Alphacool is an internationally renowned company in the field of water cooling solutions for both industrial and home users. To ensure that customers receive the best products available, Alphacool is constantly developing new products and making improvements to existing products.Make No Compromises, Use Copper. As usual, Alphacool uses pure copper for the NexXxoS ST25 slim radiators. The end chambers, the water channels and the cooling fins are all made of copper, a unique selling point worldwide. No other manufacturer relies on pure copper for all these components combined. As a result, Alphacool has been producing one of the most popular and highest performing radiators on the market for many years, providing the perfect foundation for every water cooling system.Full Cooling CapacityTo maximize the performance of a radiator, Alphacool reaches deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/(mK) for copper compared to 236 W/(mK) for aluminium, the winner is clear. Alongside this is the special fin density. Alphacool is one of the oldest companies in the field of water cooling and has carried out countless laboratory tests. The result is a fin spacing of 15 FPI. This means that the air flow is only slightly obstructed as the air can pass through even without high pressure. However, the cooling capacity does not suffer from this, on the contrary. To use the airflow optimally, all cooling fins have small serrations. These are tiny flaps that guide the airflow in the desired direction and increase the surface area. In the case of radiators, they are barely 1 mm high, but still provide controlled air turbulence to increase cooling capacity and minimise airflow noise.CompactThe ST25 slim radiators offer the ideal liquid cooling solution for Mini-PCs or SSF (Small Form Factor) systems. Due to the extremely flat design, the NexXxoS ST25 radiators are ideal for such small cases and due to the reduced size, they give you the extra space you need to work in the case. Technical data:LxWxH: 393 x 120 x 25,5 mmMaterial: copperMaterial outer housing: steelFins per Inch: 15Threads: 2 x G1/4“Thread size fan mounting: M3Fan size: 120 mmFan slots: 3 single sided / 6 double sided Download data sheet PDF: Alphacool NexXxoS ST25 Full Copper 360 mm radiator
Kühlblock und Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung
Alphacool is an internationally renowned company in the field of water cooling solutions for both industrial and home users. To ensure that customers receive the best products available, Alphacool is constantly developing new products and making improvements to existing products. Make No Compromises, Use Copper.As usual, Alphacool uses pure copper for the NexXxoS ST25 slim radiators. The end chambers, the water channels and the cooling fins are all made of copper, a unique selling point worldwide. No other manufacturer relies on pure copper for all these components combined. As a result, Alphacool has been producing one of the most popular and highest performing radiators on the market for many years, providing the perfect foundation for every water cooling system. Full Cooling CapacityTo maximize the performance of a radiator, Alphacool reaches deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/(mK) for copper compared to 236 W/(mK) for aluminium, the winner is clear. Alongside this is the special fin density. Alphacool is one of the oldest companies in the field of water cooling and has carried out countless laboratory tests. The result is a fin spacing of 15 FPI. This means that the air flow is only slightly obstructed as the air can pass through even without high pressure. However, the cooling capacity does not suffer from this, on the contrary. To use the airflow optimally, all cooling fins have small serrations. These are tiny flaps that guide the airflow in the desired direction and increase the surface area. In the case of radiators, they are barely 1 mm high, but still provide controlled air turbulence to increase cooling capacity and minimise airflow noise. CompactThe ST25 slim radiators offer the ideal liquid cooling solution for Mini-PCs or SSF (Small Form Factor) systems. Due to the extremely flat design, the NexXxoS ST25 radiators are ideal for such small cases and due to the reduced size, they give you the extra space you need to work in the case. Technical data:L x W x H: 132 x 92 x 25 mmFPI: 15 Material cooling fins: Copper Material chambers: Copper Material cooling channels: Copper Material threads: Brass Material outer housing: stainless steel G 1/4“ threads: 2 x For fan size: 92 mm Possible fan assembly: 1 x one-sided / 2 x both-sidedDownload data sheet PDF: Alphacool NexXxoS ST25 Full Copper 92mm Radiator
It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 420 W at an ambient temperature of 30°C and fans with 12.000 rpm. X-Flow – Find the easy routeFor the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 286 x 40,5 x 60mm Net weight: 644g Maximum working temperature: 60°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 8x M3 threads Fan size: 40mm Fan slots: 6 single-sided / 12 double-sided Fan threads: M3 Pressure-tested: 0,8 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 40mm Hexa Radiator Mounting material Datasheet Manual
It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 490 W at an ambient temperature of 30°C and fans with 12.000 rpm. X-Flow – Find the easy route For the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 326,5 x 40,5 x 60mm Net weight: 657g Maximum working temperature: 60°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 12x M3 threads Fan size: 40mm Fan slots: 7 single-sided / 14 double-sided Fan threads: M3 Pressure-tested: 0,8 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 40mm Hepta Radiator Mounting material Datasheet Manual
It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 440 W at an ambient temperature of 30°C and fans with 6500 rpm. X-Flow – Find the easy routeFor the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 203,5 x 80 x 60mm Net weight: 674g Maximum working temperature: 180°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 4x M3 threads Fan size: 80mm Fan slots: 2 single-sided / 4 double-sided Fan threads: M3 Pressure-tested: 1,5 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 80mm Dual Radiator Mounting material Datasheet Manual
The CORSAIR iCUE H150i ELITE CAPELLIX XT Liquid CPU Cooler provides powerful, high-performance cooling for your processor, with CORSAIR AF RGB ELITE fans, a 360mm radiator, and ultra-bright CAPELLIX LEDs.
It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 880 W at an ambient temperature of 30°C and fans with 6500 rpm. X-Flow – Find the easy routeFor the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 364,5 x 80 x 60mm Net weight: 1049g Maximum working temperature: 180°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 12x M3 threads Fan size: 80mm Fan slots: 4 single-sided / 8 double-sided Fan threads: M3 Pressure-tested: 1,5 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 80mm Triple Radiator Mounting material Datasheet Manual
It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 350 W at an ambient temperature of 30°C and fans with 12.000 rpm. X-Flow – Find the easy routeFor the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 245,5 x 40,5 x 60mm Net weight: 577g Maximum working temperature: 80°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 8x M3 threads Fan size: 40mm Fan slots: 5 single-sided / 10 double-sided Fan threads: M3 Pressure-tested: 0,8 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 40mm Penta Radiator Mounting material Datasheet Manual
Alphacool is an internationally renowned company in the field of watercooling solutions for both industrial and end customer. Constantly innovating and improving both server and home solutions, Alphacool strives to create the perfect solution.Perfect for workstations and serversThe 80 mm NexXxoS radiators are specially designed for server racks and workstations. Due to their low height of only 80 mm and the special M3 mounting holes on the top and bottom, they’re perfect for 1U server racks. Alternatively, the radiators can also be mounted in the classic way using the mounting locations of the fans. M3 screws are also required here.No compromise on materialsAlphacool always uses copper in its NexXxoS radiators. Alphacool is the only manufacturer that uses pure copper for all water-bearing components. Starting with the end chambers, the water channels and the cooling fins, everything is made of pure copper. Only the connecting threads are made of brass, as pure copper would be too soft for the threads and would give way over time.Outstanding cooling capacityThere are several approaches that Alphacool uses to increase the cooling capacity. Using copper ensures the best properties to dissipate the heat. Aluminium, which is often used in low-cost products, is not as good as copper in terms of heat capacity and thermal conductivity.Compared to some other manufacturers, the copper fins are only thinly painted. This means that the cooling performance isn’t affected at all unlike a thick coating of paint which would act as a insulator. The fin spacing is 10 FPI for optimal performance. This means that the fins are close enough together to create a large surface, but also far enough apart not to obstruct the air flow. In addition, all fins are designed to provide controlled air turbulence. This means that the air flowing through the fins is more efficient and is directed exactly where it is needed.X-Flow instead of U-FlowThe water flow in classic PC radiators is U-shaped. This means that the water inlet and outlet are on the same side on the radiator. This has certain advantages in the normal PC, however, it is difficult to set up a reasonable cooling loop like this in an extremely flat server. Due to the X-Flow technology, the input and output are located on the opposite sides. This makes it very easy to create a loop in the server rack. For example, you could go out from one side, directly into a CPU, then into one or more graphics cards and the pump, then back to the radiator on the other side.Versatile connection optionsEach NexXxoS 80 mm X-Flow radiator has 3 ports on each end of the radiator. This means that almost any conceivable mounting position can be achieved. The connections are located on each side in the opposite position and then one at the head ends of the radiators.Alphacool has developed special patented stop plugs that are flush with the radiator to avoid them fouling the case. Previous solutions always exceeded the length or width of the radiator because they were not countersunk.If you are interested in a professional implementation of water cooling for your servers or workstations in your data centre, Alphacool also offers complete solutions with special reservoirs, pumps and coolers. These include highly optimized water coolers for workstation graphics cards and CPUs. To find out more about this, send us your request to: info@alphacool.com Technical dataL x W x H123 x 60 x 80 mm (+/- 3% tolerance in the range of the prechamber)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads6x G1/4" IN/OUT (max. 5mm thread length)Possible fan size80mmPossible fan assembly1x one-sided / 2x both-sidedThread size fan mountingM3Pressure tested0,8 BarMaximum working temperature60°CFin density10 FPIWeight523gColorblackWarranty: 10 years???? Warranty Terms
The flagship ROG Ryujin II all-in-one cooler delivers ultimate thermal performance for gamers looking for the absolute best. With a 7th Generation Asetek pump, Noctua Industrial PPC radiator fans, and an embedded fan for the CPU socket area, it harnesses both water and air to provide incredible cooling capabilities. And with an LCD panel that displays system stats and customizable graphics, ROG Ryujin II become the heart of your system.
The Alphacool Eisbaer Pro Aurora CPU AIO water cooler is a special development for processors with particularly large CPU dies. These include the AMD Threadripper and Epyc processors and the Intel CPUs for the LGA 3647 and LGA 4189 socket.Large cooling surfaceThe cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42 mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. The cooling fins are 0.4 mm thick and also have an optimal distance of 0.4 mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3 mm thick, which allows the heat to reach the water and be dissipated as quickly as possible.Copper radiatorAs per usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water bearing components such as the antechambers, the cooling fins and the cooling channels to which the fins are soldered. The connection threads are made of brass for strength reasons. In addition, the cooling fins are only lightly painted. On closer inspection the copper shimmers through a little. A thick lacquer coating would result in a reduction of the cooling capacity. The fin density is at optimal 15FPI. Therefore the radiator works perfectly even at low airflow. A too high fin density would require fans with higher speed to achieve the same cooling capacity. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen.Real water coolingThe Eisbaer Pro Aurora consists almost entirely of actual water cooling components. The extremely robust and durable TPV hoses are used in the enterprise products for servers and workstations. The hose connections also come from the Enterprise series from Alphacool and use the standard G1/4". This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows easy expansion of the AIO with additional components. The most important of these are the prefilled radiators and the Eiswolf GPU AIO water cooling system.Fan and lightingThe entire Eisbaer Aurora Pro cooler is equipped with addressable digital RGB LEDs. This gives a real eye-catcher in the Case. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. Inaddition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. Of courseall Digital RGB LEDs can be controlled at will. Depending on the controller almost all effects are possible.How to connect everythingThe fans are normally controlled via a 4-pin PWM connector. An included Y-adapter for the fans makes it easy to connect them to the mainboard. This allows all fans to be controlled and regulated via one connector. Each fan has a 3-pin JST connector including Y-adapter for the LED illumination. This allows the fans to be connected directly together and can also be controlled simultaneously via a controller. For the connection to a typical 3-pin 5V connector a corresponding adapter is included. Alternatively, the included Digital RGB controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard.The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market.With the Alphacool LGA 4677 Mounting Bracket (article no.: 13764), this cooler is also compatible with the Intel socket LGA 4677. Compatibility:AMD: AM4 / AM5 / SP3 / SP6 / sTR5 / sWRX8 / TR4Intel: LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 3647 / LGA 4189 (optional) / LGA 4677 (optional) Technical data radiatorL x W x H279 x 124 x 30 mm (+/- 3% in the range of the pre-chambers)Material cooling finscopperMaterial chamberscopperMaterial cooling channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads2x G1/4"For fan size120 mmFan mounting options2 x one-sided / 4 x both-sidedTechnical data cooler and pumpL x W x H64 x 79 x 54,3 mmMaterial cooler bottomNickel plated copperMaterial cooler topPMMAThreads2 x G1/4“ (+ 1x Fillport G1/4“)Pump typDC-LT 2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13,5V DCPower consumption3,2WMTBF50.000 hNumber of aRGB Digital LED10Technical data tubeLength40 cmMaterial tubeTPV (EPDM/PP)Colorblack mattTube size12,7 / 7,6 mmHardness grade35 Shore-A to 50 Shore-DWorking temperature-50 to +155 °CTechnical data fittingsL x D straight fitting24 x 18 mmQuantity straight fittings4xFor tube size12,7 / 7,6 mmMaterial fittingsnylonTechnical data quick fastenersL x D95 x 27 mmMaterialnylonFor tube size12,7 / 7,6 mmColorblackTechnical data fanSpeed0 - 2500 RPMStatic pressure3,17 mm/H2OAir flow rate119,8 m³/hBearingsSleeve bearingFan connector4-Pin PWMNumber of aRGB Digital LEDFrame: 12 / Hub: 8Connection Digital aRGB3-Pin JST + 3-Pin 5VDimensions120 x 120 x 25 mmMax working temperature60 °CWarranty: 3 years???? Warranty Terms
The CORSAIR iCUE H100i ELITE CAPELLIX XT Liquid CPU Cooler provides powerful, high-performance cooling for your processor, with CORSAIR AF RGB ELITE fans, a 240mm radiator, and ultra-bright CAPELLIX LEDs.
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Double-ThreadedThis adapter has a ¼” external screw thread. This allows, for example, two sockets with ¼” internal threads to be connected. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Length: 22mm Diameter: 18mm Scope of Delivery: 1x Alphacool Eiszapfen double nippel rotatable G1/4 outer thread to G1/4 outer thread - deep black
CORSAIR AF120 RGB ELITE high-performance 120 mm PWM fans deliver PWM-controlled fan speeds from 550 rpm up to 2100 rpm for powerful cooling, quiet operation, and brilliant RGB lighting.
The new fittings from Alphacool’s Enterprise Solutions series were specially developed for the Alphacool TPV tubing. The metal connection can be tightened with the TPV hose and has a very high tensile strength. Technical Data: Material: Brass/Aluminium Colour: Black Length: 24 mm Diameter: 18 mm Thread: G1/4" Hose size: 12,7 / 7,6 mm
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The slanted edges of the nut make sure the O-ring sits tight against the HardTube, so that it is even more secure than in its predecessors. This provides more security in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: HardTube Compression Fitting 16mm This connector has a 1/4" outer thread. The other side fits HardTubes with an outer diameter of 16mm. Technical Details Material: brass Colour: chrome Dimensions Diameter: 21mm Height: 18mm Scope of Delivery 1x Alphacool Eiszapfen 16mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - chrome sixpack
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:This connector can be used to connect 13/10mm tubing with a 1/4“ thread. Technical specifications: Material: Brass, chromatizedColour: Chrome Dimensions:Width: 20mmHeight: 23mm Hose size compatibility : 13/10mm Extent of delivery:1 x Alphacool HF Screw connector G1/4 outer thread on 13/10 - Chrome This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)
Alphacool connectors are breaking new ground in form, design, colour, and variety. The newest innovation is an outstanding inner diameter that really earns the descriptor “high flow”! The first 3 colours, chrome, deep black and shiny copper, offer a great variety to suit many tastes. The fully coordinated product series gives every system a chance to shine, and the customization options are endless when paired with Alphacool tubing! A new chromatization technique binds the colouring tightly to the brass surface. This improves the longevity of the intense colour and prevents any chipping of the chrome layer. Blue Alphacool lettering on some of the connectors also highlights the uniqueness of these parts. Model: Straight Compression Fitting 16/10mm This connector has a ¼” thread on one side and is compatible with 95% of all components. The other side fits a 16/10 hose. Sixpack: Since six connectors of one kind are often necessary, Alphacool is now offering Sixpacks. This has a lot of advantages for you! Technical Details: Material: chromatized brass Colour: chrome Dimensions: Width: D23mm Height: 23mm Scope of Delivery: 1x Alphacool HF 16/10 Compression Fitting G1/4 - Chrome Sixpack This product has been tested for you:
