Swap the Speed Ring to the Elinchrom Speed-Inner Ring. Insert on your Phottix Raja Series Softbox – and use it with Elinchrom, Profoto and Balcar (Alien Bee, Einstein) mounts. Easy to install. Made from high-grade material it is durable and will withstand the demands of professional use. Softboxes sold separately. Compatible with Phottix Raja Quick-Folding softbox 60x90cm Phottix Raja Quick-Folding softbox 65cm Phottix Raja Quick-Folding softbox 105cm Phottix Raja Deep Quick-Folding softbox 60cm Phottix Raja Deep Quick-Folding softbox 80cm
Phottix Raja Quick-Folding Strip Softbox 30x140cm. The Phottix Raja series opens like an umbrella and is ready to use in seconds. No anxiety. No frustration. Pop it open, add the baffle, diffuser and grid – mount on your studio light and you are ready to shoot. The Phottix Raja Quick-Folding Softboxes come with a Phottix-compatible S-Mount (Bowens). Swappable mounts for Elinchrom and Profoto are available (sold separately)
This high performance flash features a dust‑, splash‑ and freezeproof (‑10°C) construction in a compact and lightweight housing. When combined with the weather sealed cameras of the OM‑D series, and M.Zuiko PRO lenses, you do not need to worry about shooting in harsh environments. This high‑intensity flagship flash comes with a maximum guide number of 58, while the combination of the camera's built‑in image processor (TruePic) with the TTL synchronization technology enables optimal lighting during your photo shootings. As the flash is equipped with a wireless lightning mode you can make use of high‑intensity multi‑flash photography via wireless control, which enables you to control up to 4 flash groups, to select whether a group fires or not, to compensate for the flash output, and to adjust various settings. One other very well accepted extra is the slave function‑ you can simply attach the flash to the hot shoe of a camera and use it as the master flash while using the commander function. Of course the unique Olympus High Res. Shot, Focus Stacking, and Focus Bracketing functions are supported too and shorter shooting intervals than before are now available!The FL‑900R is equipped with an LED light for movies, which is effective for shooting OM‑D Movies in low light or backlit conditions. Perfect for lenses with a focal length of 12mm (24mm*) or higher.
Designed for Nikon Z 8 to facilitate a switch between horizontal and vertical modes and to improve grip experience. SmallRig 3942 L-Shape Mount Plate For Nikon Z 8 It locks the camera via one 1/4 "-20 screw at the bottom and one locating pin, with rub pads preventing scratches, and has a hinge arm at the battery door that fits the camera curve to enhance grip. There are multiple accessory mounts: An Arca Swiss quick-release plate for Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals 1/4"-20 & 3/8"-16 threaded holes at the bottom that support SmallRig Side Handle 2093 & 3847, Quick Release Plate 1280 Strap holes for SmallRig Hand Strap 3848 & 2456. The L-Bracket also features a QD mount to attach the QD strap buckle, 1/4"-20 threaded holes, suitable for SmallRig Cold Shoe Mount 2736 for the microphone, as well as a 23mm stretchable side plate that allows cables through in vertical shooting. Besides, a magnetic wrench is included for easy disassembly and assembly. Compatibility: Nikon Z 8 Packaging includes: 1x L-Shape Mount Plate 1x Allen Wrench
SMALLRIG 4519 Camera Cage for Nikon Z 6III is designed to provide protective housing and versatile expansion options for a camera. The cage securely fastens the camera with a 1/4"-20 screw at the bottom and dual M2.5 screws on the sides, while integrated pads prevent scratching. It provides unobstructed access to all camera interfaces, card slots, the flip screen, and the battery door. The cage features various expansion options, such as 1/4"-20 threaded holes, 3/8"-16 threaded holes, and ARRI locating holes, compatible with SmallRig side handles 2093, 4015, top handles 3765, 2165, monitor mounts 2903, 2904, tripods 4465, 3989, power bank holders 2336 and mini V-mount battery plates 2987. Incorporated 1/4"-20 locating holes on the sides allow for the attachment of accessories such as SmallRig single rod clamp 3598, magic arm 3873, and side handle 4346. Featuring a built-in NATO rail on the left for rapid attachment and detachment of SmallRig side handles 3847, 4017. The integrated cold shoe mounts support microphones, LED video lights, and more. Featuring a built-in wrist strap slot for use with SmallRig wrist straps 3848, 2456, as well as an integrated QD interface compatible with shoulder strap 4118. Arca-Swiss quick-release plate on the bottom is compatible with Arca-type tripods and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 4 / RS 4 Pro gimbals, which allows for easy transitions between gimbals, handheld and tripod shooting. Additionally, a dual-head flat wrench on the base simplifies assembly and disassembly. Compability: Nikon Z 6III Packaging includes: 1x Cage
Designed for professional outdoor videography, offering swift and convenient operation. Featuring X-clutch hydraulic technology, squeezing a single clutch allows all legs to rapidly unfold, adjust the angle, and automatically lock in just one second, providing photographers with a seamless experience. Operating Altitude ranges from 27cm to 168cm, and a compact storage length of 79 cm. SmallRig 4259 x Potato Jet Tribex Hydraulic Carbon Fiber Tripod Kit The clutch can also be adjusted to 45° and 90° to accommodate various shooting scenarios. Constructed with carbon fiber, both the legs and central column ensure lightweight design while delivering exceptional stability and high load-bearing capacity The central column features a quick-lock design for easy height adjustments, with a detachable allen wrench built into the other side of the hook for convenient camera equipment assembly/disassembly, and the option for low-angle shooting at a minimum height of 27cm. The compact design of the tripod allows it to fit in any standard luggage. The kit includes a compact and lightweight hydraulic fluid head featuring an adjustable 4-step counterbalance system. When the gravitational center height is set at 55mm, the 4-step counterbalance system effectively stabilizes cameras or other equipment up to 6 kg while providing precise control over camera tilt. The fluid head allows seamless, stepless adjustments for tilt and pan damping, catering to filmmakers´ varying shooting preferences. The fluid head adopts a new Touch-and-Go quick release mount plate design which does not require alignment and is more efficient than traditional slide-in plates. The plate is compatible with Manfrotto and DJI RS series quick release plates, facilitating swift transitions between stabilizers and tripods during filming. The user-friendly detachable telescopic handle (22-35cm) enables easy control of the head when attached to either the left or right side, ensuring compatibility with any grip. The fluid head also features two 1/4"-20 threaded holes for attaching accessories like magic arms, along with a built-in flat head screw for convenient camera installation and removal. The tripod also includes quick-release rubber feet with integrated spikes, allowing for seamless adaptation to various terrains. Note: The weight capacity of the tripod head is not the absolute limit - it varies depending on the type of equipment, lenses used, accessories attached, and changes in the center of gravity. Max payload of tripod: 25kg (center column not raised, tripod head detached, leg angle at 23°, height at 141cm). After use in water, it needs to be dried before use. Technical info: Legs Diameter: 29.5mm - 25.5mm - 22mm Fluid Head Base Diameter: 60.0mm Tilt Range: +90°/-65° Counterbalance Payload: 0 - 6.0kg Counterbalance Step: 4-Step (0,1, 2, 3 ) Tilt Control: Stepless Pan Control: Stepless Compatibility: Manfrotto 501PL Quick Release Plate DJI RS Series Quick Release Plate Package includes: 1x Tripod Kit 1x Allen Wrench 1x Storage Bag 1x Smartphone Holder
Kenko Smart Filter MC Protecter SLIMThis multicoated filter with slim designed aluminum frame is perfectly suitable for general use.The Smart MC Protector is multi-coated on both sides of the glass to reduce the chance of reflections or flare that could ruin a good shot. A low profile frame helps to avoid vignetting on a wide angle lens. This is a good multi-purpose filter that can be left on the lens at all times for protection. This filter has a high-quality durable aluminum frame that can stand up to years of use Diameter (mm) 62
Jäädvusta oma mälestused paberfotol ning näita neid ka teistele selles Victoria Collection pildiraamis. Vali ise, kas soovid pilti hoida püst- või rõhtasendis.
Jäädvusta oma mälestused paberfotol ning näita neid ka teistele selles Victoria Collection pildiraamis. Vali ise, kas soovid pilti hoida püst- või rõhtasendis.
Jäädvusta oma mälestused paberfotol ning näita neid ka teistele selles Victoria Collection pildiraamis. Vali ise, kas soovid pilti hoida püst- või rõhtasendis.
Jäädvusta oma mälestused paberfotol ning näita neid ka teistele selles Victoria Collection pildiraamis. Vali ise, kas soovid pilti hoida püst- või rõhtasendis.
Jäädvusta oma mälestused paberfotol ning näita neid ka teistele selles Victoria Collection pildiraamis. Vali ise, kas soovid pilti hoida püst- või rõhtasendis.
Iseliimuvad fotonurgad on mugavad abivahendid fotode kinnitamiseks. Nurgad on läbipaistvad ning neid saab kergesti eemaldada ja uuesti kinnitada. Valmistatud lahusti- ja happevabast materjalist.
Hama Frameless Picture Holder "Clip-Fix" ARG - Frame quick and simple! Features: Frameless picture holder made of round ground, quality washed glass Unobtrusive design for a timeless look Clip-Fix-System to frame quick and simple Dezentes Design sorgt für zeitloses Ambiente Matches every style Type Frameless Picture Holder Dimensions (cm) 30 x 45
Litemons video light series is a set of entry-level tools designed to make your journey of the content creation much easier, a portаble, ease-of-use and budget-friendly lighting solution to which our LED6R/LED6Bi belongs. LED6R will give you the right amount of light, whether you are creating creative shots, vlog, lighting a party or taking product photography. You can adjust the color temperature in the range from 3200 to 6500K or chose Or choose one of the 36,000 colors from the RGB color palette. Brightness of the device itself can be set between 0% and 100%. Litemons is equipped with a 1800 mAh lithium battery that is able to power the panel for 2 to 10 hours, depending on the power set. The built-in magnet on the back of the device allows the panel to be mounted on metal surfaces. It also has an additional cold shoe for mounting on the camera and three handles on the housing, allowing you to connect additional panels and create a larger light source. LED6R, in addition to the possibility of shining one of the many colors from the RGB color palette, also has a special effects mode. After turning it on, we have a choice of effects such as: firetruck, police car, flash, laser, campfire simulation or RGB wheel. ncluded: Godox LED6R Litemons RGB Diffuser USB Type-C cable Original packaging
Replacement silica gel used to prevent fogging in the underwater case.Includes 5 replacements. Note: (2003 May. Latest) stated on the packaging indicates that the gel is compatible with all underwater housings created after May 2003. This is not an expiration date.
Alles olevate kaadrite indikaator: Ei; Toitetüüp: AAA x1; Värv: Kollane; Mõõtmed (laius х kõrgus х sügavus): 114 x 63 x 35; Kaal: 117; Filmi tüüp: 35 mm; Säri korrektuur: Ei; Säriaeg: 1/120; Sisseehitatud välk: On; Optika: Kodak; Autofookus: On;...
80 cm pikkuse juhtmega päästik iseavajaga, taimeriga, aegvõtte taimeriga ja särituse loendamise funktsiooniga. Taimeri määranguks saab valida 1 s kuni 99 tundi, 59 min, 59 s. Spetsiaalse ketta abil saad sisestada numbreid lihtsalt pöidlaga. Sobib Canon EOS 10D, EOS 1D Mark II, EOS 1D Mark II N, EOS 1D Mark III, EOS 1D Mark IV, EOS 1Ds Mark II, EOS 1Ds Mark III, EOS 1V, EOS 1V HS, EOS 20D, EOS 3 kere, EOS 30D, EOS 40D, EOS 50D, EOS 5D, EOS 5D Mark II, EOS 7D, EOS D30, EOS D60 peegelkaameratele.
With twin levels and mounting feet for landscape and portrait position. Transparent housing. Attaches to the camera's accessory shoe. Dimensions: approx. 18 x 18 x 33 mm (0.7 x 0.7 x 1.3").
Reliable protection for your lens. Made from high-quality neoprene. Water-repellent. Lightweight, soft and elastic material. Can be closed with drawstring. Sturdy and durable. Inner dimensions approx. 10x10x23cm.
