The adapter in matt black from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Connection: 12 mm (OD) Thread: G1/4" Thread Length: 5 mm
The plug in white from Bitspower, can be screwed into a G1/4" internal thread for a certain time or permanently, e.g. to close radiators or equalizing tanks. Technical Data: Material: Brass Colour: White Thread: G1/4" Thread Length: 5 mm
The CORSAIR Hydro X Series XR5 140 mm Water Cooling Radiator delivers extreme custom cooling performance, with an 30 mm radiator thickness and premium copper core.
DEMCiflex Dust Filter 140mm White DF0689Toote kirjeldus inglise keeles:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution, which in this case is suitable for 140 mm fans. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Note:The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate. Technical details:Size (frame): 153 x 153 mmSize (filter): 129 x 129 mmCompatibility: 140 mm fan slotMaterial (filter): polyester meshColor: white (frame), white (filter)Mounting: magnetic bracket + mounting frameAdvantages: Fast installation No compatibility restriction Easy and quick cleaning Effective filter effect with high air permeability Durable fabric
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a white, straight adapter with two 1/4 inch external threads. Technical details:Material: MessingColor whiteConnections: male thread: 2x 1/4 inch
Adapter for mounting an expansion tank from the HEATKILLER® Tube series to mounting holes for fans in 140x140mm format. This allows the expansion tank to be attached to a radiator from the HTF4 series, for example. Please note that the basic bracket of the HEATKILLER® Tube series is also required. This is available separately. Technical data: Dimensions (LxWxH): 140 x 15 x 10 mm Material: POM (ACETAL) Color: Black Scope of delivery: 1x HEATKILLER® Tube - 140mm Fan Adapter (pair) Mounting material
Schwarzer Temperatursensor für Custom-Waküs, mit G1/4-Zoll-Innengewinde, inkl. Adapter auf G1/4-Zoll-Außengewinde, gängiger 2-Pin-Anschluss, voll vergossen und verzinkt
The connection for 16mm (AD) Hard Tubes from EK Water Blocks, is a compression fitting made of nickel-plated brass. It is kept in black and comes from the Torque series, which convinces with a simple and timeless design. Originally intended for the EKWB Quantum series, this fitting is also compatible with other EK products. In this fitting, the union nut serves as a compression ring, which presses the sealing ring onto the hard tube. It thus offers a higher level of safety and sealing than, for example, the fittings of the EK-HD series. As a small feature, the union nut has a recess under which coloured rings are placed, which provide a bit of individuality and are available separately. Technical Data: Material: Nickel-Plated Brass Colour: Black Supported Tube: 16 mm OD Thread: G1/4", male Thread Length: 4,5 mm Outer Diameter (Fitting): 24 mm Installed Height: 15 mm Compatible Solid Tubing: Acrylic, PETG, Copper, Brass, Stainless Steel
The transparent lid made of matt acrylic fits all Protium reservoirs from Singularity. It has four G1/4" connections and, due to its design, can be integrated into the water cooling circuit in a variety of ways. Technical Data Colour: Transparent Material: Acryl (matt) Thread: 4x G1/4" Compatibility: Protium reservoir
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a straight G1 / 4 inch screw connection for 16 / 13mm hoses (5/8 inch outside diameter - 1/2 inch inside diameter) with union nut in a matte black finish.Technical details:Material: MessingColor: matt blackConnections: Thread: G1 / 4 inch Hose: 16/13 mm
The adapter in carbon black from Bitspower has a G1/4" external thread and a G1/4" internal thread. It has an angle of 90 degrees. Technical Data: Material: Brass Colour: Carbon Black Angle: 90 ° Thread: G1/4" and inner G1/4" Thread : G1/4" Thread Length : 5 mm Thread : Inner G1/4" Thread Length : 6 mm
The adapter for 16mm (AD) Hard Tubes in matt black from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Connection: 16 mm (OD) Thread: G1/4" Thread Length: 5 mm
Technical Data: Material: Nickel-Plated Brass Colour: Black Supported Tube: 16/10 mm Thread: G1/4", male Thread Length: 4,5 mm Outer Diameter (Fitting): 23 mm Installed Height: 19 mm Compatible Soft Tubing: PVC, EPDM, Norprene, Silicone and most other flexible tubes
This matt black T-splitter from Bitspower is made of brass and has three G1/4" internal threads. For example, a branch can be easily integrated into the main line of the water cooling system. Technical Data: Material: Brass Colour: Matt Black Connections: 3x G1/4" female thread Thread length: 5 mm
The nickel-plated adapter from Bitspower in the colour shiny silver, has an angle of 90 degrees and two G1/4 inch internal threads, with rubber seals on both sides. Technical Data: Material: Nickel-Plated Brass Main Color: Shiny Silver Angle: 90° Thread: Inner G1/4" Thread Length: 6 mm
Verlängerungsadapter von Bitspower Touchaqua, G1/4 Zoll AG auf Link Tube, Female Adapter, längenverstellbar 16 bis 22 mm, 2er-Pack, Silber (Glorious Silver)
Full-Block-GPU-Kühler für Custom-Wasserkühlungen, für ASUS TUF GeForce RTX 3070-Grafikkarten, Deckel aus Acryl, Boden aus vernickeltem Kupfer, integrierte digitale RGB-Beleuchtung (3-Pin, 5VDG)
Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung
