatpipes, the NH-L9x65 is more powerful than its smaller siblings yet retains their 95x95mm footprint, which guarantees 100% RAM and PCIe compatibility on Intel based ITX mainboards and makes the cooler more convenient to work with as it doesn’t overhang near-socket connectors. Thanks to the highly optimised NF-A9x14 premium fan that supports fully automatic speed control via PWM, the NH-L9x65 runs remarkably quiet. Topped off with the professional SecuFirm2™ multi-socket mounting system for Intel and AMD, Noctua’s renowned NT-H1 thermal compound and 6 years manufacturer’s warranty, the NH-L9x65 fuses everything users have come to expect from Noctua’s larger coolers into a compact premium package for space restricted systems.Caution: The NH-L9x65 is a highly-compact low-profile quiet cooler designed for use in small form factor cases and HTPC environments. While it provides first rate performance in its class, it is not suitable for overclocking and should be used with care on CPUs with more than 84W TDP (Thermal Design Power). Please consult our TDP guidelines to find out whether the NH-L9x65 is recommended for your CPU.SobilikProtsessorTüüpJahutiVentilaatori läbimõõt9,2 cmToetatud protsessoripesadPistikupesa AM2, Pistikupesa AM2+, Pistikupesa AM3, Socket AM3+, Socket FM1, Socket FM2, Socket FM2+Pöörlemiskiirus (min)600 RPMPöörlemiskiirus (max)2500 RPMMüratase (aeglane kiirus)14,8 dBMüratase (suur kiirus)23,6 dBMinimaalne õhusurve1,06 mmH2OMaksimaalne õhusurve2,11 mmH2OÕhuvool57,5 m³/hKeskmine tõrkeintervall (MTBF)150000 hPinge12Laius95 mmSügavus65 mmKõrgus95 mmKaal413 gVentilaatori mõõdud (laius x sügavus x kõrgus)92 x 14 x 92 mmJahutusradiaatori mõõtmed (laius x sügavus x kõrgus)95 x 51 x 95 mmJahutusradiaatori kaal340 g
The NF-A8 is a highly optimised, premium quality quiet 80mm fan. Featuring Noctua’s AAO (Advanced Acoustic Optimisation) frame as well as sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A8 further improves the renowned quiet cooling performance of the award-winning NF-R8. The PWM version sports Noctua’s custom designed NE-FD1 IC for fully automatic speed control via 4-pin fan headers and comes with a Low-Noise-Adaptor to reduce the maximum speed during PWM control from 2200 to 1750rpm. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for the highest demands.Attachment screwedPower Connection PWM fan connectorFan Bearing SSOPower Input 0 - 0.96 watt(s)Voltage Range 0 - 12 VNumber of Revolutions 450 - 2200 rpmVolume 13.8 - 17.7 dB(A)Volumetric Flow 0 - 55.5 m3/h, 0 - 32.7 cfmDimensionsFans Fan 1 80 x 25 x 80 mmRoHS Compliant Yes
Pure Loop 2 FX 280mm is the impressively high-performing and silent All-in-One water cooling unit with impressive ARGB illumination for slightly overclocked systems. Impressively high cooling performance for all consumer CPUs 2 Light Wings 140mm PWM high-speed fans offer equally high air pressure and vibrant ARGB illumination Doubly decoupled PWM pump for quiet operation and minimal vibration ARGB-PWM-Hub enables synchronization of up to 6 ARGB components and PWM fans Combination of ARGB illumination, all-black design and aluminum-style for unmistakable and stylish look Easy-to-access refill port and included coolant bottle guarantee a long lifespan PURE LOOP 2 FX 280mm Liquid, LGA1150/LGA1151/LGA1155/LGA1200/LGA1700/LGA2011-3/LGA2066/SAM4/SAM5 Fan speed 2200rpm, Fan light Noise level, max 32.8 dB, Dimensions 317 x 140 x 52mm Weight 1.29 kg
Tootekood: FD-FAN-PRI-SL12-GNGTIN: 7340172701231Jahutid ja lisad
Dimensions 120x120x25mm, Turns 1200rpm, Air flow rate 86.02m³ / h, Air pressure 1.27mmH₂O, Volume 19.5dB (A), Fan bearing LLS, Connection 3-pin, Voltage range 6-12V, Power consumption 3W, Special features illuminated in green, FD-FAN-PRI-SL12-GN
The CORSAIR Hydro X Series XR5 140 mm Water Cooling Radiator delivers extreme custom cooling performance, with an 30 mm radiator thickness and premium copper core.
The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The pricing of the new series is also pleasantly affordable. New revision: New cool design More robust materials for even longer lifespan Lowered noise emissions Suitable for continuous operation Noise emissions: The small chillers (like HC150) have a noise emission of 20dB(A) only and can be used near the computer / aquarium without disturbing. Bigger models (like HC500) should be additionally decoupled to reduce the noise level if necessary The models HC1000 und HC 2000 should be extra decoupled or maintained in a seperate room. This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room. We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation. To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware. CPU: 80W (standard) to 150W (overclocked) GPU: 50W (small cards) to 250W (GTX 980) MB: 20 to 40W per component The added values of your system must not exceed the given cooling capability of the chiller. What aquarium size can be cooled with my water chiller? The manufacturer provides the following data: Model / aquarium size in liters: HC-130 / 50-100L HC-150 / 50-200L HC-250 / 100-300L HC-300 / 100-400L HC-500 / 200-800L HC-1000 / 300-1000L HC-2000 / 400-1500L We at Aquatuning wish to advise you that the manufacturer’s data was obtained under optimal circumstances. The temperature response of the aquarium may greatly vary because of insulation, heat from lights respectively sunlight. Hence we recommend using the larger model when reaching the upper limit of the aquarium size values. Notes regarding shipment: For shipping via parcel delivery (GLS) we have manufactured a specially padded carton. For handling and packaging we must charge 15€ incl. VAT. This charge is not charged when the Chiller is picked up or with pallet shipment if the chiller is shipped without the special packaging. Note regarding shipping: This unit can only be shipped via a forwarding company. As the chipping charges differ by distance an online calculation is not possible. Please provide your full telephone number and E-Mail address when ordering, we will contact you after the order is complete. The shipping charge is approximately 50€ within Germany. Technical specifications: Power: 1/6 HP Power consumption: 150W Cooling capacity: 265W (suitable for extreme OC and cooling) Recommended coolant flow: 600-2200 l/h Weight: 18kg Cooling agent: R134A Dimensions: 448x330x440mm (LxWxH) Connector outside diameter: 18-20mm Heat exchanger material: Titanium max. compressive load: 0,8bar Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps current demand: 1.3 A (50 Hz) current drain: 299 W Scope of Delivery: 1x Waterchiller Hailea Ultra Titan 300 2x 45° angle with rubber seal 2x rubber seal with G1/4" internal thread 2x suitable hose clamps Note for first-time users: If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product! Note for aquarium-use: The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least on power-lever higher that theoretically calculated This product has been reviewed for you (by): Overclockingstation Zockon bit-tech (engl.)
The plug in white from Bitspower, can be screwed into a G1/4" internal thread for a certain time or permanently, e.g. to close radiators or equalizing tanks. Technical Data: Material: Brass Colour: White Thread: G1/4" Thread Length: 5 mm
DEMCiflex Dust Filter 140mm Round Black/White DF0495Toote kirjeldus inglise keeles:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution, which in this case is suitable for 140 mm fans. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Finally, a few notes on the installation: First, the question arises, which fans have to be covered at all. As already mentioned, this applies exclusively to the sucking fans. But which are they? The safest way to recognize this is on the fan itself, with two arrows on the outside or inside of the fan frame. If one of the two arrows points towards the interior or if the rotor suspension is aligned with the interior, this is an aspirating fan. These are usually located on the front, side and bottom, whereas the rear and cover fans usually carry the air out of the housing and therefore need not be filtered. In order to maximize the filter effect, an overpressure in the housing can be generated. This means that more volume of air is forced into the housing than is being sucked out of the housing by other fans at the same time. This prevents air (and with it the dust) from entering the interior through other openings that may not have been filtered. If all fans are the same size, you should blow more fans into the housing than pull out. In this case, the power supply is to be counted as an additional, extracting fan, as long as it does not receive its supply (fan side) directly from the outside (occurs at floor mounting). If different fans with different sizes and speeds are used, the respective air volumes (m³ / h) in the data sheets give a good reference value, whereby in turn the total volume of the suction fans must be higher than that of the blowing out fans. Note: The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate. Technical details:Size (frame): Ø approx. 152 mmSize (filter): Ø approx. 127 mmCompatibility: 140 mm fan slotMaterial (filter): polyester meshColor: black (frame), white (filter)Mounting: magnetic bracket + mounting frameAdvantages: Fast installation No compatibility restriction Easy and quick cleaning Effective filter effect with high air permeability Durable fabric
The Phorcys Evo water cooling set from Raijintek offers everything you need for CPU water cooling. The Phorcys Evo is ideal as an entry point or as the foundation stone for a water cooling system. Due to its modular design, it can also be easily expanded and due to the high-quality components it is also something from which the user benefits for a long time. The CWB-RGB cooler can handle even a hot CPU without any problems, while the Calore C240D Radiator, with its two 120mm iris fans, effectively cools down the water temperatures. The fans have addressable RGB LEDs. The flow is provided by the stylish D5 RBW pump with equalizing tank. The pump also has addressable RGB LED lighting. The components are connected to the Raitubo-Hard Tubes and the fittings. Raijintek has also thought of an individual design for the set. Two Raiaqua bottles are included, the crystal-clear liquid of which can be adjusted as required using the colouring agents supplied. Since the pump, the CPU cooler and the fans have RGB LED lighting, they can be synchronized and controlled with the included controller. Up to 16.8 million colours and many effects are available. Technical Data: Radiator: Dimensions: 282.5 x 119 x 65.5 mm (W x D x H) Material: Copper Color: Black Weight: 1191 g Pump/Tank: Dimensions (Total): 87,4 x 280,6 x 91,2 mm (W x H x D) Dimensions (Tank): 64 x 205 mm (Ø x H) Material: POM + PMMA, Steel, Plastic Color: Black (pump), Transparent (expansion tank) Throughput: 900 L/h Pressure: max. 50 PSI Volume: max. 30 dB(A) Revolutions: 1.800, 2.500, 3.200, 3.900, 4.500 rpm Voltage: 12 V Current: 1,8 A Lighting: Addressable RGB Life: 50.000 h Weight: 790 g Fan: Dimensions: 120 x 25 x 120 mm (W x H x D) Colour: Black / Transparent (frame) / RGB (LEDs) Bearing Type: Plain Bearing Speed: 1.800 rpm Delivery Volume: max. 71.65 m³/h Static Pressure: max. 1.7 mm H2O Volume: max. 26.5 dB(A) Voltage: 12 V Starting voltage: 6 V Connection: 4-Pin PWM Life expectancy: 40.000 hours Scope of delivery: 1x CWB-RGB CPU cooler, 1x Antila D5 RBW pump/reservoir, 1x Calore C240D Dual Radiator (240 mm), 2x Iris 12 RBW ADD 120 mm fan, 4x Raitubo-H14 Hard-Tubes, 14/10 mm - transparent, 6x G1/4" to 14/10 mm outer/inner diameter (OD/ID) Hard-Tube connectors, 90° angle - black, 6x G1/4 in. to 14/10 mm OD/ID Hard Tube Connections, straight - black, 2x Raiaqua-T1 coolant, 500 ml each, 6x colorant (2x blue, green, red), 1x 8-port RGB controller for addressable LEDs incl. remote control, 1x thermal compound, Mounting material for radiator, fan, AMD and Intel socket Compatibility: Intel socket: LGA 775, 115x, 1366, 201x, 2066, AMD socket: AM2(+), AM3(+), AM4, FM1, FM2(+)
Adapter for mounting an expansion tank from the HEATKILLER® Tube series to mounting holes for fans in 140x140mm format. This allows the expansion tank to be attached to a radiator from the HTF4 series, for example. Please note that the basic bracket of the HEATKILLER® Tube series is also required. This is available separately. Technical data: Dimensions (LxWxH): 140 x 15 x 10 mm Material: POM (ACETAL) Color: Black Scope of delivery: 1x HEATKILLER® Tube - 140mm Fan Adapter (pair) Mounting material
The Barrow mini Water Stop Valve is made of full metal. Its construction makes it extremely robust. The housing is made of copper and the handle is made of aluminum. The stopcock has a G1 / 4 “internal thread with a length of approx. 5mm on both sides. Technical specifications: Color: white housing / black handle Material: copper / aluminum handle Thread: 2x G1 / 4 " Thread length: 5mm Dimensions: 37.2 x 35.5 x 23mm Flow opening: 10mm Scope of delivery: Barrow mini water stop valve
- True Hi-Flow Design.- Hi-Quality Brass Material.- High Durability Nickel Finished In Black Sparkle Color.- Hiding O-Ring Design.- Design For Tube ID 1/2" With Stop Fitting.- RoHS Compliant.Toote värvMustMaterjalMessing
The nickel-plated adapter in the color shiny black couples two tubes, which do not run on a common straight line and provides at the adapter for a bend of 60 degrees. Two rubber rings seal both sides. The adapter is especially well compatible with the Crystal Link Tubes from Bitspower. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Black Angle: 60 ° Connections: 2x Ø 12 mm
Toote kirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a black glossy nickel plated, straight adapter with two G1 / 4-inch external threads. The special feature: The length of the adapter can be flexibly adjusted between 41 and 69 mm (measured without thread). For this purpose, only one nut is loosened, one side pulled out as desired and then fixed again with the union nut. Technical details:Material: brass, black nickel platedConnections: male thread: 2x G1 / 4 inchLength: 41 - 69 mm (variable)
The adapter in carbon black from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Carbon Black Connection: 12 mm (OD) Thread: G1/4" Thread Length: 5 mm
The adapter for 16mm (AD) Hard Tubes in matt black from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Connection: 16 mm (OD) Thread: G1/4" Thread Length: 5 mm
