Suitsu- ja vingugaasiandurid

K7DCO carbon monoxide sensor equipped with a Kidde electrochemical sensor, guaranteeing 10 years of operation. Battery power supply allows the detector to be mounted in an optimal place in the room and provides protection also in the event of a power failure in the network. The built-in LCD display shows the concentration level of carbon monoxide in the range from 0 to 999 PPM. CO concentration measurements are performed every second. Exceeding the permissible CO level is signaled optically (red LED) and acoustically (loud, pulsating sound alarm with a strength of 85dB). The device's memory stores information about the detection of CO concentration exceeding the level of 100 PPM. Thanks to this, the user can make sure that there is no emission of carbon monoxide during his absence in the room. The sensor has a test / reset button that allows you to check the device's operation and reset the alarm signal, as well as a button when pressed, which displays the highest detected CO level stored in the sensor's memory. The sensor also has the function of informing about the activation of the alarm in the last 14 days. Thanks to this, the user can make sure that there is no emission of carbon monoxide during his absence in the room. The efficiency control system monitors on an ongoing basis, among others: the sensor, internal circuits and the state of the battery. In the event of a malfunction or low battery level, the yellow LED blinks, the LCD panel displays the appropriate graphic information and an audible signal sounds. In addition, the sensor is equipped with a simulation test function that allows you to quickly check the correct response of the sensor to the CO test gas. Thanks to the special shock-resistant design, the detector has been approved for use not only in houses and apartments, but also in caravans, motorhomes and boats. After 10 years from the activation of the power supply, the sensor will remind you to replace the device. K7DCO is marked with the B building mark confirming compliance with the Polish standard PN-EN 50291-1: 2018 + AC 2021 for home carbon monoxide detectors. The research was carried out by the Scientific and Research Center for Fire Protection, National Research Institute. Józef Tuliszkowski (CNBOP-PIB) and has a BSI certificate confirming compliance with the requirements of BS EN 50291-1: 2018 issued by the British Standards Institution (BSI). Additionally, the K7DCO sensor is certified to meet the requirements of BS EN 50291-2: 2019 (PN-EN 50291-2: 2020) and allows the device to be used in camping vehicles and boats. Compliance with the above-mentioned standard has been confirmed by the independent research unit of the British Standards Institution.

Range: 3 Volume: 85 Special functions: - Technology: optical- Test & Hush ™ button: to control and operate the device and to switch off the alarm triggered by mistake- End-of-life indication: sound and light for 30 days before 10 years after power activation- Ceiling / wall mounting method (mounting screws included)- Power supply: DC, built-in battery - does not need to be replaced over the entire life of the sensor Environment requirements: - Operating temperature: 0 ° C - 40 ° C- Humidity: up to 93% RH, non-condensing Accessories included: Mounting screws Dimensions: - Diameter: 104 mm- Height: 42 mm Weight: 128 Other features: Certificates and approvals:- PN-EN 14604: 2006P- EN14604: 2005 / VDS Q- CE 086-CPD-535595

Range: 3 Volume: 85 Special functions: - Technology: optical- Test button: to control and operate the device- Hush® button: Disables accidental alarm- Mounting: ceiling / wall (mounting screws included) Environment requirements: - Operating temperature: 0 ° C - 40 ° C- Humidity: up to 93% RH, non-condensing Accessories included: - Mounting screws- Alkaline battery Dimensions: - Diameter: 100 mm- Height: 38 mm Weight: 102 Other features: Certificates and approvals:- PN-EN 14604: 2006P- EN14604: 2005 / VDS- 0786-CPD-20733

Narrow beam indoor motion detector. Protects windows, doors, and valuables. With the MotionProtect Curtain detectors, you can secure the perimeter of your house and freely move indoors. If a stranger breaks in, the system will raise an alarm and call the security company. - Detects motion with a range of up to 15 meters - Works up to 3 years on the pre-installed battery - Transmits alarms at a distance of up to 1,700 meters away from the hub Detector Type Motion Detection technology PIR, Detecting area up to 15 meters Wireless, Operating temperature range −10°С to +40°С Colour White, Included Accessories SmartBracket mounting panel,CR123A batteries (pre-installed),Bracket,Installation kit,User’s guide. Dimensions 134 × 44 × 34 mm

Wireless motion detector that notifies the owner of the first signs of home or office intrusion. The detector is fastened to the wall in front of the doors and other places likely of intruder entry. - Operates up to 5 years without battery replacement - Ignores cats and dogs with weight of up to 20 kg and height up to 50 cm - Accurately detects motion in heat conditions, even at a temperature of +40°? Detector Type Motion Detection technology PIR, Detecting area Up to 12 m Wireless, Operating temperature range -10°С to +40°С Colour White, Included Accessories SmartBracket mounting panelCR123A battery (pre-installed),Installation set,User's guide. Dimensions 110 × 65 × 50 mm

The FireAngel FA6120 is a premium smoke detector designed to protect against the risk of fire. The sensor's unique design and technologies ensure a quick response when a small amount of smoke appears. Powered by a built-in lithium battery that does not need replacing or recharging, the detector will provide safety and convenience for a lifetime of 10 years. Fire is one of the biggest and most common hazards in typical households. Its occurrence can be the result of human action, but also an independent factor, such as a short circuit in the electrical system, etc. A fire can have serious consequences, resulting in property damage, loss of health and, in the worst case, even death. The simplest way to protect against fire is to use certified smoke detectors, which provide full protection and, in the event of an alarm, give you the chance to take action and possibly evacuate.

- Operates up to 7 years without battery replacement - Ignores thunder, dogs barking and noise outside the window - Detects breakage at a distance of up to 9 m Detector Type Glass break Wireless, Power supply requirements Battery: CR123A battery, 3 V Colour White

Shelly Plus Smoke WiFi Smoke Sensor The Shelly Plus Smoke is a smart photoelectric smoke sensor that provides advanced fire protection. With its unique smoke detection technology, the Shelly Plus Smoke can effectively identify slow-burning fires that may develop over many hours before flames become visible. It's an indispensable device for ensuring the safety of your home. Safety Assurance Shelly Plus Smoke utilizes advanced photoelectric technology to detect smoke associated with slow-burning fires. This means the device can warn you of potential danger before flames become visible. This valuable early warning can give you more time to take appropriate actions and evacuate. Moreover, with LED indicators, you will always know the status of your device. Full Control Shelly Plus Smoke provides connectivity through Wi-Fi and Bluetooth, meaning you can have full control over the device using your smartphone or tablet. You can monitor the status of the sensor, receive real-time notifications of detected smoke, and act remotely if needed. It's the flexibility that gives you peace of mind.   ManufacturerShelly ModelShelly Plus Smoke Alarm Dimensions86 × 31 mm Operating Temperature-0°C to 55°C Humidity30% to 95% DC Power Supply1x 3 V CR123A/CR17335 battery Operating Time5 years Smoke SensorPhotoelectric RF Band2400 - 2495 MHz Wi-Fi Protocol802.11 b/g/n Wi-Fi Rangeup to 30 m Bluetooth Protocol4.2 Bluetooth Rangeup to 10 m