Thermaltake's Pure A12 is a PWM controlled LED fan that comes in four different colours: blue, green, red and white. Especially radiators benefit from the very quiet operation and low heat generation thanks to the self-lubricating hydraulic bearing. The anti-vibration pads also ensure low noise levels. As the sealing cap prevents the lubricant from escaping, a long service life is also guaranteed. The nine LEDs of the fan impress with a uniform brightness and high colour intensity and give the PC system the final touch. Technical Data: LED colour: White Dimenson: 120 x 120 x 25 mm Interface: 4-Pin PWM Fan Stated Voltage: 9.0 V Fan Rated Voltage: 12 V Rated current: 0.15 A Power Input: 1.8 W Fan Speed: 500 - 1500 rpm Max. Air Pressure: 1.59 mm-H2O Max Air Flow: 56.45 CFM Noise: 25.8 dB-A Bearing Type: Hydraulic Bearing Life Expectation: 40,000 hrs, 25℃ Weight: 156 g
Leistungsstarker CPU-Kühler von Jonsbo, integrierte RGB-Beleuchtung, ein 120-mm-PWM-Lüfter mit RGB-LEDs, TDP von 130 Watt, hohe Kompatibilität zu Intel- und AMD-Sockeln
Tüüp: Torn jahuti Mõõtmed koos ventilaatoriga (WxHxD): 251x164x104mm Ventilaatoreid: 4x 120x120x25mm, 32.2dB(A) Kaal koos ventilaatoritega: 2 kg Ühendus: 4-Pin PWM Ühilduvus: 1150/1151/1155/1156/1200, 1356/1366, 2011-0/2011-1/2011-3/2066, AM4, TR4/sTRX4/sWRX8/SP3
Profi-CPU-Wasserkühler von EKWB, Kühlerboden aus vernickeltem Kupfer, Deckel aus schwarzem Acetal, speziell für AMD AM4-Sockel, hochwertige Verarbeitung und edles Design, modulare Konstruktion mit austauschbaren Komponenten, integrierte D-RGB-Beleuchtung
OPTIMISED FOR STATIC PRESSURE During the development of the new BioniX P120, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the BioniX P120 is particularly suitable for use on heatsinks and radiators. STRONG COOLING PERFORMANCE Numerous improvements, such as an updated engine technology and a newly developed fan design, have noticeably increased the performance of P-fans. MORE EFFICIENT TECHNOLOGY The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new BioniX P120 to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance. MAXIMUM QUIETNESS, MINIMUM VIBRATION Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. EXTENDED LIFE SPAN A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years. 200 TO 2100 RPM REGULATED VIA PWM PST With a wide range of regulation and the PWM Sharing Technology (PST), the BioniX P120 fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed. HIGH QUALITY BEARING Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Technical Data Performance Fan Speed: 200 - 2100 rpm Airflow: 67.56 CFM/ 114.9 m³/h Static Pressure: 2.75 mm H₂O Noise Level: 0.45 Sone Operating Ambient Temperature: 0 - 40 °C Fan Fan Frame: BioniX Control Type: PWM PST Connector: 4-Pin-Connector + 4-Pin-Socket Fan Bearing: Fluid Dynamic Bearing Electric Characteristics Typical Voltage: 12 V DC Starting Voltage: 4.3 V Current/ Voltage: 0.13 A / 12 V Cable Lenght: 400 mm Size & Weight Lenght: 120 mm Width: 120 mm Height: 27 mm Weight: 140 g
Can the Eisbaer from Alphacool become even better? Absolutely! Would the Eisbaer look even more impressive with aRGB? Definitely yes!! The Eisbaer Aurora AIO still cools the CPU with the well-known and high-quality copper cooler of the Eisbaer, although the surface area has been enlarged, compared to its predecessor. Also, the pump works much more efficiently with 10% more power, with reduced noise level. The hoses and fittings have also been completely revised and are now much smoother and more inconspicuous. Since durable TPV hose and fittings from the Enterprise Solution series are now used, safety and durability is also one of the features. For more individuality, fittings and hose can be easily replaced thanks to the G1/4 fittings. The Eisbaer Aurora, as before, can be expanded via the quick release fasteners. Also refilling is still possible. The most striking feature of the Eisbaer Aurora is the addressable RGB LED lighting. Here the focus is on the Eisbaer pump and the stylish Aurora LUX Pro fans. By using a compatible mainboard or controller, colour and effects can be adjusted individually. Technical Data: Radiator Dimension: 313,5 x 144 x 30 mm (L x W x H) Material: Full Copper Threads: 2x G1/4" Tubes Dimensions: 12,7 / 7,6 mm Material: Thermoplastic vulcanisates, EPDM/PP Colour: Matt black Operating temperature: -50 to +155°C Hardness: 35 Shore-A to 50 Shore-D Length: 40 cm Pump Housing Dimension: 66 x 66 x 69 mm (L x W x H) Material Reservoir: Transparent Nylon Threads: 2x G1/4" Connection Digital RGB: 3-Pin JST + 3-Pin 5V Quantity Digital aRGB LED: 10 Pump Speed: 2600 rpm Voltage: 7 - 13,5V DC Power Consumption: 4W Max. Flow Rate: 75 L/h Max. Head: 0,95 m Fans Size: 140 x 140 x 25 mm Speed: 600 - 1500 rpm Static Pressure: 0,41 - 1,6 mm H2O Air Flow Rate: 27 - 71 m³/h Bearings: Hydraulic Fan Connector: 4-Pin PWM Connection Digital RGB: 3-Pin JST + 3-Pin 5V Compatiblity Intel 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / TR4 / sTRX4
L x W x H: 394,5 x 124 x 30 mm Material: cooling fins & channels, prechamber copper outer housing steel Fins per Inch: 15 Threads: 5x G1/4“ Fan size :120 mm Fan slots: 3 one-sided / 6 double-sided Pressure tested: 1,5 Bar Max working temperature: 180 °C
The Barrow Water discharge external plane support 120mm is an adapter for mounting an AGB or pump on a 120mm fan space. The support is made of metal and coated with powder. Technical Data: Material: Powder coated metal Colour: Black Mounting: 120mm fan slot Dimensions: 120 x 120 x 1,5 mm Scope of delivery: Barrow Water discharge external plane support 120mm
The Barrow Water discharge external plane support 140mm is an adapter for mounting an AGB or pump on a 140mm fan space. The support is made from metal and powder coated. Technical Data: Material: Powder coated metal Colour: Black Mounting: 140mm fan space Dimensions: 140 x 140 x 1,5 mm Scope of Delivery: Barrow Water discharge external plane support 140mm
The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H 2 O and offers a max. air flow of 119.8m³/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 277 x 152 x 46 mm Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow rate 75 L/h Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H 2 O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Compatibility list: - ASUS TUF Gaming Radeon RX 6900 XT OC, 16GB - ASUS ROG Strix Radeon RX 6800 XT OC, 16GB GDDR6, HDMI, 3x DP - ASUS ROG Strix Radeon RX 6800 OC, 16GB GDDR6, HDMI, 3x DP - ASUS TUF Gaming Radeon RX 6800 XT OC, 16GB GDDR6, HDMI, 3x DP - ASUS TUF Gaming Radeon RX 6800 OC, 16GB GDDR6, HDMI, 3x DP Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.
The Bykski silver fittings are made of brass and are designed for 16/10mm Soft Tubes. Technical Data: Material: Brass Color: Silver Thread: G1/4 Zoll Thread Length: 5 mm Tubing Size: 16/10 mm (ID 3/8", OD 5/8")
The fitting in black by Bykski, is made of brass and has a 90° angle. The fitting fits 14mm Hard Tubes and allows 90 degree bends in the water cooling system without having to deform the tube itself. Technical Data: Material: Brass Colour: Black Angle: 90° Connection: 2x Ø 14 mm Compatible Tube: 14 mm OD (PETG, Acrylic, Metal)
With the 5v Addressable RGB (RBW) adapter cable from Bykski, a 5V A-RGB LED header can be connected directly to a compatible mainboard. Technical Data Voltage: 5V only LED Type: 5V RBW Scope of Delivery 1x Adapter Cable
The 90 ° angle adapter from Bykski is made of brass and has two G1 / 4 “internal threads. Technical specifications: Dimensions: 23.7 x 23.7 x 18.68 mm Material: brass Color: Black Angle: 90 ° Thread: 2x G1 / 4 “internal thread
The 90 ° angle adapter from Bykski is made of brass and has two G1 / 4 “internal threads. Technical specifications: Dimensions: 23.7 x 23.7 x 18.68 mm Material: brass Colour: gold Angle: 90 ° Thread: 2x G1 / 4 “internal thread
The Alphacool ES 1U ServerRack has been specifically optimised to accommodate water cooling sets that can dissipate up to 490W of waste heat in this enclosure. For this purpose, the enclosure not only offers a mounting frame for a maximum of one 7x40mm full copper radiator of the Alphacool NexXxoS series. The optionally available Alphacool ES 40 mm fans with PWM control ensure optimum cooling performance. Drives The 1U server rack offers mounting options for two 5.25" drives on the left and right side of the front. Each 5.25" bay offers the alternative of mounting two 3.5" drives. A holding frame for mounting up to four 2.5" drives is pre-mounted in the centre front. This holding frame can be mounted at five other positions in the enclosure. Mainboard For mounting an SSI-EBB mainboard, all the usual screw connection options in the classic ATX format are available. This includes all mounting holes for Mini-ITX to EE-ATX. A graphics card in PCIe or 0.8" low-profile format can also be installed via a riser cable. A corresponding panel for 0.8" cards is pre-mounted in the case. Water cooling for 490W waste heat With an appropriate water cooling system, up to 490W of waste heat can be dissipated in this case. Alphacool offers special water cooling sets for this purpose, which can be individually configured and are delivered to the customer pre-filled. The mounting frame for the radiator and fans can be moved within the enclosure to suit any set-up. Please note: The case comes without I/O panel. Alphacool offers a separate set of I/O panel and cable set under item number 1021066. Overview of all compatible sets for this enclosure can be found here! (Attention: This link redirects you to the manufacturer's website www.alphacool.com) Alphacool recommends the following compatible products for this case. Radiators 1015753 - NexXxoS UT60 Full Copper X-Flow 40mm Dual (2 x 40mm) 1015717 - NexXxoS UT60 Full Copper X-Flow 40mm Triple (3 x 40mm) 1015718 - NexXxoS UT60 Full Copper X-Flow 40mm Quad (4 x 40mm) 1015719 - NexXxoS UT60 Full Copper X-Flow 40mm Penta (5 x 40mm) 1015720 - NexXxoS UT60 Full Copper X-Flow 40mm Hexa (6 x 40mm) 1015721 - NexXxoS UT60 Full Copper X-Flow 40mm Hepta (7 x 40mm) Reservoir with integrated pump top 1016193 - Alphacool Eisstation 40 DC-LT (Empfohlene Pumpe: 49061 ) 1017717 - Alphacool ES Reservoir 1U – DDC (Empfohlene Pumpe: 1019539 ) CPU Cooler 1016218 - Alphacool XPX 1U (AMD AM4, Intel LGA 1150, 1151, 1200, 2033, 2033-1, 2066) 1015815 - Alphacool XPX Pro 1U (AMD TR4, sTRX4, SP3, sWRX8, Intel LGA 2011, 2011,3, 2066, 3647) Fans 1020163 - Alphacool ES 40mm 400-15.000rpm PWM (40x40x28mm) 1020160 - Alphacool ES 40mm 400-10.000rpm PWM (40x40x20mm) Techncal data: Form factor 1HE (2U) Length 730,75 mm (28,77 Inch) Width 478,50 mm (18,84 Inch) Height 44,45 mm (1,75 Inch) Weight 7,62 kg (16,80 lbs) Material Galvanised sheet steel Materialdicke 1,2 mm Colour Case Grey Colour Front Black Standard Optional 2 x 5,25“ Slots Per Slot 1 x 3,5“ 4 x 2.5“ HDD/SSD Download Manual PDF: Alphacool ES 1U - 19" Serverrack Download Datasheet PDF: Alphacool ES 1U - 19" Serverrack
The RGB fan from Bykski, rotates up to 1500rpm, at a pleasant volume. The corners are fitted with dampers to reduce annoying vibrations. In addition, the fan is also equipped with RGB lighting to make your case shine! Technical Data: Dimensions: 120 x 120 x 26 mm Speeds: 1500 rpm Volume: 33,6 dbA Air volume: 64,8CFM LED: 12V
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®. (Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316 , Dremel® - Art.No: 32196 and 32229 ) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 90° 10/30cm WARNING: Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention: This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
The Barrow LRC2.0 full coverage GPU Water Block for Colorful BATTLEAX 3090 Aurora is a complete GPU cooler. It covers and cools all important components such as GPU RAM, capacitors and GPU processor. This cooler was specially developed for the Nvidia Colorful BATTLEAX 3090. The cooler plate is made of nickel-plated copper and is equipped with special micro cooling channels for optimal cooling. The lid with the integrated RGB lighting is made of acrylic glass. The RGB's are controlled via a 4Pin connector on the mainboard. Compatibility Colorful BATTLEAX RTX 3090 24G Colorful BATTLEAX RTX 3080 10G Technical Data Material: Nickel-Plated Copper (base) / Acrylic (cover) Dimensions: 250 x 122,3 x 20,4mm Colour: Silver / Transparent Cover: complete GPU cooler Threads: 2x G1/4" female Lighting: integrated RGB lighting Connections: 4Pin 5V RGB lighting Scope of Delivery Barrow LRC2.0 full coverage GPU Water Block for Colorful BATTLEAX 3090 Aurora
The Barrow LRC2.0 full coverage GPU Water Block for Colorful Vulcan 3090 Aurora is a complete GPU cooler. It covers and cools all important components such as GPU RAM, capacitors and GPU processor. This cooler was specially developed for the Nvidia Colorful Vulcan 3090. The cooler plate is made of nickel-plated copper and is equipped with special micro cooling channels for optimal cooling. The lid with the integrated RGB lighting is made of acrylic glass. The RGB's are controlled via a 4Pin connector on the mainboard. Compatibility Colorful iGame RTX 3080 Vulcan X OC 10G Colorful iGame RTX 3080 Vulcan OC 10G Colorful iGame RTX 3080 Vulcan 10G Colorful iGame RTX 3080 Neptune OC 10G Colorful iGame RTX 3080 Neptune 10G Technical Data Material: Nickel-Plated Copper (base), Acrylic Glass (cover) Dimensions: 296,2 x 145,5 x 20,4mm Colour: Silver / Transparent Cover: complete GPU cooler Lighting: integrated RGB lighting Threads: 2x G1/4" internal thread Connections: 4Pin 5V RGB lighting Scope of Delivery Barrow LRC2.0 full coverage GPU Water Block for Colorful Vulcan 3090 Aurora
The Barrow LRC2.0 full coverage GPU Water Block for Colorful 3090 Advanced OC Aurora is a complete GPU cooler. It covers and cools all important components such as GPU RAM, capacitors and GPU processor. This cooler was specially developed for the Nvidia Colorful 3090 Advanced. The cooler plate is made of nickel-plated copper and is equipped with special micro cooling channels for optimal cooling. The lid with the integrated RGB lighting is made of acrylic glass. The RGB's are controlled via a 4pin connector on the mainboard. Compatibility Colorful iGame RTX 3090 Advanced OC Colorful iGame RTX 3090 Advanced Colorful iGame RTX 3080 Advanced OC 10G Colorful iGame RTX 3080 Advanced 10G Colorful iGame RTX 3080 Ultra OC 10G Colorful iGame RTX 3080 Ultra 10G Technical Data Material: Nickel-Plated Copper (base), Acrylic Glass (cover) Dimensions: 278,7 x 122,3 x 23,9mm Colour: Silver / Transparent Cover: complete GPU cooler Lighting: integrated RGB lighting Threads: 2x G1/4" female Connections: 4Pin 5V RGB lighting Scope of Delivery Barrow LRC2.0 full coverage GPU Water Block for Colorful 3090 Advanced OC Aurora.
Now finally also with us the Black ICE Nemesis radiators Black Ice® Nemesis® GTX Micro Radiators feature the innovative GTX® dual-core design and offer even higher performance with less airflow or noise. With the standard G1/4" threads, you can use all common connections of your water cooling system. Technical details: 80mm Radiator 109 x 84 x 54 mm (L x B x H) 16 FPI 25 micron copper fins Now optimized for ultra-stealth fans with 800 rpm. Supercruise optimizations for scalable performance with higher speed fans Increased flow rate Standard G 1/4″ Input/output connections Standard M4 mounting thread
Now finally also with us the Black ICE Nemesis radiators Black Ice® Nemesis® GTX Micro Radiators feature the innovative GTX® dual-core design and offer even higher performance with less airflow or noise. With the standard G1/4" threads, you can use all common connections of your water cooling system. Technical details: 92mm x 2 Fan Radiator 213 x 84 x 54 mm (L x B x H) 16 FPI 25 micron copper fins Now optimized for ultra-stealth fans with 800 rpm. Supercruise optimizations for scalable performance with higher speed fans Increased flow rate Standard G 1/4″ Input/output connections Standard M4 mounting thread
The CPU-XPR-CD-BK from Bykski is a high-performance CPU water cooler that can be used on Intel 115x and 20xx sockets. The base of the CPU cooler is a nickel-plated copper base and thanks to the related construction, an excellent cooling performance of the CPU cooler is ensured. On the top of the CPU cooler there are G1/4 inch threads for the connections. The lid is made of black aluminium and acrylic, which shows off well on the side. In addition, the aRGB lighting rounds off the cooler. Technical Data: Colour: Black Material Cover: PMMA and Aluminium Material Base: Copper (nickel-plated) Connections: 2x G1/4" LED: aRGB (3-Pin 5V) Compatibility: Intel: 115x, 20xx
The CPU FIRE-ON-I from Bykski is a high-performance CPU water cooler that can be used on Intel sockets 11xx, 1366 and 20xx. The base of the CPU cooler is a copper base and thanks to the related construction, an excellent cooling performance of the CPU cooler is ensured. On the top of the CPU cooler there are G1/4 inch threads for the connections. The lid is made of black aluminium and acrylic, which allows a view into the interior. In addition, the aRGB lighting rounds off the cooler. Technical Data: Colour: Black Material Cover: PMMA and Aluminium Material Base: Copper Connections: 2x G1/4" LED: aRGB (3-Pin 5V) Compatibility: Intel: 1151 / 1150 / 1155 / 1156 / 1366 / 2011 / 2066
The CPU-XPR-CD-AM from Bykski is a high-performance CPU water cooler that can be used on AMD Ryzen and Threadripper sockets. The base of the CPU cooler is a nickel-plated copper base and thanks to the related construction, an excellent cooling performance of the CPU cooler is ensured. On the top of the CPU cooler there are G1/4 inch threads for the connections. The lid is made of black aluminium and acrylic, which shows off well on the side. In addition, the aRGB lighting rounds off the cooler. Technical Data: Colour: Black Material Cover: PMMA and Aluminium Material Base: Copper (nickel-plated) Connections: 2x G1/4" LED: aRGB (3-Pin 5V) Compatibility: AMD: AM2 / AM2+ / AM3 / AM3+ / AM4 / FM1 / FM2 / ThreadRipper (Ryzen 3, 5 and 7) Scope of Delivery Bykski CPU-XPR-CD AMD CPU cooling block Bykski CPU Mounting Kit Bykski CPU Backplate Bykski CPU assembly instructions
The EK-Quantum Momentum Aorus Z490 Master D-RGB is the new Quantum Line monoblock designed specifically for the Gigabyte Aorus Z490 master motherboard. The monoblock is simple and elegant due to its black acetal. Based on the EK Momentum series, the CPU cooler has been further optimised in terms of performance and optimal coolant flow. The cooling plate is made of nickel-plated copper and impresses with its dense micro-rib structure. Thanks to the pre-installed nickel-plated brass screw-in spacers, installation is made easy. The supplied thermal pad is used on voltage regulator modules to improve stability and performance and extend the life of the motherboard. Enclosed: EK-Quantum Momentum Aorus Z490 Master D-RGB Monoblock Mounting mechanism Thermal grease EK-TIM Ectotherm Thermal pads
The EK-Quantum Momentum Aorus Z490 Master D-RGB is the new Quantum Line monoblock designed specifically for the Gigabyte Aorus Z490 master motherboard. The top side of the monoblock is made of acrylic glass and the integrated addressable D-RGB lighting sets the block perfectly in scene. Based on the EK Momentum series, the CPU cooler has been further optimised in terms of performance and optimum coolant flow. The cooling plate is made of nickel-plated copper and impresses with its dense micro-rib structure. Thanks to the pre-installed nickel-plated brass screw-in spacers, installation is made easy. The supplied thermal pad is used on voltage regulator modules to improve stability and performance and extend the life of the motherboard. The block is equipped with a 3-pin 5V addressable D-RGB LED strip compatible with the 3-pin 5V D_LED (addressable LED strip) headers of the Aorus Z490 Master. This product is also compatible with D-RGB controllers that support the pin assignment: +5V, D, Blocked, Ground. The arrow marking on the 3-pin LED connector must be aligned with the +5V marking on the D_LED (addressable LED strips). Technical Data D-RGB-Anschluss 3-polige 5V-Digital-LED-Stiftleiste (Pinbelegung: +5V, D, blockiert, Masse) Enclosed: EK-Quantum Momentum Aorus Z490 Master D-RGB Monoblock Mounting mechanism Thermal grease EK-TIM Ectotherm Thermal pads
The Ethereal Single 2.0 bracket from Singularity fixes expansion tanks with a diameter of 60mm to radiators or fans with a width of 120 or 140mm. The bracket is space-saving and also very stable thanks to the black anodised aluminium and the steel fastening elements. T echnical Data Material: aluminium, steel Colour: black Compatibility: reservoirs with 60 mm Ø Scope of delivery: 1x Rear retaining clip 1x Front retaining clip 1x Universal 120/140mm mounting plate 2x M4 hexagon countersunk screw (10 mm) 2x M4 hexagon countersunk screw (8 mm)
Mayhems Pre-Mix is a new and excellent way to give the last colouring touches to your watercooling system! Strong colours, UV-reactive or not, extreme choice of colours, extremely effective: Especially the long-term experience gained by this company with their concentrates is projected to their ready-to-use coolants. Even mixing of the different colours is possible to make your very own creation! Make your individual colour concept with the products from Mayhems. Features: High-quality concentrated pigments make for intense and strong colours Exceptional performance Safe to use with plastics, metals, rubber and all kinds of gaskets Packed in a special bottle for easy filling Unlimited possibilities with mixing of different tones How to use: Simply pour into the cooling system, and you are set with optimal protection and intense colours! As a protective additive Mayhems Biocide is used. Warning: Following manufacturers will refuse the warranty for your products if they are beeing operated with the fluids of Mayhems: Alphacool, Koolance, Phobya and Aqua Computer. Technical specifications: Colour: transparent/blue, UV-reactive Content: 1000ml Extent of delivery: 1x Mayhems Pre-Mix X1 UV Clear Blue 1000ml This product has been reviewed for you: Overclockingstation Overclockingstation
Phobya Y-Kabel für PWM Splitter 4Pin PWM auf 4Pin PWM & 4Pin Molex. Da sich das Steuern und Schalten über das Mainboard von PWM Lüfter wesentlich kostengünstige Gestaltet als über eine Lüftersteuerung, bietet sich dieses Kabel geradezu an. Um die geringe Anzahl an Mainboardsteckplätzen für diese Art von Lüftern noch zu erhöhen kann dieses Kabel verwendet werden. Alternativ kann auch der 4 Pin Molex zur Stormversorgung der beiden PWM Lüfter genutzt werden. Der Adapter wird in einem schlichten Schwarz geliefert. Die Kabel sind mit einer passenden Ummantelung aus Flexsleeves abgeschirmt. Es bietet zusätzlichen Schutz vor Abrieb. Dieses Erhöht die Lebensdauer der Kabel erheblich. Die enden zu den Anschlüssen hin wurden mit Schrumpfschläuchen versehen, so das ein sauberer Übergang geschaffen wurde. Sleeving: Dieses Kabel ist nicht nur zweckmäßig, sondern auch noch optisch sehr ansprechend. Das umspannende Netz, was die eigentlichen Kabel umwickelt, ist sehr dicht und bietet genau den Effekt den die Profisleever wollen: Kompletter Umbau der Kabel, um die Einzigartigkeit seines Systems noch besser zu betonen! Besonderes Augenmerk wurde auf die Kombination von der Kabelummantelung (dem Sleeve), des Steckers und der Schrumpfschläuche gelegt, dass sie ein einheitliches Bild ergeben. Sets: Phobyas Ziel ist es, den Hobby und Profi Casemoddern hier ein Stück weit entgegen zu kommen. Sleeving ist viel Arbeit und kostet viel Zeit, daher kann man sich nun mit den Kabeln von Phobya sein komplettes System so umbauen wie man es gerne möchte, nur durch einfaches Kabelwechseln. Technische Details: Anschlüsse: 2x 4 PIN PWM female Anschluss 1x 4Pin Molex Anschluss Farbe: schwarze Sleeve, schwarze Stecker, schwarzer Schrumpfschlauch Abmessungen: komplett 50cm RoHS konform Lieferumfang: 1x Phobya Y-Kabel für PWM Splitter 4Pin PWM auf 4Pin PWM & 4Pin Molex 50cm - Schwarz
Slot cover for simple connection of pumps/fans etc. Inside is a 4-pin molex connector which runs outward and connects to an additional 3x 4-pin PWM fan connection. This is especially useful if you need to externally power your pumps, fans, etc. This slot cover facilitates a neat transition from the case interior to exterior areas. Technical Details Material: metal/plastic Colour: silver/black Connections Power input (interior): 1x 4-pin molex Power output (exterior): 1x 4-pin molex & 3x 4-pin PWM plug Scope of Delivery 1x Phobya PCI slot cover 4-pin molex & 3x 4-pin PWM fan plug Note Correct function only guaranteed with supplied cable
Standardschlauch für fast alle Anwendungen. Erhältlich in verschiedenen Abmessungen. Schön durchsichtig und flexibel, daher kann der Schlauch einfach verlegt werden. Geeignet für UV aktive oder farbige Wasserzusätze. Wir empfehlen die 11/8 mm Anschraubtüllen zu verwenden. Innendurchmesser 8mm Außendurchmesser 11mm Preis pro 1 Meter Nicht geeignet für Steckanschlüsse (Push-In oder P&C) sondern nur für Tüllen mit Übermutter oder Schlauchanschlüsse (z.B. mit Schlauchschelle) Dieses Produkt wurde für Sie getestet: Hardwareluxx (User review "bundymania") Achtung: Der Schlauch kann stellenweise einen schwarzen Schriftzug aufweisen. B itte beachten: Transport und lagerbedingt kann es sein, dass der Schlauch etwas "unterkühlt" beim Kunden ankommt. Kalter PVC-Schlauch neigt dazu etwas hart zu werden. Um eine optimale Verlegung zu ermöglichen empfehlen wir daher den Schlauch nach Erhalt vor dem Verlegen entweder für ein paar Stunden in einem warmen Raum zu lagern oder kurz in heißes (z.B. 60°) Wasser zu legen. Dann hat der Schlauch seine optimale Biegefreundlichkeit erreicht.
Beschreibung Der Schlauch aus dem Hause Tygon wird in der Wasserkühlungsszene gern als Königsklasse bezeichnet. Natürlich hat Qualität auch ihren Preis! Tygonschlauch wurde entwickelt um in Laboren oder auch Krankenhäusern seine Arbeit zu verrichten. Durch diese Funktion erhöht er auch selbst das eigene Produkt-Leben. Im Inneren des Schlauches besitzt er eine Fläche die dazu führt dass Mikroben abgetötet werden und somit ein sauberer Flüssigkeitsdurchfluss ermöglicht wird. Außerdem ist dieser Schlauch absolut UV resistent. Daneben handelt es sich hierbei um einen hochflexiblen Schlauch, der sehr gutes Knick- und Verlegeverhalten aufweist. Wir empfehlen daher nur die Verwendung von Schraub-Anschlüssen! Achtung: Wir versuchen nach Möglichkeit die Schläuche am Stück auszuliefern. Sollte dies nicht möglich sein so erhalten Sie den Schlauch in maximal 2 Teilstücken, wobei wir dann ca. 10cm mehr Schlauch Ihnen kostenlos beipacken. Reseller werden gebeten in VP-Einheiten zu bestellen. Die VP-Einheit beträgt: 15m = 1 Karton.
The Protium expansion tank from Singularity Computers is a 150mm tube with a diameter of 60mm. Together with the attachments made of acetal and acrylic, the expansion tank reaches a height of 189mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 x 60 x 189 mm (L x W x H) Diameter: 60 mm Material: Acetal (lid, base), Acrylic (lid, base, reservoir), Aluminium (retention rings) Color: Black, Silver, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 150 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
