Tootja: AKYGA Tootegrupp: ventilaator korpustele Fan's size class: 120 mm ventilaatori laagri tüüp: liugelaager ventilaatori pöördekiirus: -1000 pööret minutis ventilaatori müratase: -20 dB laius: 120 mm kõrgus: 120 mm paksus: 25 mm toite ühenduse tüüp: 4-pin Termistor: Ei vastupidavus: 30000 tundi õhuvool: -1100000 cm3/min LED kogus: 4 tk LED värv: sinine Lisaandmed: andmed puuduvad Lisainfo: Product site
Tootja: AKYGA Tootegrupp: ventilaator korpustele Fan's size class: 120 mm ventilaatori laagri tüüp: liugelaager ventilaatori pöördekiirus: -1000 pööret minutis ventilaatori müratase: -20 dB laius: 120 mm kõrgus: 120 mm paksus: 25 mm toite ühenduse tüüp: 4-pin Termistor: Ei vastupidavus: 30000 tundi õhuvool: -1100000 cm3/min LED kogus: andmed puuduvad LED värv: andmed puuduvad Lisaandmed: andmed puuduvad Lisainfo: Product site
This connection cable can be used for connection of different devices from aquacomputer via the aquabus interface. Technical specifications: 4-Pin molex socket to 4-Pin molex plug, 1:1 connection Length approx 40cm incl. connectors
Three-core cable for connecting the flow sensor to the aquaero. Length approx. 30 cm, plug on both sides (special plug on the sensor). The cable can be extended if required using a standard 3-pin fan extension cable. The matching connection cable for the flow sensor G1/4" (3.3mm) article number: 71004 & flow sensor G1/4 (5.6mm) (without cable) article number: 71045
Toote kirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a matte black, straight adapter with two 1/4 inch external threads. Technical details:Material: MessingColor: matt blackConnections: male thread: 2x 1/4 inch
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a straight G1 / 4 inch screw connection for 11 / 8mm hoses with union nut in a matt black version. Note:We recommend an 18 mm open-end wrench for the installation and removal of the connection. Please note that even when using tools the connection may only be tightened hand-tight. You can find our tool here . Technical details:Material: brassColor: matt blackThread: G1 / 4 inchesSuitable for: 11/8 mm hose
The adapter from Bitspower in the color matt black has a G1/4 inch internal thread and a G1/4 inch external thread. Technical Data: Material: Brass Main Color: Matt Black Thread: 1x G1/4", 1x Inner G1/4" Thread Length: 5 mm
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a straight G1 / 4 inch screw connection for 10 / 8mm hoses with union nut in a matte black edition. Compared to the normal version of the hose connection is slightly less tapered. Although this requires a slightly more difficult attachment, but provides a tighter fit. Note: We recommend for the installation and removal of the connection an 18-mm open-end wrench. Please note that even when using tools the connection may only be tightened hand-tight. You can find our tool here . Technical details:Material: brassColor: matt blackThread: G1 / 4 inchesSuitable for: 10/8 mm hose
The adapter in the color shiny silver from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Connection: 12 mm (OD) Thread: G1/4" Thread Length: 5 mm
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a matte black, straight 1/8 inch OD to G1 / 4 inch female adapter specifically designed for the outlet of an Eheim 1046 pump. Before screwing in the adapter, the sealing ring should be coated with a lubricant, as otherwise it could be pulled out of its groove and exerts too much pressure on the plastic ring of the pump in the upper area. Alternatively, it is sufficient not to fully screw the adapter, but only up to the rubber itself. Technical Details:Material: brass, black nickel platedColor: matt blackConnections: Male Thread: 1/8 inch Female Thread: G1 / 4 inchesFor: outlet Eheim pump 1046
The adapter in the color shiny black from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Black Connection: 12 mm (OD) Thread: G1/4" Thread Length: 5 mm
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a straight and matte black G1 / 4 "fitting for 3/8" or 10mm ID tubing in Real Hi-Flow design. Since no union nut is used, any tube thickness and thus outer diameter can be used. To fix the hoses on the connection, we recommend a cable tie or a hose clamp as a precaution. Note: We recommend a 15 mm open-end wrench for installation and removal of the connection. Please note that even when using tools the connection may only be tightened hand-tight. You can find our tool here . Technical details:Material: brassColor: matt blackThread: G1 / 4 inchesSuitable for: 10 mm hose (inner diameter)
The plug in white from Bitspower, can be screwed into a G1/4" internal thread for a certain time or permanently, e.g. to close radiators or equalizing tanks. Technical Data: Material: Brass Colour: White Thread: G1/4" Thread Length: 5 mm
The sealing plug in the colour shiny black from Bitspower can be screwed into a G1/4" internal thread for a certain time or permanently, e.g. to seal radiators or equalising tanks. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Black Thread: G1/4" Thread Length: 5 mm
The nickel-plated extension of Bitspower in carbon black has a G1/4" internal thread and a G1/4" external thread. Without external thread, the extension extends the tubing of a water cooler by 1.5cm. Technical Data: Material: Nickel-Plated Brass Color: Carbon Black Thread : G1/4" and Inner G1/4" Thread Length : 5 mm Application Length: 15 mm
Tootja: AKYGA Tootegrupp: ventilaator korpustele Fan's size class: 80 mm ventilaatori laagri tüüp: liugelaager ventilaatori pöördekiirus: -2000 pööret minutis ventilaatori müratase: -25 dB laius: 80 mm kõrgus: 80 mm paksus: 25 mm toite ühenduse tüüp: 4-pin Termistor: Ei vastupidavus: 30000 tundi õhuvool: -616 cm3/min LED kogus: andmed puuduvad LED värv: andmed puuduvad Lisaandmed: andmed puuduvad Lisainfo: Product site
120mm Dual-Radiator von Corsair, Kupfer- und Messing-Aufbau, bis zu vier 120-mm-Lüfter in Push/Pull-Konfiguration, 55 Millimeter Dicke und 13 FPI, 2x G1/4-Anschlüsse
The nickel-plated extension of Bitspower in the colour shiny black has a G1/4" internal thread and a G1/4" external thread. Without an external thread, the extension extends the tubing of a water cooler by 1.5 cm. Technical Data: Material: Nickel-Plated Brass Color: Shiny Black Thread : G1/4" and Inner G1/4" Thread Length : 5 mm Application Length: 15 mm
The None Chamfer PETG Link Tube in transparent by Bitspower is made of polyethylene terephthalate, PETG for short. This material is a plastic and is used, for example, for PET bottles. Its strength lies in its high break resistance, easy heatability and high stability. In order to implement them in the system, it is necessary to bend them into shape with heat and cut them to size. As a rule, the None Chamfer does not need to be reworked when it is cut. The tube measures 50cm in length, 14mm in outer diameter and 11mm in inner diameter. Only the EML series from Bitspower is compatible as connections. Technical Data: Material: PETG Color: Transparent Outer Diameter: 14 mm Inner Diameter: 11 mm Length: 50 cm Compatibility: EML series Bitspower connectors only
