This CPU cooler is especially well-suited for budget and mid-range gaming PCs. Whether with ARGB lighting or without, the cooler offers optimal cooling for the heart of your build, thanks to its powerful, efficient, and durable fan. Durable and low-vibration operation thanks to fluid dynamic bearing Four heatpipes ensure efficient heat transfer Supports both current and older Intel and AMD sockets High airflow and static pressure efficiently cool the heatsink Montech NX400: CPU cooler for the budget and mid-range segment A fan with a fluid dynamic bearing and a large aluminum heatsink with four heatpipes: these two features define the Montech NX400 CPU cooler. Although the cooler is designed for budget and mid-range gaming PCs, it can even efficiently handle CPUs like the Intel Core i9. Powerful fan with long lifespan In addition to a high speed of 2,000 revolutions per minute, as well as high airflow and static pressure, the fan also boasts a particularly long lifespan. This is due to the bearing in the fan, which enables vibration-dampened and long-lasting rotor operation. Vibration-dampening pads also help to reduce fan vibrations and completely eliminate any resonance that could cause unwanted noise.
This CPU cooler is particularly well-suited for budget and mid-range gaming PCs. Whether with or without ARGB lighting, the cooler offers optimal cooling for the heart of your build thanks to its powerful, efficient, and long-lasting fan. ARGB lighting in the fan Durable and low-vibration operation thanks to fluid dynamic bearing Four heatpipes ensure efficient heat transfer Supports common and legacy Intel and AMD sockets High airflow and static pressure efficiently cool the heatsink Montech NX400: CPU cooler for the budget and mid-range segment A fan with a fluid dynamic bearing and a large aluminum heatsink with four heatpipes: these two features define the Montech NX400 CPU cooler. Although the cooler is designed for budget and mid-range gaming PCs, it can efficiently handle even CPUs like the Intel Core i9. Powerful fan with long lifespan Alongside the high speed of 2,000 revolutions per minute, and a high airflow as well as static pressure, the fan also offers an especially long lifespan. This is thanks to the bearing in the fan, which enables both low-vibration and long-lasting operation of the rotor. Vibration-damping pads also help to reduce fan vibrations and completely eliminate any resonance that could lead to unwanted noise.
Worldwide the non-plus ultra in fan constructionPatented high-tech developed in Germany! With its own developed and patented (((Noiseblocker)))® technology, (((Noiseblocker)))® introduced a new era in fan construction in the year 2008.The Multiframe S series made by (((Noiseblocker)))®, which is generally recognised as the reference standard, is the first fan with a vibration-free fan frame and incorporates numerous other improvements, so that it is superior to standard fans in almost all aspects.In conjunction with the unique (((Noiseblocker)))® technology, our almost noise-free NB-NanoSLI® bearing and the NB-EKAPlus II drive, the NB-Multiframe® S series currently represents the best that German engineering expertise has to offer. Quality you can rely on! Detailed information:- A unique, multipart vibration-free chassis with integrated structure-borne sound absorbers and glass fibre-reinforced frame.- Extremely low start voltage!- Easy assembly.- NB-EKAPlus II wide-range drive with low impulse noise.- Verified technical data.Stated volume confirmed by the German Technical Inspection Agency (TÜV)!Highest Levels of Reliability:- Reverse pole and overload protection, restart function, extremely failsafe, 6-year guarantee.- Almost noise-free bearings.- xtremely low-noise and long-life NB-NanoSLI® bearings.Highest Quality- Extremely precise manufacturing, weighted frame with Deepsound Design.- Scope of delivery includes assembly material and additional sealing/ decoupling frame.- 6-year guarantee.SobilikArvuti korpusTüüpVentilaatorMüratase (suur kiirus)6 dBToote värvMust, HallVõimsustarve (tüüpiline)0,36 WKasutamistemperatuur (T-T)-10 - 70 °CHoiustamistemperatuur (T-T)-30 - 80 °CKaal75 gMõõdud (l x s x k)80 x 80 x 25 mmPöörlemiskiirus1200 RPMToote tööiga180000 h
Die neue Scythe GlideStream 140 Serie kombiniert das bewährte Konstruktionskonzept "kleine Nabe & große Rotorblätter" mit nennenswerten, neuen Merkmalen: Mit Rillen versehene Blätter welche für noch geringeren Luftwiderstand sorgen, und mit Gummi-Einlagen ausgestatteten Montagelöchern um mögliche Vibrationen des arbeitenden Lüfters zu absorbieren.Eine weitere Besonderheit dieser Serie sind die 120 mm Bohrungen der Montagelöcher. Die Serie wird in vier unterschiedlichen Umdrehungszahlen angeboten (darunter auch ein PWM-Modell) und bietet daher vielseitige Anwendungsmöglichkeiten. Technische Daten: Abmessungen: 140 x 140 x 25 mm Farbe: Schwarz Spannung: 12V Drehzahl: 800 U/min (+/- 10%) Geräuschentwicklung: 21,4 dBA Föderleistung: 49,95 CFM, 84,862 m³/h Lager: Gleitlager Anschluss: 3 Pin Molexstecker Lebensdauser: 30.000 h Datenblatt Lieferumfang: 1x Scythe Glide Stream 140 SY1425HB12L 800rpm ( 140x140x25mm ) 1x 4-pin Molex Adapter 4x Befestigungsschrauben
Technical specifications: Application: fan for PC caseDimensions of the fan: 40 x 40 x 10mmRotational speed: 5400 rpmAir flow: 5.62 CFMAir pressure: 2.41mm H20Lifetime: 30000 hoursBearing type: slidingVoltage: 12VNoise level: 24.87 dB (A)Black colour
StarTech.com FAN8X25TX3L. Sobilik: Arvuti korpus, Tüüp: Ventilaator, Ventilaatori läbimõõt: 8 cm. Toote värv: Must, Materjal: Plast. Pinge: 12 V. Laius: 25 mm, Sügavus: 80 mm, Kõrgus: 80 mm. Mõõdud (l x s x k): 80 x 80 x 25 mm, ...
Dust can be a computer system’s worst enemy as it has the potential to lower cooling performance or cause damage when left overly accumulated. But most fan filters are a hassle to install so SilverStone created an easy to use FF141 fan filter.The FF141 has embedded magnet in its frame so it can be effortlessly attached to any steel chassis without tools. Its 140mm size is also compatible with most 120mm fan vents so it can be used in many places that require filtering. In addition to filtering dust, the FF141’s grille can reduce noise associated with air turbulence. So for those looking for dust reduction for component longevity with increased cooling efficiency, the FF141 is an excellent buy.Technical detailsMaterial ABS syntheticsColour of product BlackWeight & dimensionsWeight 22 gWidth 140 mmDepth 140 mmHeight 3 mmOther Featuress1
The Argon series coolers are designed to provide the best cooling solutions for your CPU. The Argon AR06, at 58mm high including fan, Featuress four 6mm thick copper heat pipes connect to the base using heat-pipe direct contact (HDC) technology. A highly efficient 92mm PWM fan tuned for optimal balance of airflow and noise is included to provide up to 95W of cooling power (or more in case with efficient airflow). For users requiring enhanced performance in space constrained applications, the high quality and affordable AR06 is a great choice.Attachment for ATX-MainboardsSocketsuitable AM2, AM2+, 1156, AM3, 1155, AM3+, FM1, 1150, FM2, FM2+MaterialAluminum YesCooper YesPower Connection PWM fan connectorFan Bearing RifleNumber of Revolutions 1200 - 2500 rpmVolume 20 - 28.3 dB(A)Volumetric Flow 0 - 68.3 m3/h, 0 - 40.2 cfmDimensionsFans Fan 1 92 x 92 x 15 mmTotal 105 x 58 x 92 mmWeightCooler 263 grams
Fan screw set for fastening fans up to 25mm depth.- 4x M3x30mm screws- 8x washers- 4x spring washers- 4x M3 nutsToote värvHõbeVentilaatori läbimõõt2,5 cm
With years of experience building high performance casing designs, SilverStone’s R&D team understands the importance of thermal, noise, and dust-prevention in any modern PCs. To address the lack of standalone accessories that help to improve these three performance metrics, the team has decided to release the FF124, a filter that is built to also reduce vibration and noise. Constructed in combination with silicone, this smartly designed product can help reduce case fan noise by half (equivalent of 4dBA) compared to similar products on the market when used between the fan and the case. Its slim profile also ensures that the FF124 can be installed on nearly any standard 120mm fan mounts.- Made with vibration-absorbing silicone material for up to 4dBA noise reduction- Ultra fine filter provides great dust reduction properties- Designed to fit tightly with standard 120mm fan mountsToote värvMust, KollaneMaterjalABS-sünteetika, SilikoonLaius120 mmSügavus120 mmKõrgus22 mmKaal5 g
Müratase (suur kiirus)31,07 dBÜhilduvusSocket T / LGA775Socket LGA1156Socket LGA1366Toote värvMustKaal495 gMõõdud (l x s x k)94 x 108 x 143 mmPöörlemiskiirus2500 RPMÕhuvool12 - 95 m³/h = 6.7 - 55.55 CFM
Aqua Computer AirPlex Radical 2/420mm AluminumThe airplex radical series combines some key features from the renowned airplex modularity series in a new design, radically reduced to function and performance. The result is a radiator of excellent quality for a competitive price. Just as the airplex modularity series, no welding is performed during production of the airplex radical series, preventing any welding residues inside the radiator. The coolant does not have contact to any other materials than seals, Delrin, copper and stainless steel.For an improved and easier installation process, the airplex radical series comes with threaded inserts made from nickel plated brass that protrude into the mounting holes of the fans. Therefore, fans are "automatically" correctly aligned to the threads - extremely convenient especially with large radiators! Additionally, this results in a deeper thread and the screw can be positioned farther away from the tubes and fins of the radiator, reducing the risk to damage the radiator by using too long screws. If the radiator is to be installed without fans, the inserts can also be installed upside-down resulting in a nearly flat surface, so there is no gap between radiator and PC case.Both sides of the radiator are equipped with slide rails for the threaded inserts and inserts for one side of the radiator are included in delivery. Additional inserts are available separately. Small notches in the slide rails lock the inserts when installed.The radiator frame is made from stainless steel, the rear is chromated in dark gray for optical purposes. The total dimensions of the radiator are extremely compact in relation to the fin dimensions.Technical details:Dimensions: 460 x 140 x 40 mmConnection threads: G 1/4Threaded inserts: M3Connection terminal material: DelrinTube material: CopperFin material: AluminumFrame material: Stainless steel
EK-FC980 GTX Ti Classy KPE Backplate is a retention backplate made of black anodized aluminum for EK-FC980 GTX Ti Classy KPE series water block.Backplate covers the whole lenght of graphics cards PCB, serves as an aesthetic add-on and also provides passive cooling for the backside of voltage regulation module (VRM).This backplate is guaranteed to be compatible only with EVGA design GeForce GTX 980 Ti Classified K|NGP|N edition graphics cards.Toote värvHõbeÜhilduvusEK-FC980 GTX Ti Classy KPEMaterjalNikkel
The aqualis DDC 100 ml reservoir from aqua computer is designed for direct mounting to a Laing DDC pump not included in the delivery. For this purpose, the pump is attached only by means of a fastening ring and four screws in the base of the expansion tank. Separately available mounting rubbers can also be screwed into the base of the AGBs to allow mounting on the PC case. Alternatively, the pump and expansion tank can also be attached via the mounting tabs of the pump in the PC case. The container itself is made of high-grade borosilicate glass, which, in contrast to the acrylic glass often used for tube expansion tanks, has a very high hardness and scratch resistance, a very low thermal expansion and excellent chemical and thermal resistance. The glass tube of this 100 ml version has an outside diameter of 50 mm and a wall thickness of 5 mm. The base and lid, however, are made of Delrin, each have two G1 / 4-inch ports and are connected inside the tube by a stainless steel rod. This version is additionally provided with a nano-coating, which allows water to simply roll off the inside of the glass tube. This creates a cool visual effect that enhances the entire reservoir. Note: Pump, connectors and decoupling rubbers are not included, please purchase separately. Technical details: Dimensions without pump: 62 x 62 x 132 mm (W x H x D)Dimensions with pump (not included): 88 x 62 x 147 mm (W x H x D)Diameter tube: 50 mmWall thickness: 5 mmMaterial: borosilicate glass (container), Delrin (base & lid), stainless steel (screws & connecting rod)Füllvolumen: 100 mlConnection thread: G1 / 4 inchesScope of delivery: 1x equalizing tank 2x screw plug G1 / 4 (pre-assembled) Four screws for fixing the pump
The aqualis DDC 100 ml reservoir from aqua computer is designed for direct mounting to a Laing DDC pump not included in the delivery. For this purpose, the pump is attached only by means of a fastening ring and four screws in the base of the expansion tank. Separately available mounting rubbers can also be screwed into the base of the AGBs to allow mounting on the PC case. Alternatively, the pump and expansion tank can also be attached via the mounting tabs of the pump in the PC case. The container itself is made of high-grade borosilicate glass, which, in contrast to the acrylic glass often used for tube expansion tanks, has a very high hardness and scratch resistance, a very low thermal expansion and excellent chemical and thermal resistance. The glass tube of this 100 ml version has an outside diameter of 50 mm and a wall thickness of 5 mm. The base and lid, however, are made of Delrin, each have two G1 / 4-inch ports and are connected inside the tube by a stainless steel rod. Note: Pump, connectors and decoupling rubbers are not included, please purchase separately. Technical details: Dimensions without pump: 62 x 62 x 132 mm (W x H x D)Dimensions with pump (not included): 88 x 62 x 147 mm (W x H x D)Diameter tube: 50 mmWall thickness: 5 mmMaterial: borosilicate glass (container), Delrin (base & lid), stainless steel (screws & connecting rod)Filling volume: 100 mlConnection thread: G1 / 4 inchesScope of delivery: 1x equalizing tank 2x screw plug G1 / 4 (pre-assembled) Four screws for fixing the pump
The HEATKILLER® Tube Series is a modular series of high end reservoirs with a glass tube made from borosilicate glass. It has some outstanding features which are listed here. Large filling mouthThanks to a large filling mouth and a bayonet catch lid the HEATKILLER® Tube Series reservoirs can be opened without any tools and is easy to fill. It has never been easier to re-fill a cooling medium. Borosilicate glass tubeBorosilicate is a glass with very high chemical and thermic resistance. It is scratch-resistant and has very low heat expansion. These outstanding features make borosilicate an ideal material for reservoirs. Three sizesTo account for different space availability in current cases, the HEATKILLER® Tube Series reservoir glass tubes are available in sizes 100mm, 150mm and 200mm. Three versionsBesides a standalone version, there are versions with direct connections for pumps. They support D5 and DDC pumps by Lowara (formerly known as Laing) and their derivatives. Large volumeIn designing the HEATKILLER® Tube Series, we took great care not to waste any of the available volume. That makes the HEATKILLER® Tube Series reservoirs very low maintenance, because they need fewer re-fills. Anti- Cyclone-effectThe exclusively developed anti-cyclone-inlay which is located at the bottom of the reservoir prevents vortices that easily form in reservoirs. This reduces noise levels and makes air bleeding easier. Streaming-optimized pump chambersThe pump adapter for D5 and DDC pumps comes with a streaming optimized pump chamber. This causes fewer vortices during use, which has a positive effect on both flow rate and air bleeding. Made in GermanyThe HEATKILLER@ Tube Series reservoirs are completely produced in Germany. Extensive optional accessoriesThe HEATKILLER@ Tube Series reservoirs have various optional features, for example: Variable Mounting systemsFor optimal integration into a water cooled system we offer different mounting systems to fit your build. …horizontal mount (pedestal)Two different height pedestals are available for mounting the HEATKILLER@ Tube Series reservoir to the case floor or free-standing. … vertical mountA multifunctional bracket mount offers options for vertical montage. Several adapters are available. Some can be used to attach the reservoir to 120x120mm or 140x140mm cooler slots. Others allow for a montage of the reservoir on a radiator from the MO-RA3 series. IlluminationHEATKILLER@ Tube Series reservoirs can be set in scene with LED illumination. We offer splash-safe LED strips in various colors. The strips are hidden in the struts of the reservoir cage. Colored strutsTo customize your HEATKILLER@ Tube Series you can exchange the default struts. We offer aluminum struts in natural color or with a choice of anodized colors. Technical data Material cover: POM Material struts: black anodized aluminium Tube: borosilicate glass Material bottom: POM Material Inlay: stainless steel Measurements (L x W x H): 70 x 70 x 148,5 mm Tube length: 100mm Tube diameter: 65mm Capacity: aprox. 250ml Weight: aprox. 640g Seal: NBR, VMQ Connection thread: 2x G ¼ inch (DIN ISO 228-1) Scope of delivery: 1x HEATKILLER® Tube 100 1x manual
Using the mount could not be easier. Just slide the mount onto the struts to the desired position and fix them in place using the lateral countersunk screws. The back of the mount has a M4 thread to screw the mount to the case wall. Vibration dampening montage is also possible. Decoupling modules are contained in the scope of delivery. With optional adapters the reservoir can be fixed into the mounting holes of 120x120mm or 140x140mm fans. This can attach the reservoir to a HTSF2 series radiator for example. We also offer an adapter to mount the reservoir to a radiator from the MO-RA3 series. Specifications: Material: POM (ACETAL) Color: black Included: 1x HEATKILLER® Tube - Basic Mounting Kit Mounting material
With the Alphacool Eisbaer LT, you get a high-performance compact water cooling system that’s barely inferior to its bigger brother, the Eisbaer AIO. Just like the Eisbaer, the Eisbaer LT distinguishes itself from the usual AIO mix in that Alphacool relied on normal custom components as much as possible during development. This allows the Eisbaer LT to be expanded on not just with the Eisbaer Ready quick connectors but also with connectors using standard G1/4” threads. These can be replaced with other models at any time. Another highlight is the new 25mm thin Slim Radiator, made entirely of copper. Since copper has twice the heat capacity of aluminium, optimal cooling is guaranteed. Cooler and pump The cooler bottom is made entirely of copper and has an ultra-fine cross slot structure. Thanks to those cross slots and a sophisticated nozzle system, heat is absorbed extremely fast and transferred away from the CPU. The built-in DC-LT Ultra Ceramic Low Noise pump is an extremely quiet pump that Alphacool has used in many products. The pump is much stronger than what you’d usually find in AIOs. It can also be throttled with the optional 7V adaptor, decreasing the already low noise generation even further. The pump casing is very flat and the aluminium cap gives it a clean, elegant look. Fittings Alphacool relies on the standard DIY fittings you’d find in any standard water cooling system. Components are made entirely of high-quality brass and use a G1/4” thread. This means fittings can be exchanged easily, just like in a standard system. Maybe you want different tubing or want to switch over to HardTubes – your options are wide open. Quick connectors The Eisbaer LT’s quick connectors make it compatible with all other Eisbaer Ready products, like the Eiswolf GPX-Pro cooler or the Eiswand external radiator. Both products use the same pump – perfect for quickly and easily expanding the cooling loop. Alternatively, you can use the Extension Set or Alphacool HF Quick Connectors (available separately) to integrate other components into the system. Tubing The compact but standard 11/8mm tubing size was Alphacool’s go-to here. The tubing uses anti-kink springs in order to prevent kinks in the tubing. This makes it easy to lay tubing even in tight spaces, meaning the Eisbaer LT is easy to install even in compact cases. Radiator Alphacool has integrated a brand-new 25mm-thin Ultra-Slim Radiator. Unlike most AIO systems, Alphacool’s radiator is not made of cheap aluminium, but rather high-quality copper. With twice the heat capacity, copper significantly increases the radiator’s cooling performance. This is especially noticeable when you reach the performance limits of a radiator. While temperatures in aluminium radiators progressively rise fairly early, copper radiators can keep the temperature stable for much longer. Fans The Eiswind fans were specially designed for use in radiators and provide very high static pressure to force cool air through the radiator’s cooling fins. Both fans can be regulated via PWM over an enormous range of 550 to 1700 RPM. A PWM Y-adapter is included with the Eisbaer LT, so both fans can be connected to a PWM connection on your motherboard or a separate fan controller. At first glance, the Eisbaer LT looks like a typical CPU AIO solution, but a closer look elevates the Eisbaer LT far above the competition. Thanks to its copper radiator and cooling block, its cooling power is enormous, and the quick connectors and custom water cooling components make it easy to expand on. On top of that, you have product options that can connect to the Eisbaer LT without needing to be refilled at all – such as external radiators, prefilled radiators, and graphics card coolers. The portfolio is constantly expanding. Technical Details Radiator Dual 120 mm Dimensions (LxWxH): 270 x 120 x 25 mm Material: 100% Copper Fans Eiswind 12 Bearing: Sleeve Bearing Voltage: 12V Power connector: 4-Pin PWM Rated speed (rpm): 550 -1700 (+/-10%) Fan efficiency: 63,85 cfm / 108m³/h Air pressure: 1,66 mm H2O Volume: 29 dB(A) CPU Cooler Dimensions (LxWxH): 69 x 69 x 39 mm Cooler bottom dimensions: 56 x 56 x 3 mm Cooler bottom material: Copper Threads: 3x G1/4" (Inlet, Outlet, Fillport) Pump DC-LT Ultra low noise Ceramic – 12V DC Rated speed (rpm): 2600 Voltage range: 7- 13,5V DC Power consumption: 4W Flow rate: 70L/h Maximum head: 0,85 m Power connection: 3-Pin Tubings Length: 32 cm, including anti-kink springs Diameter: 11/8 mm Material: PVC 2 quick connectors (LxW: 83 x 28 mm) pre-installed Compatibility AMD Socket AM2/AM2+/AM3/AM3+/ AM4/FM1/FM2/FM2+/C32/G34/754/939/940 Intel Socket LGA 755/1156/1155/1151/1150/1366/2011/2011-3/2066/604/771 Scope of Delivery 1x Alphacool Eisbaer LT240 CPU - black Manual Datasheet
The adapter from Bitspower in white has a G1/4 inch internal thread and a G1/4 inch external thread. Technical Data: Material: Brass Main Color: White Thread: 1x G1/4", 1x Inner G1/4" Thread Length: 5 mm
Alphacool is now the first manufacturer to offer a mini cooler for M.2 SSDs. This cooler provides passive cooling that ensures better performance power. Its original appearance also lets it fit seamlessly into any system. Everything needed for easy setup is included: thermal pads, clips, and two cooling plates. First, the thermal pads are placed onto the chips. Then, the cooling plates are placed on top of these and fastened with the clips. The slight height of the cooling plates ensures they aren’t in the way during installation, as well as letting them quickly dissipate heat! Technical Specifications: Material: aluminium Colour: black Cooling plate dimensions (LxWxH): 68.3 x 22 x 2 mm Scope of Delivery: 2x cooling plates 2x thermal pads 0.5mm 1x thermal pad 1mm 8x clips Mounting manual Notise: Not compatible to the following Mainboards: MSI x99s sli Plus
