Wireless fire detector with smoke, temperature, and CO sensors. Built-in non-replaceable lithium batteries, up to 10 years of battery life. FireProtect 2 is a next-gen device designed for instant fire detection. The unique smoke chamber does not require regular cleaning, the dual-spectrum sensor distinguishes smoke from steam, the thermistor quickly reacts to the synthetic materials burning, and sophisticated software minimizes false alarms. Everything meets the most modern fire safety standards. Thought-out design, mounting, and the in-app settings make installation straightforward and quick. Detector Type Fire Wireless, Operating temperature range 0°C to +50°C Power supply requirements 2 non-replaceable lithium batteries, Colour White Dimensions 123.7 × 123.7 × 44.7 mm
Suitsuanduri olemasolu on Eesti kodudes kohustuslik! Suitsuandur peab olema paigaldatud iga elamu või korteri vähemalt ühte ruumi. Tänu integreeritud liitiumakule kestab suitsuandur kuni 10 aastat. Kaasas juhised paigaldamiseks. Lihtne paigaldada Ei vaja kaableid Korpusel LED-indikaator Integreeritud liitiumaku Testitud vastavalt standardile EN14604
Detector Type Fire/Special|Operating temperature range -10 C+55 C|Power supply requirements 12 V DC|Current drain 24 mA|Dimensions 108 x 61 mm Detector Type Fire/Special Operating temperature range -10 C+55 C Power supply requirements 12 V DC Current drain 24 mA Dimensions 108 x 61 mm Shipping box quantity 1 Unit Brutto Volume 0,001008 cubm Unit Net Weight 0,164 kg Unit Gross Weight 0,2 kg
The intelligent and precise smoke detector will take care of your and your family´s safety. When the alarm detects smoke, it will automatically sound a warning tone. If, on the other hand, you are using several alarms at the same time, all you need to do is let one of them catch smoke and all the available devices will activate. In addition to smoke detection, it can also detect overheating, and thanks to its compatibility with the HUB, available for purchase separately, you can combine the device into a single system. A dedicated Meross app or Apple Home app allows you to control the sensors and receive alerts in case of an emergency. The sensor is CE EN14604 worthy, making it a fully safe tool for you and your family. The volume level is 85dB, which will not cause hearing damage. In addition, if you have more alarms and only one of them detects smoke, the rest will also sound. You will also be notified of the threat through the app. You don´t have to worry about the sensor draining quickly. The entire device requires only 2 AA batteries, which are readily available in case you need to replace them. The only thing the sensor requires from you is a memory to know when you last replaced the batteries. A spare set is included. The device uses special apps - Meross or Apple Home. With the help of which, you can control up to 16-devices, set triggers to control other Meross devices, or receive alerts when an emergency happens. The hardware is compatible with SmartThings and works with Apple HomeKit. You can also combine the device into a single system thanks to the available HUB, which allows you to connect 16 devices simultaneously. This will give you control and security over your entire home. That´s not the end of the GS559AH´s advantages, the device will also detect overheating and effectively inform you about it. When the temperature exceeds 54 - 70 ℃, the Meross smoke detector will trigger an alarm signal. You will not be threatened by anything! Included: Alarm 2 × expansion bolt 2 × AA 1.5 V batteries power adapter USB cable smart hub CE DOC
Elegant, slim enclosure is made of high quality plastic. Uniform appearance of all detectors installed in the premises makes it difficult for an intruder to identify the specific model used in the system because all of them look the same. compliance with EN 50131 Grade 2 configuring operating parameters: potentiometers end-of-line resistors - 1.1 k? 4 available LED indicator colors pet immunity function up to 20 Kg Detector Type Motion Detection technology PIR, Detecting area 12 m x 13 m, 90° Operating temperature range -10°C...+55°C, Power supply requirements 12 V DC Dimensions 62 x 137 x 42mm
Netatmo tark vingugaasiandur aitab kaitsta Sinu kodu ning selle elanikke. Kui seade tuvastab muidu märkamatu vingugaasi, siis saadab ta reaalajas Sinu nutitelefonile selle kohta ohusignaali. See võib päästa Sinu või Su lähedase elu! Anduril on sisseehitatud alarm (85 db sireen), 10 aastane aku vastupidavus ja LED indikaator. Suitsuandur toetab 2,4 Ghz WiFi ja Bluetooth Low Energy (BLE) tehnoloogiat. Netatmo toetab Apple HomeKit!
Carbon monoxide detector•digital signal analysis•optical and acoustical indication of threshold concentration detection•low current consumption•full autodiagnostics•red LED indicator
Volume: 85 Environment requirements: - Temp. -10 ° C ~ 50 ° C Dimensions: 107 x 35 mm Other features: - Sensor: photoelectric- Sensor life: 10 years- Power consumption (standby): 8μA- Current (alarm): 10mA
Elegant, slim enclosure is made of high quality plastic. Uniform appearance of all detectors installed in the premises makes it difficult for an intruder to identify the specific model used in the system because all of them look the same. compliance with EN 50131 Grade 2 configuring operating parameters: potentiometers end-of-line resistors - 1.1 k? 4 available LED indicator colors Detector Type Motion Detection technology PIR, Detecting area 15 m x 20 m, 90° Operating temperature range -10°C...+55°C, Power supply requirements 12 V DC Dimensions 62 x 137 x 42mm
- 2-YEAR BATTERY LIFE: One battery provides monitoring for 730 days. - FOR DOORS AND WINDOWS: Small and compact design fits onto any door or window frame. - 100-DECIBEL SIREN: If a forced entry is detected, a siren as loud as a jackhammer will be triggered on HomeBase, and you’ll be notified instantly on your smartphone. - EASY INSTALLATION: Just peel off the mounting tape and stick the sensor onto the door or window you want to monitor. Detector Type Magnetic contact Colour White
Elegant, slim enclosure is made of high quality plastic. Uniform appearance of all detectors installed in the premises makes it difficult for an intruder to identify the specific model used in the system because all of them look the same. - compliance with EN 50131 Grade 3 - configuring operating parameters: buttons and keyfob - end-of-line resistors - 1.1 k? - end-of-line resistors - 4.7 k?, 5.6 k? - plug-in terminal block - electronics board protecting cover - number of available LED indicator colors: 7 - active IR anti-masking - creep zone protection Detector Type Motion Detection technology PIR, Detecting area 20 m x 24 m Alarm output 40 mA / 24 V DC, Maximum current 85 mA Operating temperature range -10°C...+55°C, Power supply requirements 12 V DC Dimensions 62 x 137 x 42 mm
K7CO carbon monoxide sensor equipped with a Kidde electrochemical sensor, guaranteeing 10 years of operation. Battery power supply allows the detector to be mounted in an optimal place in the room and provides protection also in the event of a power failure in the network. Exceeding the permissible CO level is signaled optically (red LED) and acoustically (loud, pulsating sound alarm with a strength of 85dB). The device's memory stores information about the detection of CO concentration exceeding the level of 100 PPM. Thanks to this, the user can make sure that there is no emission of carbon monoxide during his absence in the room. The sensor has a test / reset button that allows you to check the operation of the device and reset the alarm signal. The efficiency control system monitors on an ongoing basis, among others: the sensor, internal circuits and the state of the battery. In the event of a malfunction or low battery level, the yellow LED flashes and an audible warning sounds. In addition, the sensor is equipped with a function that allows you to quickly check the correct response of the sensor to the CO test gas. Thanks to the special shock-resistant design, the detector has been approved for use not only in houses and apartments, but also in caravans, motorhomes and boats. After 10 years from the activation of the power supply, the sensor will remind you to replace the device. K7CO is marked with the B building mark confirming compliance with the Polish standard PN-EN 50291-1: 2018 + AC 2021 for home carbon monoxide detectors. The research was carried out by the Scientific and Research Center for Fire Protection, National Research Institute. Józef Tuliszkowski (CNBOP-PIB) and has a BSI certificate confirming compliance with the requirements of BS EN 50291-1: 2018 issued by the British Standards Institution (BSI). In addition, the K7CO sensor is certified to meet the requirements of BS EN 50291-2: 2019 (PN-EN 50291-2: 2020) and allows the device to be used in camping vehicles and boats. Compliance with the above-mentioned standard has been confirmed by an independent research unit of the British Standards Institution.
Fire is one of the biggest and most common hazards in typical households. Its occurrence can be the result of human action, but also of an independent factor such as a short circuit in the electrical system, etc. A fire can have serious consequences, resulting in property damage, loss of health and, in the worst case, even death. The simplest way to protect against fire is to use certified smoke detectors that provide full protection and, in the event of an alarm, give you the chance to take action and possibly evacuate. The FireAngel FA6115 smoke detector has been developed for effective protection against the risks and consequences of fire.In the event of smoke in a room, the FireAngel FA6115 will inform users with a clear optical signal and a loud 85 dB audible alarm. The built-in self-monitoring system continuously checks for correct operation and, if necessary, will signal if the device is not working correctly. Independently, the user can test the sensor himself using the large TEST/RESET button in the centre of the housing. The included AA-type batteries last a long time and, if they are low, the self-monitoring system will signal that they need to be replaced. Once the 10-year lifespan has elapsed, the unit will indicate that a replacement is required. A major advantage of the FA6115 sensor is that it is quick and easy to mount to the ceiling, via the included mounting studs.
Detector Type Fire|Wireless|Current drain 20 mA|Dimensions 108 x 61 mm Current drain 20 mA Dimensions 108 x 61 mm Brown box quantity 1 Unit Brutto Volume 0,001008 cubm Unit Net Weight 0,17 kg Unit Gross Weight 0,217 kg
Wireless fire detector with smoke and temperature sensors. Built-in non-replaceable lithium batteries, up to 10 years of battery life. FireProtect 2 is a next-gen device designed for instant fire detection. The unique smoke chamber does not require regular cleaning, the dual-spectrum sensor distinguishes smoke from steam, the thermistor quickly reacts to the synthetic materials burning, and sophisticated software minimizes false alarms. Everything meets the most modern fire safety standards. Thought-out design, mounting, and the in-app settings make installation straightforward and quick. Detector Type Fire Wireless, Operating temperature range 0°C to +50°C Power supply requirements 2 non-replaceable lithium batteries, Colour White Dimensions 123.7 × 123.7 × 44.7 mm
Independent, remote controlled smoke detector, fotoelectric, with extremely loud sirene and built-in 3 V battery - product life 10 years. Features:- simple installation- without cable- easy-press-button- silent standby- photoelectric detection- warning sound 85 dB Type of Sensor photo optical Low Battery Warning Visual / Audible Volume (dB) 85 Wall Mount Included Colour White Dimensions (mm) 115 x 45 Weight (g) 180 Product Type Smoke Detector
Wireless fire detector with smoke, temperature, and CO sensors. Built-in non-replaceable lithium batteries, up to 10 years of battery life. FireProtect 2 is a next-gen device designed for instant fire detection. The unique smoke chamber does not require regular cleaning, the dual-spectrum sensor distinguishes smoke from steam, the thermistor quickly reacts to the synthetic materials burning, and sophisticated software minimizes false alarms. Everything meets the most modern fire safety standards. Thought-out design, mounting, and the in-app settings make installation straightforward and quick. Detector Type Fire Wireless, Operating temperature range 0°C to +50°C Power supply requirements 2 non-replaceable lithium batteries, Colour Black Dimensions 123.7 × 123.7 × 44.7 mm
