Low-Noise-Pumpe von Alphacool und Laing, Silbernes Messing-Gehäuse (Silver Nickel), 200 l/h und 2,44 m Förderhöhe bei 10 Watt Leistungsaufnahme, Single Edition ohne Aufsatz
Hochwertiges Reservoir aus stabilem Nylon von Alphacool, mit Montageplatz für DDC-Pumpe, 250 ml Füllvolumen und flexible Montage, Vorbereitung für LEDs und beleuchtetes Logo, insgesamt vier Port-Öffnungen
The new Alphacool Eisblock XPX Aurora Edge CPU water cooler offers fantastic performance thanks to the patented ramp design as well as boasting excellent quality. The new Aurora design in combination with the addressable digital RGB illumination offers many possibilities for outstanding illumination of the CPU water block. Performance in abundance! Alphacool already developed and patented new flow technology for the first Alphacool Eisblock XPX series. The so-called "ramp system" ensures an even flow of water inside the cooler and sits in front of the diffuser plate. This ensures that the water is pressed evenly through the diffuser plate, which in turn pushes the water evenly over the cooling base. The cooling channels on the CPU cooler base has also been enlarged to a proud 34 x 32 mm to accommodate the ever-growing CPU DIEs. This is especially true for multi-core processors with 4, 6, 8 or even 12 and more CPU cores. So that the heat from the CPU can be transferred to the water as quickly as possible. 81 cooling fins can be found on the cooling plate to ensure maximum heat diffusion. The fin structure has been reduced to just 0.2 mm in order to create the largest possible surface area in the smallest possible space. And the lighting? All new Eisblock XPX Aurora Edge CPU waterblocks come with addressable digital RGB lighting. The aRGB LEDs are integrated directly into the CPU water cooler and run once around the entire cooling block. With up to 15 digital RGB LEDs the entire CPU block is evenly and intensively lit. Of course, the brightness can be controlled by an appropriate controller. And as with all aRGB LED products all known effects can be created. From simple colour changes to wave effects and rainbow lighting, everything is possible. Of course, the Alphacool Eisblock Aurora coolers can also be connected and controlled via mainboards using the standard 3-pin 5V connector. The cable also has an integrated Y-adapter. This makes it easy to connect further Alphacool Aurora products in series without having to order separate Y-adapters. Extension cables may be needed if you want to connect the products in series, depending on the size of the case. Is installation difficult? Mounting the XPX Aurora Edge Eisblock cooler is simple. The backplate is simply attached to the mainboard from behind. The mounting frame for the AMD or Intel socket is clamped to the cooler and the corresponding mounting screws are pre-attached to this frame. Next, you simply apply thermal paste and you attach the cooler using the screws. Please note: Remove the protective foil on the cooler base before use! Unique Aurora Design The Alphacool Eisblock Aurora Edge has been significantly changed in some points to its predecessor, the Eisblock XPX. The lower part of the cooler is completely made of brass and no longer of plexiglass or transparent nylon. This changes the overall feel and quality of the cooler. Not only is it heavier in the hand, but it is also much more stable than the usual Plexi CPU water coolers. In order to stand out visually from the normal Eisblock XPX Aurora CPU water cooler, the bottom of the cooler was kept completely in black. This emphasizes the visual effect of the water flow. The corners of the CPU cooler are more angular, which makes the cooler stand out from the normal Aurora Plexi Eisblock. Technical details Dimensions (WxTxH): 70 x 70 x 32,5 mm Net weight: 407 g Max working temperature: 60 °C Material cooler: nickel plated copper Material bottom part: brass Material top: Plexi Threads: 2 x G1/4“ Power supply Digital RGB: 3-Pin 5V Pressure tested: 1,5 Bar Certificates: CE, FC, ROHS Download manual PDF: Alphacool Eisblock XPX Aurora Edge - Plexi Black Digital RGB Download data sheet PDF: Alphacool Eisblock XPX Aurora Edge - Plexi Black Digital RGB
Dimensions 140x140x25mm, Revolutions 550-1250rpm, Air throughput 85.29m³ / h, Air pressure 1.40mmH₂O, Volume 26dB (A), Fan bearing hydrodynamic plain bearing, Voltage range 6-13.2V, Power consumption 3.96W, Connection 4-pin PWM, 4-pin Corsair RGB, RGB lighting (34 LEDs), Special features LED control, CO-9050106-WW
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Extension 20mmThis slim adapter extends a ¼” thread by 20mm. This is mainly useful where a ¼” track is hard to reach or sits too far in. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Length: 20mm Diameter: 18mm Scope of Delivery: 1x Alphacool Eiszapfen extension 20mm G1/4 outer thread to G1/4 inner thread - deep black
EK-Quantum Magnitude Accent - Red is an interchangeable inner aesthetic frame for EK's new Magnitude water block. This red accent is best used on Magnitude water blocks with translucent tops where the LED’s shine inwards, or for those without LED implementation. This Magnitude accent is made of anodized aluminum. Available in several different colors and materials, these accent frames are compatible only with EK-Quantum Magnitude CPU water blocks Made in Europe - Slovenia!
The Alphacool Helix Eisbecher captivates with its unique Helix Optic, including elegant aluminium caps for its upper and bottom sides. The 60mm diameter version also offers a UV cathode tube to illuminate UV-reactive water from within. Highlights Helix Optic Four colour combinations Two diameter sizes - 50mm and 60mm 60mm version comes with UV cathode tube The Alphacool Eisbecher Helix 250 is the optical highlight of the Eisbecher family. The helix inside the reservoir gives off a unique effect reminiscent of a strand of DNA, making it a real eye-catcher. In the middle of the reservoir is a UV cathode tube powered over a 4-pin plug. If UV-reactive water is used, the cathode tube will create a strong glow from the inside of the reservoir, making for a unique effect that really impresses. The base and top are made entirely of acetal, but are covered with aluminium caps for an elegant look. The aluminium caps do not come in contact with the water, of course. The installation options are considerable, with three G1/4 threads in both the bottom and top. The bottom also has two extra G1/4 connection points. This gives you lots of options for positioning your reservoir. You'll also receive two different installation sets. One of them is well-known from the Eisbecher series - the aluminium brackets that lock flush with the top and bottom of the Eisbecher and provide the option of mounting on a radiator. This requires a 240 or 280mm radiator or a larger equivalent, such as a 360 or 420mm. The alternative installation set is a clip bracket, made up of two clips which are fastened to the case with one screw each. The Eisbecher Helix just needs to be clipped on, giving you lots of flexibility in how you mount it. The Eisbecher Helix is available in multiple colour combinations. The cap, bottom, and the helix itself can all be different colours. Technical Specifications Dimensions (HxD): 250 x 65mm Connection threads: 8x G1/4" Helix colour / aluminium caps: red / red UV cathode colour: UV Cable length: ca. 27cm Capacity: 340ml Scope of Delivery 1x Alphacool Eisbecher Helix 250mm Reservoir - red 1x UV cathode 1x Adapter 2x Aluminium brackets - Eisbecher series 2x Bracket clips - black Assembly materials 6x Locking screws Datasheet Installation Manual Download 3D-file (.stp)
The Thermaltake Pacific HardTube 45° Connector 12mm OD - Black is made of black coloured copper and is especially used for 12mm outer diameter PETG Hardtubes. This way 45° angles can be formed for the cooling circuit.
The revolution in fitting design! It simplifies the installation of your water cooling system and offers a closure that surpasses anything you've ever seen before. Equipped with 4 pre-installed O-rings.
With the Thermaltake Pacific Compression Series, you get a complete solution for enthusiasts and custom PC manufacturers that meets the requirements of building and installing a complete water cooling system. With durable G1/4" copper fittings coated with chrome, every detail is taken seriously. Only compatible with PETG Tube 5/8" (16mm) OD to make your system a showcase for everyone with Thermaltake's high quality components.
Thermaltake's Pure A12 is a PWM controlled LED fan that comes in four different colours: blue, green, red and white. Especially radiators benefit from the very quiet operation and low heat generation thanks to the self-lubricating hydraulic bearing. The anti-vibration pads also ensure low noise levels. As the sealing cap prevents the lubricant from escaping, a long service life is also guaranteed. The nine LEDs of the fan impress with a uniform brightness and high colour intensity and give the PC system the final touch. Technical Data: LED colour: Red Dimenson: 120 x 120 x 25 mm Interface: 4-Pin PWM Fan Stated Voltage: 9.0 V Fan Rated Voltage: 12 V Rated current: 0.15 A Power Input: 1.8 W Fan Speed: 500 - 1500 rpm Max. Air Pressure: 1.59 mm-H2O Max Air Flow: 56.45 CFM Noise: 25.8 dB-A Bearing Type: Hydraulic Bearing Life Expectation: 40,000 hrs, 25℃ Weight: 156 g
Thermaltake's Riing Quad 14 RGB is a PWM controlled fan with a quadruple 16.8 million colour LED ring. Due to the self-lubricating hydraulic bearing, the fan benefits from very quiet operation and low heat generation. As the sealing cap prevents lubricant leakage, a long service life is also guaranteed. The design of the fan is based on performance, which is why it features high static pressure and efficient cooling. The anti-vibration pads also ensure low noise levels. The four independent LED rings, with over 54 addressable LEDs in total, provide impressive light coverage and high colour intensity. The extensive and breathtaking effects add the finishing touches to your housing and give it a unique look. As other controllers (also from Thermaltake) are not compatible with the fans, the 3-piece set includes a separate controller. It is recommended to connect only 5 Riing Trio fans per controller (connected with a Molex cable). If you own a lot of Thermaltake RGB PLUS products, you can really let off steam with the TT RGB PLUS software. Whether you want to synchronise the lighting in games, movies and music or specific lighting modes, colours and speeds, the software will make your system really shine. In addition, the software can also regulate fan speeds, for example, and also offers the option of voice control. With Thermaltake's NeonMaker software, the possibilities are even extended to create incredible and dynamic light shows. Furthermore, all Thermaltake TT RGB PLUS products are compatible with Razer chroma lighting and Amazon Alexa. Technical Data: Dimenson: 140 x 140 x 25 mm Interface: USB 2.0 connectors (9 Pin) Fan Stated Voltage: 9.0 V Fan Rated Voltage: 12 V and 5 V Rated current: 12V - 0.12 A , 5V - 0.9 A Power Input: 12V - 4.32 W, 5V - 13.5 W Fan Speed: 500 - 1400 rpm Max. Air Pressure: 1.71 mm-H2O Max Air Flow: 60.17 CFM Noise: 26.1 dB-A Bearing Type: Hydraulic Bearing Life Expectation: 40,000 hrs, 25℃ Weight: 238 g
The Alphacool Eiswolf 120 GPX-Pro is the first prefilled water cooler for graphics cards with an integrated pump. Alphacool developed a completely new pump design to minimize the pump's volume and increase performance, and the suction pump was born. Through its suction principle, less turbulence is created in the water, allowing for a more even flow. This also makes the pump nearly inaudible - a first in the AIO market. Naturally, the cooler comes with a backplate that is directly attached to the cooler after installation, ensuring better heat transfer and distribution. This significantly improves the cooling performance. Additionally, it offers an aesthetic improvement in that the graphics card PCB is barely visible from the side. All that remains is a slight opening for the electrical connection and SLI/CrossFire Connector, of course. The hoses and connectors are also based on standard water cooling components. The hose is encased in anti-kink springs and comes in the 11/8mm size. The connectors have standard G1/4" threads and can therefore be exchanged for any other model or size desired. The two quick-release fasteners allow the cooler to fit easily into any cooling loop. If you are using the Alphacool Eisbaer CPU AIO water cooler, you can easily connect it with the Eiswolf 120 GPX-Pro using the quick-release fasteners. Using the Eisbaer gives you a redundant system, as you have two pumps in the loop. In the unlikely event that one pump fails, the other can still support the cooling loop. This is security at its highest level. Graphics card not included Compatibility MSI GeForce GTX 1080 Ti Armor 11G OC, 11GB GDDR5X, DVI, 2x HDMI, 2x DisplayPort (V360-010R) MSI GeForce GTX 1080 Ti Sea Hawk EK X 11GB GDDR5X (360-037R) MSI GeForce GTX 1080 Ti Gaming X 11G 11GB GDDR5X (V360-001R) MSI GeForce GTX 1080 Ti Gaming 11G 11GB GDDR5X MSI GeForce GTX 1080 Ti DUKE 11G OC 11GB GDDR5X MSI GeForce GTX 1080 Ti DUKE 11G 11GB GDDR5X MSI GeForce GTX 1080 Ti Armor 11G 11GB GDDR5X Scope of Delivery 1x Alphacool Eiswolf 120 GPX Pro Nvidia Geforce GTX 1080Ti M16 - black Configurator for VGA cooler Manual available for download here Compatibility list Nvidia Eiswolf Brochure
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®. (Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316 , Dremel® - Art.No: 32196 and 32229 ) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 90° 20/40cm WARNING: Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention: This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
Fan speed (max): 2000 Fan speed (min): 500 Air flow rates: 73.11 Number of fans: 1 Noise: 36 Dimensions: Radiator length 152 mm Radiator width 120 mm Radiator height 32 mm Pump length 66 mm Pump width 66 mm Pump height 43 mm Other features: Static pressure 2.93 InchH2O Rated voltage 12 VDC Material Plastic, Nylon, Copper, Rubber, Aluminium Noise level 21 - 36 dB Bearing type FDB(Fluid Dynamic Bearing) Lifetime 60 000 h Fan diameter 120 mm Illumination Yes Connectors 4-PIN, 3-PIN Illumination color RGB Backlight parts Pump Fan lifetime 60000 h
Paper/Pasteboard: 1387.00 g Embeeded battery: No Gross depth (mm): 140.00 mm Gross height (mm): 40.00 mm Gross weight: 0.28 kg Gross width (mm): 240.00 mm Net weight: 0.18 kg Packing quantity: 1.00 pc(s) Tare weight (kg): 0.10 kg Volume (m3): 0.00 m³ Producer product name: Prisma Digital RGB Square fan 140mm Plastic (No PET): 27.00 g WEEE tax: No
