Description This device is used to power an industrial camera and other equipment. The power supply complies with the ROHS directive, short-circuit and over-voltage protection. The device can also be used to supply LED lights, code locks, electric switches, etc. Input voltage: 230V AC Output voltage: 12V DC Plug type: 2.1/5.5 mm Output current: 1A max Wire length: 1m Average efficiency: 78.2% Vendor Homepage www.genway.pl/zasilacz-stabilizowany-typu-desktop-12v-1a-4524.html Unit Gross Weight 0.11 kg Unit Net Weight 0.1 kg Shipping box quantity 1 Unit Brutto Volume 0.0004125 cubm Shipping/Package Box Dimensions Shipping Box Width 5 cm Shipping/Package Box Dimensions Shipping Box Depth 11 cm Shipping/Package Box Dimensions Shipping Box Height 7.5 cm Shipping/Package Box Dimensions Shipping Box Weight 0.11 kg
FIBARO Bypass 2 (FGB-002) is a device designed to work with FIBARO Dimmer 2 (FGD-212). It should be used in case of connecting lED bulbs or energy saving compact fluorescent lamps. FIBARO Bypass 2 prevents flickering of the lED lights and glowing of the turned off compact fluorescent lamps. In the case of 2-wire connection, FIBARO Bypass 2 allows to reduce minimum power of load required by the Dimmer 2 for correct operation. FGB-002 provides powering of the Dimmer 2 in case of controlling the low loads of minimum power down to 5VA (for cosφ>0.5)
Home Energy Meter Gen5 3 phase You hear a lot about energy use these days. About how if we reduce the amount of energy we use we can not only save money but also save the environment. But saving money by using less electricity is only possible if we understand when and how we use it. That’s what Aeotec’s Z-Wave Home Energy Meter provides you with – understanding. Installed in an electricity box, the energy meter will monitor the total consumption of electricity used by an entire building. And its intelligent clamps will report that energy use back to your Z-Wave gateway or controller, in watts or kilowatt-hours, and in real time. So you can see how much electricity you really use and when you use it.
WallMote. Wireless Z-Wave control. On tap. On any wall. WallMote is the wall switch that you can install anywhere. Wirelessly. Whatever the room, whatever the wall, WallMote is perfect. It is the wireless, Z-Wave wall switch that you can place anywhere, on any wall, with as little as double sided tape. Unpack it. Stick it. Charge it. Control is just a tap away. Simple to install. WallMote is the wall switch for anywhere because of it is simple to install. Mounting it requires just two steps. 4 touch areas. Control 16 different scenes.
