With the Alphacool Eiszapfen you connect your hardtubes at the perfect 90° angle. The hardtube is tightly screwed to the union nut, seals immediately and can be easily loosened with one hand. Technical Details Width: 38mm Length: 38 mm Material: brass Color: Deep Black
The Alphacool Eiszapfen is a rotatable 8 mm offset fitting with one internal thread and one external thread that can be easily tied into any water circuit. Integration made easy The offset piece is very compact and can be integrated into any water cooling system thanks to its G1/4" internal and external threads. It is simply screwed onto the corresponding G1/4" connections at the desired position in the water circuit. Design The threads are 5mm deep and 5mm high respectively, thus enabling the very compact design. The offset piece can also be rotated 360°, which provides additional flexibility for integration even in the tightest cases. Coloured O-rings In addition to the standard black O-ring, 3 more O-rings in red, yellow and blue are included.Compatibility:G1/4" OT/IT threads Technical data L x W x H 24 x 22,5 x 18,5mm Material brass Offset 8mm Threads G1/4" IT, G1/4" OT Thread depth 5mm Thread height 5mm Weight 28g Color chrome
The new Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details: Material: brass Colour: Deep Black Diameter: 22 mm Height: 20 mm Thread: G1/4" Thread length: 5 mm HardTube size: 13 mm Compatibility: PETG, acrylic, brass and glass tubes Weight: 0,023 kg Scope of supply: 1x Alphacool Eiszapfen PRO 13mm HardTube Fitting G1/4 - Deep Black
The new Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details: Material: brass Colour: Deep Black Diameter: 26 mm Height: 23 mm Thread: G1/4" Thread length: 5 mm HardTube size: 16 mm Compatibility: PETG, acrylic, brass and glass tubes Weight: 0,042 kg Scope of supply: 1x Alphacool Eiszapfen PRO 16 mm HardTube Fitting G1/4 - Deep Black
The HardTube project has become a reality. Alphacool is breaking new ground and setting a new standard!Up till now, the most commonly used method for connecting water cooling systems was normal PVC tubing - but now, Alphacool is offering another way to set up your system. HardTubes provide more organisation for a system, giving it a distinctly more structured appearance. Available now are the brand-new brass tubes, in black chrome and chrome. With the corresponding connectors and their easy functionality, these tubes can be linked or sealed together for an absolutely leak-proof fit. The plexiglass tubes can be fitted into a system easily with the right bending tools, without requiring extra angled pieces. The tubes must be cut to the right length in order to fit into the system. The following options are available:HardTube 13/10mm Clear Plexi 20cm, 40cm, 60cm and 80cmHardTube 13/10mm brass chrome 20cm and 40cmHardTube 13/10mm brass black chrome 20cm and 40cmHardTube 16/12mm Clear Plexi 20cm, 40cm, 60cm and 80cmHardTube 13/10mm 90° Plexi 10/30cm, 20/40HardTube 16/13mm 90° Plexi 10/30cm, 20/40Reviews:MNPCTech.comNote: Due to the made-to-fit pipes, some effort is required to plug the connections in straight.Scope of delivery:1x Alphacool HardTube 13/10mm 90° Plexi (PMMA) 20/40cm Note: not compatible with Monsoon fittings
Alphacool's new quick couplers with the name "Eiszapfen" are the next block in the "Eis" series. High quality and impressive features makes any watercooling system back to a piece of high-quality and practical! A quick coupling is used everywhere where expandability, flexibility and cleanness play an important role. These compact couplings have a 1/4 "thread on both sides with which they are compatible with all standard connections. By pulling down the outer ring these couplings can be disconnected. Both sides close immediately completely tight so that no water can escape. Thanks to the special N.D.S.L. Technology (no drip, no splash, no leak) a leak, drip or splash out of the water on opening the lock is excluded. By assembling again, both sides must click into each other audibly and shut themselves tightly by a double O-ring, which is simply compressed when plugged together.Likewise, the mechanism was designed for durability to ensure a secure connection even years. Many quick couplings usually also affect the flow rate. But Alphacool has found a way to resolve this issue. A high flow rate is maintained at these quick couplings! Alphacools quick couplers are available in two finishes. In deep black and fully chromed these add seamlessly on every system. Technical Details: Dimensions (L x D): 64,6 x 23,9mm Material: Brass Colour: Deep Black Thread: 2x 1/4" internal thread Scope of Delivery: 1x Alphacool Eiszapfen quick release connector kit G1/4 inner thread - Deep Black
The Low Profile ES L-connector from Alphacool's ENTERPRISE SOLUTIONS series with 1 G1/4" male thread and 1 G1/4" female thread offers the possibility to connect components like GPU and CPU coolers, reservoirs or radiators into a water circuit even in the tightest server case.UseThe Low Profile ES L-connector can be rotated 360°. Compared to Alphacool's conventional L-connectors, rotation is not made possible by turning the connector itself, but by a recessed, freely rotatable plug with a screw slot on the threaded opposite side of the connector. With the help of a screwdriver or the plug-in tool from Alphacool, the integration of water cooling elements is simplified, as the connector itself no longer needs to be rotated. The positioning of the connector is done using the adjustment options on the plug itself. This is particularly advantageous in tight server housings with little space available. The position of the Low Profile ES L connector can also be easily adjusted or changed later on in this way.VariantsThe Low Profile ES L connector is available in either brilliant chrome or matt black. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Replacement O-rings in three different colours are included. Technical dataMaterialbrassL x W x H31 x 23,5 x 18,5mmThreads1x G1/4" OT | 1x G1/4" ITThread lengthsOT 3,5mm, IT 5mmPossible rotation360°Version90° angledWeight65gColorblack
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:Beside classical fittings, barb fittings are another way to connect hoses with fittings. They are much more compact then classical fitting so that you can see more of the tube.. Very popular in Casemoddingsystems!This fittings has a 90° kink and is pivoted. That´s important for an easy tubing of the system. Extreme Highflow:In difference to other fittings this barb fittings have a bigger inner! This fitting is unique in the Watercoolingscene because of his 10mm outerdiameter with 8mm fitting innerdiameter. Technical specifications: Material: Brass, chromeColor: Deep Black Dimensions:Height: 22mmWidth: 35mmDepth: 17mmHose Size: 10mm IDFitting Inner Diameter: 8mm Extent of delivery:1 x Alphacool HF 10mm (3/8") Schlauchanschluss 90° drehbar G1/4 mit O-Ring - Deep Black This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)
Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is.A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable!The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport.Model: 90° compression fitting 13mmThis fitting has a 1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 90° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical dataDimensions (L x W)42.5 x 21.00mmMaterialbrassThreadsG1/4" OT | 13mm (OD 1/2")Thread length5mmPossible rotation360°Version90° angledColorwhite
The cuplex kryos NEXT sTRX4 FC from Aqua Computer, with its nickel-plated copper base - as already mentioned in the name (FC = Full Cover) - covers the entire processor. The huge cooling structure has the finest structure size that Aqua Computer has to offer. The ingenious mounting system makes the installation look very easy. The retractable springs and screws with a defined stop ensure an even contact pressure on the processor. Thanks to the heat conducting paste of Thermal Grizzly, the assembly is efficiently rounded off. Technical Data Dimensions: 117 x 77 x 16 mm (without screws) Base material: Copper, nickel-plated Case material: Acetal, black Threads: G1/4" Distance between threads: 69 mm Scope of Delivery: Mounting material (screws and springs), Thermal Grizzly Kryonaut (1 gram), Plastic spatula, Instruction manual
High-End CPU-Wasserkühler von aqua computer, transparentes Acrylgehäuse, vernickelter Kupferboden, für AMD Sockel TR4/STRX4, mit Thermal Grizzly Kryonaut Wärmeleitpaste
The Alphacool Apex aluminium backplate is specially designed for the Intel LGA Socket 1700 to optimise the cooling performance of the Alphacool Eisbaer AIOs and XPX coolers. The backplate replaces the standard Intel CPU mount on the back of the motherboard and prevents the LGA 1700 socket from bending when mounting the cooler. This serves to protect the mainboard and enables an even and perfect contact pressure for all Alphacool XPX CPU water coolers, Eisbaer AIOs and their Solo variants. All in all, this leads to a significant improvement in cooling performance.Compatibility:- Alphacool Eisbaer (Solo & AIO)- Alphacool Eisbaer Aurora (Solo & AIO)- Alphacool Eisbaer LT (Solo & AIO)- Alphacool Eisbaer LT Aurora (Solo & AIO)- Alphacool Eisbaer Pro (Solo & AIO)- Alphacool Eisblock XPX- Alphacool Eisblock XPX 1U- Alphacool Eisblock XPX Pro 1U- Alphacool Eisblock XPX Aurora- Alphacool Eisblock XPX Aurora Edge- Alphacool Eisblock XPX Aurora Pro- Alphacool Eisblock XPX Pro Aurora Light Technical data L x W x H 86 x 86 x 5 mm Material aluminium Weight 67 g Color black
Alphacool's Eiszapfen is the high-end version of the already proven connectors and meets all the requirements placed on a connector with its high-flow, shape, processing and colour. Compatibility This slim adapter extends a ¼” thread by 10mm. This is mainly useful where a ¼” track is hard to reach or sits too far in. Design With brilliant chrome, deep matt black and decent matt white, three colour variants are available that fit perfectly into any system. Thanks to special processes, the coatings are firmly bonded to the substrate. This ensures a high longevity of the colours and prevents the coating from flaking off. Technical details Material Brass Colour White Height 10 mm Thread G1/4“ Thread length 5 mm Diameter 18 mm Weight 12 g Download Datasheet PDF: Alphacool Eiszapfen extension G1/4 outer thread to G1/4 inner thread - White Fitting Map: You can find an interactive map of all Alphacool fittings here.
EK Water Blocks EK-Quantum Surface S360 - Black At just 30mm thick, the EK-Quantum S-Series surface radiators are ideal for cases with limited space. Despite the reduced thickness, they deliver exceptional performance at very low and medium fan speeds. A total of 16 2mm wide copper tubes along the entire length of the radiator ensure optimal coolant flow and do not burden your cooling loop. High-quality finless copper fins with a density of 20 FPI offer the best balance between heat transfer and air resistance for optimal performance even at low speed fan operation. EK would not recommend a push/pull setup on an EK-Quantum S-Series surface radiator as it does not provide a proportional increase in performance. If more cooling power is needed, installing additional radiators is a good option. New and improved The EK-Quantum Surface S Series cooler maximizes performance by using a new cooler core. When comparing core-to-core performance, the Surface S cooler performs up to 20% better than its predecessor, the CoolStream SE, due to its improved fin structure and optimized core. EK-Quantum Surface Premium radiators are based on years of development and market research to deliver the best product in every respect that the market demands. The processing of the materials, the mechanical rigidity and the performance have been taken to a new level. Like all other products in the Quantum Line, EK's brand new surface coolers offer numerous performance improvements, including thermal performance, coolant flow restriction and airflow restriction. With the included screws, this cooler is compatible with 120mm fans, which have a thickness of 25mm as standard. EK recommends using EK fans or similar with sealed frames. This classic but effective square shape of the fan housing ensures optimal performance in pull (suction) or push (pressure) mode without hydraulic losses, ensuring the optimal cooling performance of your liquid coolers. Thick extruded aluminum end caps with a contrasting silver finish give the cooler a premium look and feel. They cover the interior and connect the stamped side panels, creating a sturdy structure that is comfortable to handle. The stainless steel side panels are coated with durable semi-gloss black paint, while the fins themselves feature a special black matte coating with a high thermal conductivity coefficient. M4 screws – standardized, easy to find Heavy-duty black M4 Philips round head screws are included for ease of use. In general usage scenarios, EK strongly recommends using only the included screws to avoid damage to the cooler itself. However, the M4 screw compatibility allows users to source longer screws if needed. The cooler core is designed in such a way that even if the customer accidentally uses longer screws, it will not affect the structural integrity of the cooler core as they will only collide with the fins. Easy disassembly – DIY modding dream The EK Quantum Surface range has been designed and engineered as a modular product range rather than individually sized radiators. Such a design ensures a flawless fit and continuity in appearance while making the disassembly process very simple and straightforward. EK has always supported the DIY modding community, so painting and modifying your Surface radiator is a breeze. Loop friendly – Don’t worry about your pump The internal structure of the coolers has been designed with low flow restriction so as not to place unnecessary strain on the rest of the cooling loop. This means that you can add multiple radiators to your cooling loop using just a single pump (D5 or DDC). The coolers are also airflow friendly and low restriction, allowing operation at lower fan speeds while maintaining the same performance. Low airflow restriction ensures that the case is well ventilated and other radiators in the case can breathe properly. EK-Matrix7 compatible – for the cleanest pipe runs Since each custom liquid cooling loop is made up of multiple EK products, the most valuable difference in terms of aesthetics and usability comes from the sum of all the parts. To address this problem, EK launched Matrix7, a system that standardizes product dimensions and connector location and spacing. This way, we make liquid cooling loop assembly more intuitive and ensure a clean set of parallel pipe runs easier than ever before. All EK-Quantum Surface emitters are EK-Matrix7 compatible, meaning they integrate effortlessly with Reflection², the second generation of Quantum distribution panels. This allows the user to easily swap and upgrade between S-, P- and X-series surface emitters within the same enclosure (provided the enclosure supports thicker emitters in the same position). The EK-Quantum Surface S cooler wins TechPowerUp's Editor's Choice award The EK-Quantum Surface S radiators have been awarded the Editor's Choice award by TechPowerUp. They praise this product and list the following benefits among others: good value for money, increased case compatibility, excellent thermal performance for the form factor, little restriction of coolant flow, two color options to choose from, modifiable with replacement cover plates and so on. "I will happily recommend the EK-Quantum Surface S," says the reviewer, "and look forward to trying out the rest of the EK-Quantum Surface cooler series!" Technical and material specifications: High-quality fins made of 99.9% copper Copper H90 pipes End tank chambers made of brass H62 Stainless steel side panels End caps made of extruded aluminium, silver anodised Brass nickel-plated adapters and plugs Dimensions: 405 x 130 x 30 mm (L x W x H) Weight: 0.95kg FPI: 20 Connection thread: 2x G1/4 inch Fan compatibility: 120 x 120 x 25 mm fan Pressure tested: 1 bar Attached: EK-Quantum Surface S-Series Coolers 12 x M4 x 30 mm for 25 mm thick fans 12 x M4 x 5 mm for direct mounting of the cooler to the case. Designed and engineered in Slovenia, manufactured in China.
Grafikdisplay von aqua computer, OLED-Display zur Anzeige von Informationen, mit vier Tasten ausgestattet, externe USB-Typ-A-Schnittstelle, integrierter Umgebungstemperatursensor, Inforarot-Empfänger, Clip-Standfuß enthalten
GPU-Wasserkühler im Full-Block-Design, für verschiedene RTX-Grafikkarten von NVIDIA, vernickelter Kupferblock mit Acrylglas-Deckel, integrierte A-RGB-Beleuchtung
GPU-Wasserkühler im Full-Block-Design, für verschiedene RTX-Grafikkarten von NVIDIA, vernickelter Kupferblock mit Acrylglas-Deckel, integrierte A-RGB-Beleuchtung
