480-mm-Radiator mit 30 mm Dicke in Schwarz, bis zu acht 120er-Lüfter in Push/Pull-Betrieb, Finnen aus Kupfer und Kanäle aus Messing, exklusives Design durch Edelstahlapplikationen, kompakte Maße und hochwertige Verarbeitung, 2x G1/4-Anschlüsse
The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical dataDimensions (L x W x H)517 x 124 x 46mmQuantity of cooling channels24Cooling channelsCopperColorblackFan threadM3Connection6x G1/4"SlatsCopperThickness39 - 49mmNumber of fans4Fan size120mmHousingSteelManufacturerAlphacoolFins per inch12Pressure tested0,8 bar
The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.This Radiator can discharge up to 1600 W at an ambient temperature of 30°C and fans with 4000 rpm.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical dataDimensions (L x W x H)277 x 124 x 60mmQuantity of cooling channels36Thickness49 - 69mmCooling channelsCopperColorblackFan threadM3Connection6x G1/4"SlatsCopperNumber of fans2Fan size120mmHousingSteelManufacturerAlphacoolPressure tested0,8 barFins per inch10
The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical dataDimensions (L x W x H)468 x 144 x 86mmQuantity of cooling channels58Cooling channelsCopperColorblackFan threadM3Number of fans3Connection6x G1/4"SlatsCopperThickness69 - 100mmHousingSteelManufacturerAlphacoolPressure tested0,8 barFins per inch10Fan size140mm
The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are available in different versions to be use with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical dataDimensions (L x W x H)607 x 144 x 86mmQuantity of cooling channels58Cooling channelsCopperColorblackFan threadM3Connection6x G1/4"SlatsCopperNumber of fans4Thickness69 - 100mmHousingSteelManufacturerAlphacoolPressure tested0,8 barFins per inch10Fan size140mm
Now finally also with us the Black ICE Nemesis radiators The Black Ice® Nemesis® GTS radiators are the next generation of computer radiators from Hardware Labs. These radiators offer an improved cooling performance when using
Alphacool Dual-Flow radiators were developed specifically for use in servers. The ability to run two separate loops through one radiator is unique. There are also advantages to using them in a single loop as you can split the cooling surface and use it directly behind hotspots.What does dual flow mean?The water flow in a classic radiator is in a U-shape. Water is introduced on one side, runs once through half of the radiator before turning around and running back through the other half. The outlet is on the same side as the inlet. In an X-Flow radiator, the water flows once from left to right completely through the radiator. The inlet and outlet are on opposite sides. With the Dual-Flow Radiator, the water flows from one side to the other just like the X-Flow. However, the Dual-Flow Radiator is divided in the middle. You could also say the Dual-Flow Radiator is nothing more than two small X-Flow Radiators in one.What are the advantages?In most server racks, space is extremely limited and being able to do fancy loops is not usually an option. Due to this you can utilise the radiator to simplify the loop and reduce the amount of tubing needed. In some test scenarios, we have even seen an increase in performance from the loop due to this method too.Many connection and mounting optionsThe radiator offers 3 connection options at each input and output. In total, the radiator has 12x G1/4" connections. Thus, versatile mounting requirements can be met. The radiator comes with all screws for mounting inside a case or server rack and for mounting the fans. Additional screws are usually not needed. There is also a protective plate between the mounting holes and the cooling fins. This is to prevent overly long screws from damaging the cooling fins and cooling channels.Choice of materialsAlphacool is the only manufacturer in the world to use only copper in all water-carrying parts in the radiator. The pre-chambers and the cooling channels are made of copper. The connection threads are made of brass and the cooling fins are also made of copper. Only the side parts to protect the cooling fins are made of sheet steel. Technical dataL x W x H415 x 125 x 60 mmQuantity of cooling channels36Material cooling finscopperMaterial cooling channelscopperPrechamber materialcopperMaterial outer housingsteelFins per Inch12Threads12x G1/4“Thread size fan mountingM3Fan size120 mmFan slots3 one-sided / 6 double-sidedPressure tested0,8 barMax working temperature60 °CWeight1537 gColourSchwarz
HEATKILLER RAD radiators are powerful, high-quality processed and offer an impressive design for the realization of your build.We have expanded our range of high-quality radiators of the HEATKILLER RAD series with 280 and 420mm versions. Thereby we rely on the highly popular slim format (S) with a height of 30mm. In addition to the increased performance, the radiators are characterized by their compact dimensions and the characteristic high-quality Watercool workmanship. Finishing and quality control in Germany In cooperation with a well-known manufacturer from Asia, we have succeeded in creating a high-performance mesh radiator with a unique look. The cooling cores are manufactured strictly in accordance with our specifications. The radiator housing is produced directly on our premises in Waren, which means that the assembly and quality control are ultimately performed in Germany. High cooling performance over the entire speed range The goal of the development was to produce competitive radiators with a wide performance range. Accordingly, the HEATKILLER RAD provides a very good cooling performance with slow rotating fans, which scales very well with increasing speed. For maximum cooling performance, the HEATKILLER RAD can of course also be used in push/pull mode. The best raw materials in use Only high quality raw materials are used as basis for the HEATKILLER RAD. The pre-chamber and the cooling channels are made of brass and the cooling fins are made of Copper. The side panels are laser-cut from 1mm thick steel plates or stainless steel and subsequently brushed or powder-coated in black or white, depending on the finish.The front sides are made of brushed stainless steel and significantly contribute to the exclusive look of our HEATKILLER RAD. Easy integration into the cooling circuit The integration into the cooling circuit is done with two standard G1/4 inch threads. The required connections are not included in the scope of delivery. The small width of only 120mm ensures a maximum of flexibility. Technical data: Dimensions: 320 x 140 x 30mm Weight: 0,87Kg Color: Brushed Stainless Steel Connectors: 2 x G¼" thread Fan compatibility: 140mm fans Radiator mounting: M3
For more than a decade, Alphacool has dominated the market with its Full Copper radiator series. Our extensive portfolio of radiator variants is unique worldwide, just like our manufacturing process, which enables us to craft all water-bearing parts and cooling fins from pure copper. Thanks to their exceptional performance, these radiators can effortlessly dissipate even extremely high waste heat, making them indispensable in many sectors of the cooling industry.The next step in evolution: HPE Full Copper Radiator!The Full Copper HPE Radiator uses the same materials as the previous NexXxoS models but takes a technical step forward. With a denser internal structure, the number of water channels and copper fins has been increased. This design ensures a larger water volume is in direct contact with the cooling fins, significantly enhancing heat transfer. The increased number of fin rows and their shortening also results in a much more efficient utilization of the cooling surface. Comparison tests with the conventional NexXxoS radiator have demonstrated that the HPE radiator can achieve a performance improvement of 4.5K. At higher ambient temperatures and fan speeds, the performance gap between the HPE and standard NexXxoS radiators increases progressively, with possible performance gains of up to 6K.Connection options & mountingThe HPE radiator features two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side, there is a fill or drain port for filling and draining the water circuit. The radiator comes with all necessary screws for case and fan installation. Additional screws are typically not required.Safety firstThe HPE radiator is equipped with special protective plates beneath all mounting holes to prevent screws from being inserted too deeply. This ensures the cooling fins and water channels underneath are protected from damage.Patented screw plugsAll HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often prevent the radiator from being installed flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface, allowing for easy and seamless installation in the case. Technical dataDimensions (L x W x H)314.5 x 144 x 45mm (+/- 3%)Quantity of cooling channels28Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size140mmPossible fan assembly2x one-sided / 4x both-sidedThread size fan mountingM3Pressure tested0.8 BarMaximum working temperature60°CFin density16 FPIWeight1130gColorwhiteWarranty: 10 years???? Warranty Terms
Phobya R27-S280 Black Radiator – Powerful cooling performance with dual 140mm fan option The Phobya R27-S280 Black Radiator is an excellent choice for powerful PC systems that want to benefit from the high airflow and quiet operation of 140mm fans. With support for two of these fans, it offers a generous cooling surface and balanced performance. High-quality materials for reliable efficiency: As with all radiators in the Phobya R27 series, only high-quality materials are used in the S280. The fine fins are made of 99.9% copper with a density of 18 FPI (fins per inch), enabling optimal heat dissipation. The water channels are made of H65 copper, while robust H62 brass is used for the pre-chambers and the sturdy G1/4 inch connections. This guarantees a long service life and excellent thermal conductivity. Well-thought-out design for flexible applications: With its dimensions of 313.5 × 140 × 27 mm, the R27-S280 offers considerable cooling capacity while still fitting into many common cases designed for 280 mm radiators. Its weight of 660 grams reflects its solid construction. Optimal fan compatibility for efficient airflow: The radiator is designed to accommodate up to two 140 × 140 mm fans. This configuration provides powerful yet often quieter airflow compared to smaller fan formats with the same cooling performance. Matching M4 screws for 30 mm thick fans and 6 mm mounting screws are included. Tested quality and environmental awareness: Each Phobya R27-S280 radiator undergoes a 1-bar pressure test to ensure absolute leak-tightness and reliability. Furthermore, the radiator is RoHS compliant, confirming compliance with current environmental guidelines. Technical data at a glance: Fin material: High-quality copper (99.9%), 18 FPI Material channels: copper H65 Material pre-chambers & threads: Brass H62 Connections: G1/4 inch Dimensions ( L × W × H ): 313.5 × 140 × 27 mm Weight: 660 g Fan compatibility: Up to 2 × 140 × 140 mm fans Supplied screws: M4 for 30 mm fan, 6 mm mounting screws Pressure tested: 1 bar RoHS compliant The Phobya R27-S280 Black Radiator is the ideal solution for users looking for powerful and efficient cooling with 140mm fans in a well-sized format.
Phobya R27-S120 Black Radiator – Compact cooling performance for your system Experience efficient and reliable cooling for your system with the Phobya R27-S120 Black Radiator. This compact radiator is designed to ensure optimal heat dissipation even in demanding environments and maximize the performance of your components. High-quality materials for maximum efficiency: The Phobya R27-S120 relies on a sophisticated material combination for optimal cooling results. The fins are made of high-quality 99.9% copper with a density of 18 FPI (fins per inch), providing a large surface area for heat exchange. The water channels are also made of copper (H65) to ensure excellent thermal conductivity. Durable brass (H62) is used for the pre-chambers and the robust G1/4 inch connections, guaranteeing durability and a secure connection. Compact design, easy integration: With its slim dimensions of 153 × 120 × 27 mm, the R27-S120 easily fits into even more compact cases. Despite its small size, it offers impressive cooling performance. Its low weight of just 348 grams also makes installation easy. Flexible fan compatibility and easy installation: The radiator is designed for use with a 120 × 120 mm fan. M4 screws for 30 mm thick fans and 6 mm mounting screws are included for easy installation. Tested quality and environmental awareness: Each Phobya R27-S120 radiator undergoes a 1-bar pressure test to ensure leak-tightness and reliability. Furthermore, the radiator is RoHS compliant, thus meeting current environmental guidelines. Technical data at a glance: - Fin material: High-quality copper (99.9%), 18 FPI - Material channels: copper H65 - Material pre-chambers & threads: Brass H62 - Connections: G1/4 inch - Dimensions (L × W × H): 153 × 120 × 27 mm - Weight: 348 g - Fan compatibility: 1 × 120 × 120 mm fan - Supplied screws: M4 for 30 mm fan, 6 mm mounting screws - Pressure tested: 1 bar - RoHS compliant Rely on the Phobya R27-S120 Black Radiator for a powerful, reliable and compact water cooling solution.
Phobya R27-S480 Black Radiator – Maximum cooling capacity for extremely powerful systems The Phobya R27-S480 Black Radiator is the ultimate cooling solution for high-end systems and enthusiasts who don't want to compromise on cooling performance. With its impressive size, it's designed to reliably keep even the hottest components at optimal temperatures. High-quality materials for superior efficiency: With the R27-S480, Phobya also relies on a first-class material combination for maximum heat dissipation. The fins are made of high-quality 99.9% copper with a density of 18 FPI (fins per inch), providing a massive surface area for heat exchange. The water channels are also made of copper (H65) to ensure outstanding thermal conductivity. Durable brass (H62) is used for the pre-chambers and the robust G1/4 inch connections, guaranteeing durability and a secure connection. Large-area design for extreme cooling performance: With its impressive dimensions of 513 × 120 × 27 mm, the R27-S480 offers a massive cooling surface, ideal for use in systems with multiple overclocked CPUs, graphics cards, or other heat-intensive components. Its weight of 932 grams underscores its solid construction and high copper content. Maximum fan compatibility and easy installation: The radiator is designed to accommodate up to four 120 × 120 mm fans, enabling enormous airflow for unparalleled cooling performance. M4 screws for 30 mm thick fans and 6 mm mounting screws are included for easy installation. Tested quality and environmental awareness: Each Phobya R27-S480 radiator undergoes a 1-bar pressure test to ensure leak-tightness and reliability under all conditions. Furthermore, the radiator is RoHS compliant, thus complying with current environmental guidelines. Technical data at a glance: - Fin material: High-quality copper (99.9%), 18 FPI - Material channels: copper H65 - Material pre-chambers & threads: Brass H62 - Connections: G1/4 inch - Dimensions (L × W × H): 513 × 120 × 27 mm - Weight: 932 g - Fan compatibility: Up to 4 × 120 × 120 mm fans - Supplied screws: M4 for 30 mm fan, 6 mm mounting screws - Pressure tested: 1 bar - RoHS compliant If you are looking for maximum cooling performance for your demanding system, the Phobya R27-S480 Black Radiator is the first choice.
A high-airflow ARGB 120mm Fluid Dynamic Bearing fan is a balanced combination of incredible aesthetics, cooling capabilities and quiet operation. Reversed fan blade design with reversed airflow compared to regular version Customizable speeds of up to 1850RPM with incredible airflow of 75CFM Fluid Dynamic Bearings for long lasting operation Quiet operation with maximum noise level of 34dB(A) Addressable RGB LEDs that illuminate fan bladesWarranty: 2 Years RGB Connector: 3-Pin A-RGB Connector Power Connector: 4-Pin PWM Connector Speed: 800 - 1850RPM ± 10% Air Flow: 75CFM / 127.42 m³/h Static Pressure: 2.23 mmH₂O Maximum noise level: 34 dBA (Max) Bearing: Fluid Dynamic Bearing Current: 0.2A Voltage: 12V
The Valkyrie V360 AIO pairs bold visual design with flagship performance. A high-speed, award-winning pump powers the system, while our radiator-cooling optimised fans deliver massive airflow and static pressure with near-silent precision. And with a vibrant 3.5" LCD screen front and center, your system’s performance finally looks as good as it runs. Patented high-speed pump for extreme thermal efficiency 2x Valkyrie S12 fans optimised for radiators 3.5" IPS LCD display with 60Hz refresh rate 5-year warranty
