Arvutitark OÜ

Alphacool Core RX 9070 XT Nitro+ with Backplate Alphacool presents the new graphics card water coolers for the latest AMD Radeon RX generation. They are part of the Core product series and combine top quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the center of the cooler is a copper water block milled from a single piece and complemented by a precisely manufactured brass terminal with a nylon cover. A chrome plating makes the copper water block more resistant and provides a smoother and shinier surface than conventional nickel plating.The visual design of the GPU water cooler has only been slightly changed. A particular highlight is the newly added Core emblem above the jet plate, emphasizing its belonging to the Core series and enhancing the design visually. The series continues to rely on premium brass fittings that guarantee optimal quality and safety. The specially fitted aluminum backplate covers the entire backside of the copper cooler, providing a clean and uniform appearance. The acrylic, in combination with the aRGB lighting, enables even and impressive illumination of the entire cooler.Technically, the GPU water cooler has been completely revised. To optimize cooling performance, the clearances between the cooler and the PCB components have been redefined and tested. The water flow has been simulated with state-of-the-art software and checked in practical tests. These extensive tests made it possible to improve the cooler base and the nozzle to ensure the best possible cooling performance for the new AMD Radeon RX generation. Compatibility:- Sapphire NITRO+ AMD Radeon™ RX 9070 GPU- Sapphire NITRO+ AMD Radeon™ RX 9070 XT GPU Technical Data Cooler Dimensions complete (L x W x H) 222.20 x 137.97 x 33.52mm Material cooler base chrome-plated copper Material cooler top acrylic Material terminal nylon Material fitting thread brass Max. operating temperature 60°C Pressure tested 0.8 bar Fittings 4 x G1/4" Cooler base thickness 3.25mm Cooling fin thickness 0.4mm Cooling fin spacing 0.4mm Lighting digital aRGB LEDs Power connection digital aRGB LEDs 3-pin JST Voltage digital aRGB LEDs 5V Number of digital aRGB LEDs 10 Color transparent Technical Data Backplate Dimensions (L x W x H) 222.20 x 109.40 x 6.00mm Backplate thickness without spacers 3mm Material aluminum Warranty: 3 years? Warranty terms

Alphacool introduces its new series of graphics card water coolers for the latest AMD Radeon RX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new AMD Radeon RX generation. Compatibility:- PowerColor Red Devil AMD Radeon™ RX 9070 XT 16GB GDDR6 (RX9070XT 16G-E/OC) Technical data coolerDimensions total (L x W x H)214,90 x 145,93 x 33,10mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalNylonMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs10ColortransparentTechnical data backplateDimensions (L x W x H)214,90 x 117,40 x 6,00mmThickness backplate without spacers3mmMaterialAluminiumWarranty: 3 years???? Warranty Terms

Alphacool introduces its new series of graphics card water coolers for the latest AMD Radeon RX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new AMD Radeon RX generation. Compatibility:- ASRock AMD Radeon™ RX 9070 XT Steel Legend 16GB Technical data coolerDimensions total (L x W x H)200,00 x 127,30 x 33,35mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalNylonMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs10ColortransparentTechnical data backplateDimensions (L x W x H)200,00 x 98,80 x 6,00mmThickness backplate without spacers3mmMaterialAluminiumWarranty: 3 years???? Warranty Terms

Alphacool introduces its new series of graphics card water coolers for the latest AMD Radeon RX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new AMD Radeon RX generation. Compatibility:- XFX Swift AMD Radeon RX 9070 OC Triple Fan Gaming Edition (RX-97SWFB3B9)- XFX Swift AMD Radeon RX 9070 OC White Triple Fan Gaming Edition (RX-97SWFB3W9)- XFX Quicksilver AMD Radeon RX 9070XT White Gaming Edition (RX-97TQICKW9)- XFX Swift AMD Radeon RX 9070XT Triple Fan Gaming Edition (RX-97TSWF3B9)- XFX Swift AMD Radeon RX 9070XT White Triple Fan Gaming Edition (RX-97TSWF3W9) Technical data coolerDimensions total (L x W x H)195,60 x 127,30 x 33,35mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalNylonMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs10ColortransparentTechnical data backplateDimensions (L x W x H)195,60 x 98,80 x 6,00mmThickness backplate without spacers3mmMaterialAluminiumWarranty: 3 years???? Warranty Terms

Alphacool Core RX 9070 XT Taichi with Backplate Alphacool presents the new graphics card water coolers for the latest AMD Radeon RX generation. They are part of the Core product series and combine the highest quality with exceptional performance. Through optimized technical design, these GPU coolers provide outstanding cooling performance.At the heart of the cooler is a copper cooling plate milled from a single piece, complemented by a precisely manufactured brass connection terminal with a nylon cover. Chrome plating makes the copper cooler more durable and provides a smoother and more radiant surface compared to standard nickel plating.The visual design of the GPU water cooler has been changed only slightly. A particular highlight is the newly added Core emblem above the jet plate, which emphasizes its affiliation to the Core series and visually enhances the design. The series continues to rely on high-quality brass fittings that guarantee optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and unified look. The acrylic, combined with the aRGB lighting, allows for uniform and impressive illumination of the entire cooler.Technically, the GPU water cooler has been completely reworked. To optimize cooling performance, the distances between the cooler and the components of the PCB have been newly defined and tested. The water flow was simulated with state-of-the-art software and verified through practical tests. Through these extensive tests, the base of the cooler and the nozzle were improved to guarantee the best possible cooling performance for the new AMD Radeon RX generation. Compatibility:- ASRock AMD Radeon™ RX 9070 XT Taichi 16GB OC Technical Data Cooler Dimensions complete (L x W x H) 217.10 x 127.37 x 33.05mm Cooler base material chrome-plated copper Cooler top material acrylic Terminal material nylon Connection thread material brass Maximum operating temperature 60°C Pressure tested 0.8 bar Connections 4 x G1/4" Cooler base thickness 3.25mm Cooling fin thickness 0.4mm Cooling fin spacing 0.4mm Lighting digital aRGB LEDs Digital aRGB LED power connection 3-Pin JST Digital aRGB LED voltage 5V Number of digital aRGB LEDs 10 Color transparent Technical Data Backplate Dimensions (L x W x H) 217.10 x 98.80 x 6.00mm Backplate thickness without spacer 3mm Material aluminum Warranty: 3 years? Warranty conditions

Alphacool Core RX 9070 XT TUF + Prime with Backplate Alphacool presents the new graphics card water coolers for the latest AMD Radeon RX generation. They are part of the Core product series, combining the highest quality with exceptional performance. Thanks to optimized technical design, these GPU coolers deliver outstanding cooling performance.At the center of the cooler is a copper heat sink milled from a single piece, complemented by a precisely crafted brass connection terminal with a nylon cover. Chrome plating makes the copper cooler more durable and provides a smoother and more radiant surface than conventional nickel plating.The visual design of the GPU water cooler has only been slightly modified. A prominent highlight is the new Core emblem above the jet plate, emphasizing its affiliation with the Core series and visually enhancing the design. The series continues to rely on high-quality brass fittings, guaranteeing optimal quality and safety. The specially tailored aluminum backplate covers the entire rear of the copper cooler, ensuring a clear and unified look. The acrylic, combined with aRGB lighting, enables even and impressive illumination of the full cooler.Technically, the GPU water cooler has been completely overhauled. To optimize cooling performance, the distances between the cooler and the components of the PCB have been redefined and tested. The water flow was simulated with cutting-edge software and examined in practical trials. Thanks to these extensive tests, the cooler base and nozzle have been improved to guarantee the best possible cooling performance for the new AMD Radeon RX generation. Compatibility:- Asus Prime Radeon™ RX 9070 OC Edition 16GB GDDR6- Asus TUF Gaming Radeon RX 9070 OC Edition 16GB GDDR6- Asus Prime Radeon™ RX 9070 XT OC Edition 16GB GDDR6- Asus TUF Gaming Radeon RX 9070 XT OC Edition 16GB GDDR6 Technical Data Cooler Dimensions Complete (L x W x H) 220.00 x 144.50 x 33.07mm Material Cooler Base chrome-plated copper Material Cooler Top acrylic Material Terminal nylon Material Connection Thread brass Maximum Working Temperature 60°C Pressure Tested 0.8 bar Fittings 4 x G1/4" Cooler Base Thickness 3.25mm Fin Thickness 0.4mm Fin Spacing 0.4mm Lighting digital aRGB LEDs Power Connector digital aRGB LEDs 3-Pin JST Voltage digital aRGB LEDs 5V Number of digital aRGB LEDs 10 Color transparent Technical Data Backplate Dimensions (L x W x H) 220.00 x 116.00 x 6.00mm Backplate Thickness without Spacers 3mm Material aluminum Warranty: 3 years? Warranty Terms

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability. Better than standard thermal pads? The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer. Increased service life! The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance. Versatile use! Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal pad Dimensions (L x W x H): 120 x 20 x 0,5mm Thermal Conductivity (ASTM D5470): 9.0 W/mK (±10%) Hardness (ASTM D2240): 50 (Shore 00) (±15) Working temperature: -50 to ~180°C Volume Resistance (ASTM D257): 1×10¹² Ohm-m Dielectric Breakdown Voltage (ASTM D149): ≥8 KV/mm Density (ASTM D792): 3.2 g/cm³ (±10%) Elongation (ASTM D412): 40% Weight Loss (ASTM E595): less than 1% Flame Rating (UL 94): V-0 Color: pink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability. Better than standard thermal pads? The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer. Increased service life! The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance. Versatile use! Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal pad Dimensions (L x W x H): 120 x 20 x 1mm Thermal Conductivity (ASTM D5470): 9.0 W/mK (±10%) Hardness (ASTM D2240): 50 (Shore 00) (±15) Working temperature: -50 to ~180°C Volume Resistance (ASTM D257): 1×10¹² Ohm-m Dielectric Breakdown Voltage (ASTM D149): ≥8 KV/mm Density (ASTM D792): 3.2 g/cm³ (±10%) Elongation (ASTM D412): 40% Weight Loss (ASTM E595): less than 1% Flame Rating (UL 94): V-0 Color: pink

Halterung für VPP und D5 Pumpen, kompatibel mit Distroplates der Core-Serie von Alphacool, aus stabilem Aluminium

Wasserkühlungs-Komplettset, beeinhaltet alle notwendigen Teile für eine CPU-Kühlung, inklusive Tubes, für Custom Wasserkühlungen

Wasserkühlungs-Komplettset, beeinhaltet alle notwendigen Teile für eine CPU-Kühlung, inklusive Tubes, für Custom Wasserkühlungen

Wasserkühlungs-Komplettset, beeinhaltet alle notwendigen Teile für eine CPU-Kühlung, inklusive Tubes, für Custom Wasserkühlungen

Wasserkühlungs-Komplettset, beeinhaltet alle notwendigen Teile für eine CPU-Kühlung, inklusive Tubes, für Custom Wasserkühlungen

The Alphacool Core Sensor allows you to show temperature of the fluid inside your cooling loop. Thanks to the available colour display, the temperature can be read either in degrees Celsius or Fahrenheit.Integration made easyThe Alphacool Core temperature sensor is very compact and can be integrated into any loop thanks to its two G1/4" internal threads. It does not matter whether the system is equipped with hoses or hard tubes. Using an adapter with G1/4" external thread, the sensor can be used on all exposed G1/4" threaded openings on the radiator, reservoir, graphics card cooler or CPU cooler.Temperature sensor & displayA classic NTC 10 kOhm thermistor is used as the sensor. The cable of the temperature sensor with a length of approx. 97 cm offers enough possibilities for a comfortable installation. Power is supplied via a 55 cm long cable with one male and one female 4-pin Molex connector. The readable temperature range is between -50 and 110 °C with a possible deviation of 0.1 °C. The display has a colour scale to keep track of critical temperature ranges at any time. Additional software for reading out the temperature ranges is not required.Download kOhm Sensor Table Alphacool Technical dataDimensions display47,8 x 28,2 x 16,7 mmTyp Displaymulti-coloured, indication optionally in ° C or FahrenheitConnection (sensor)G1/4" internal threadSensor typeNTC 10 kOhm thermistorPower connection4-Pol-Molex (12 V)Power cable length550 mmLength sensor cable970 mmTemperature measuring range-50 bis +110 Grad CelsiusColorBlack

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 0,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 1,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 2mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 3mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)120 x 20 x 0,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability. Better than standard thermal pads? The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer. Increased service life! The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance. Versatile use! Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal pad Dimensions (L x W x H) 120 x 20 x 1,5mm Thermal Conductivity (ASTM D5470) 6.2 W/mK (±10%) Hardness (ASTM D412) 50 (Shore 00) (±15) Working temperature -50 to ~150°C Volume Resistance (ASTM D257) 1×10¹³ Ohm-m Dielectric Breakdown Voltage (ASTM D149) 6 KV/mm (±10%) Density (ASTM D792) 3.1 g/cm³ (±10%) Elongation (ASTM D412) 50% Weight Loss (ASTM E595) less than 1% Flame Rating (UL 94) V-0 Color blue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability. Better than standard thermal pads? The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer. Increased service life! The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance. Versatile use! Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal pad Dimensions (L x W x H) 120 x 20 x 1mm Thermal Conductivity (ASTM D5470) 6.2 W/mK (±10%) Hardness (ASTM D412) 50 (Shore 00) (±15) Working temperature -50 to ~150°C Volume Resistance (ASTM D257) 1×10¹³ Ohm-m Dielectric Breakdown Voltage (ASTM D149) 6 KV/mm (±10%) Density (ASTM D792) 3.1 g/cm³ (±10%) Elongation (ASTM D412) 50% Weight Loss (ASTM E595) less than 1% Flame Rating (UL 94) V-0 Color blue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 0,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 1,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 1mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 2mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 3mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 0,5mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 1,5mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0ColorpinkElongation (ASTM D412)40%

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 2mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 3mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)120 x 20 x 1,5mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 0,5mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0ColorpinkElongation (ASTM D412)40%

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 1,5mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 1mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 2mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 3mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

With the Core Wind water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop.Eisblock Aurora XP³ Light CPU-CoolerWith the Eisblock Aurora XP³ Light you get a very compact CPU water cooler for all common mainstream sockets from AMD and Intel. The nickel-plated copper cooler base has an area of 56 x 56mm with cross-slot structure and 0.4 x 0.4mm thick pins through which the water can flow. Due to the extremely large cooling surface, the water can effectively absorb and dissipate heat from the cooler base. The Aurora design in conjunction with the 9 addressable digital aRGB LEDs offers many options for outstanding CPU water cooler illumination.Eisstation DC-LT Reservoir & DC-LT 2 PumpThe Eisstation reservoir is extremely compact and flexible in use due to a variety of mounting options. Three G1/4" connections allow uncomplicated integration into the water loop. The additional G3/8" connection facilitates the filling of the reservoir. The DC-LT 2 pump is installed in the bottom of the Eisstation and is not visible from the outside. Due to its design, the pump is extremely quiet without having to sacrifice performance.NexXxoS ST30 Full Copper 360mm Radiator V.2All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS ST30 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop.Eiszyklon Aurora LUX PRO Digital RGB Fan (120x120x25mm)The Eiszyklon Aurora LUX Pro fan offers a wide range of control as well as superior digital aRGB LED lighting. The individually controllable 5V aRGB LEDs coupled with the special design of the fan frame create unique lighting effects. The fan can be controlled from 800 to 2000 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still provides good airflow paired with high static pressure.AlphaTube HF 13/10mm tubing & HF G1/4" quick connect couplingThe clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop.Eiszapfen 13/10mm G1/4" ConnectionsAll the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off.Thermal Paste & CoolantThe included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle.aRGB Controller, Cables, Tools & AccessoriesAll cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately. Compatibility:Intel: 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 / 1851AMD: AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 Technical data CPU coolerDimensions (L x W x H)73 x 63 x 21mmMaterial coolernickel-plated copperMaterial housingacrylicThreads2 x G1/4“Illumination3-Pin 5V, 9 digital aRGB LEDsMax working temperature60°CPressure tested0,8 BarTechnical data reservoirDimensions (L x W x H)102 x 82 x 85mmCapacity250 mlMaterial housingnylon, PMMAThreads3x G1/4“ IT | 1x 3/8" ITIllumination4x 5mm LEDMax working temperature60°CPressure tested0,8 BarTechnical data pumpDimensions (L x W x H)52 x 41 x 18mmMaterialsynthetic material, ceramicsThreads3-Pin JSTSpeed2600 rpmOperating voltage6-13,5VPower consumption3.2WMaximum pumping head1mMaximum flow rate72L/hMax working temperature60°CPressure tested0,8 BarTechnical data radiatorDimensions (L x W x H)391,5 x 124 x 30mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4"Possible fan size120mmPossible fan assembly3x one-sided / 6x both-sidedFin density15Max working temperature60°CPressure tested0,8 BarTechnical data fanDimensions (L x W x H)120 x 120 x 25mmSpeed800 - 2000 RPM (+/- 10%)Threads4-Pin PWMVoltage12V DCCurrent consumption4,8WStatic pressure2,0 mm H2OMax. air flow104,49 m³/hSpeedometer signalyesIllumination3-Pin 5V, 16 digital aRGB LEDsTechnical data tubeDimensions (outer/inner)13/10mmMaterialPVCLength3mColorclearTechnical data 13/10mm G1/4" fittingsMaterialbrassThreads1x G1/4" OT | 1x tube connection 13/10mmColorblackTechnical data quick release couplingDimensions (L x D)60,3 x 26,1mmMaterialsynthetic materialThreads2x G1/4“ ITColorblackTechnical data coolantIngredientsosmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%)Boiling point105°CFreezing point-10°CPackaging unit1L bottleColorclear (not UV-active)Technical thermal greaseViscosity (mPa. s)3.000.000Specific Gravity (g/cm³)2,7Thermal Conductivity (w/m-K)16Temperature Stability (Degree Celcius)-50 ~ 200Colorgray

Hochwertiger CPU-Block für Wasserkühlungen, für AMD- und Intel-CPUs, sehr kompakt

Mini-Pumpe für Silent-Wasserkühlsysteme, 72 L/h Durchfluss und 1 m Förderhöhe, Betrieb zwischen 7 und 13,5 Volt bei nur 3,2 Watt Leistungsaufnahme, Ohne Aufsatz/Pumpen-Top

Kompakte DC-LT-Keramikpumpe, 120 l/h Durchflussleistung, 2,2 m Förderhöhe, leiser Betrieb

Splitterkabel für bis zu 3 D-RGB-Komponenten, drei 3-Pin-Stecker auf eine Buchse, inkl. Adapter für Mainboards

Splitterkabel für bis zu 3 D-RGB-Komponenten, drei 3-Pin-Stecker auf eine Buchse, inkl. Adapter für Mainboards

With the “Eisbaer”, Alphacool is fundamentally revolutionizing the AIO cooler market. Where traditional AIO CPU-coolers are disposable products which are neither upgradeable nor refillable, the Alphacool “Eisbaer” is modularly built and can be upgraded, rebuilt or refilled at any time. This means that the “Eisbaer” is not only an AIO, but also fully built on classic water cooling components. That means it is quieter and more powerful than the average AIO solution.RadiatorAlphacool depends on a radiator made of pure copper. The base of the radiator is the popular Alphacool NexXxoS series, which is well-loved around the world. The pure copper construction raises the cooling performance enormously compared to the usual aluminium radiators used in classic AIOs. The slight thickness of the fins ensures enormous cooling power in fans with low rotational speed. This ensures that the performance of the “Eisbaer” when adjusting the fans down decreases much more slowly than in radiators with higher fin thickness.HosesThe flexible PVC hoses make installing the “Eisbaer” easy. These hoses are easier to arrange and move into the right position. So the hoses don’t bend and stop the flow of the water, both hoses have been fit-ted with anti-kink springs. The 11/8 mm size is also a standard in the water cooling field, alongside the 13/10 and 16/10.Quick-lock closureThe “Eisbaer” was designed with expandability directly in mind. This is why you’ll find a quick-lock closure on one of the hoses. This quick-lock mechanism is compatible with Alphacool HF quick-lock closures (1010383, 1010394, 1010395, 1010442), with which the circuit can easily be expanded to include anything from a radiator to a graphics card cooler. Furthermore, the “Eisbaer” is compatible with the upcoming Alphacool GPX-Pro graphics card AIO, which will use identical quick-lock closures.ConnectorsAll connectors are based on the classic G1/4 inch thread, the standard thread in the water cooling field. This way, all attachments can be switched out for others any time as desired. This also means that, for example, you could later decide to switch to thicker hoses or even HardTubes and set your system uniquely apart. All these features make the “Eisbaer” cooler into something extraordinary. Its enhanced appearance from the illuminated logo and the illuminated reservoir, which also contains the pump, lets the interior of your PC shine in a whole new way. The soft-touch surface of the pump case is a further visual highlight. PumpsThe basis of the pumps is the Alphacool DC-LT 2 Ceramic, also available separately. The pump runs extremely quietly and can be regulated to between 6 and 13.5V. It can also be regulated through the motherboard. If the “Eisbaer” is being run alone, the 6V setting will still have next to no performance loss, as shown in diverse test results. The insulated pump case further perfects the noise generation and ensures that vibrations are almost completely absorbed. The smooth and shiny polished copper base of the cooler ensures optimal heat absorption and can relay the heat over the fine slit structure of the cooler to the water quickly and efficiently. With the “Eisbaer”, you get an all-around perfect product that is not only extremely high-powered but also works very quietly.To operate the Alphacool Eisbaer 200 CPU - Black at least one 200 mm fan is required. There are NO fans included in delivery! Compatibility:AMD: 754 / 939 / 940 / AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 / C32 / FM1 / FM2 / FM2+ / G34Intel: LGA 1150 / LGA 1151 / LGA 1156 / LGA 1200 / LGA 1700 / LGA 1851 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 755 Technical data radiatorL x W x H200 x 240 x 48 mmMaterialFull copperThreads2x G1/4”Technical data pump housingL x W x H66 x 66 x 69 mmMaterial reservoirTransparent NylonThreads2x G1/4”Technical data pumpSpeed2600 RPMVoltage6-13.5V DCPower consumption3,2WMaximum flow rate72 L/hMaximum head1 mOther technical dataNet weight2090 gMax working temperature60 °CPressure tested0,8 Bar

With the “Eisbaer”, Alphacool is fundamentally revolutionizing the AIO cooler market. Where traditional AIO CPU-coolers are disposable products which are neither upgradeable nor refillable, the Alphacool “Eisbaer” is modularly built and can be upgraded, rebuilt or refilled at any time. This means that the “Eisbaer” is not only an AIO, but also fully built on classic water cooling components. That means it isquieter and more powerful than the average AIO solution.RadiatorAlphacool depends on a radiator made of pure copper. The base of the radiator is the popular Alphacool NexXxoS series, which is well-loved around the world. The pure copper construction raises the cooling performance enormously compared to the usual aluminium radiators used in classic AIOs. The slight thickness of the fins ensures enormous cooling power in fans with low rotational speed. This ensures that the performance of the “Eisbaer” when adjusting the fans down decreases much more slowly than in radiators with higher fin thickness.HosesThe flexible PVC hoses make installing the “Eisbaer” easy. These hoses are easier to arrange and move into the right position. So the hoses don’t bend and stop the flow of the water, both hoses have been fit-ted with anti-kink springs. The 11/8 mm size is also a standard in the water cooling field, alongside the 13/10 and 16/10.Quick-lock closureThe “Eisbaer” was designed with expandability directly in mind. This is why you’ll find a quick-lock closure on one of the hoses. This quick-lock mechanism is compatible with Alphacool HF quick-lock closures (1010383, 1010394, 1010395, 1010442), with which the circuit can easily be expanded to include anything from a radiator to a graphics card cooler. Furthermore, the “Eisbaer” is compatible with the upcoming Alphacool GPX-Pro graphics card AIO, which will use identical quick-lock closures.FansAlphacool's Core is a quiet and efficient fan with a wide control range up to 2500 rpm. The via PWM signal controllable fan is particularly well suited for radiators. The double-bearing fan axis is smooth running and enables a long service life as well as quiet operation.ConnectorsAll connectors are based on the classic G1/4 inch thread, the standard thread in the water cooling field. This way, all attachments can be switched out for others any time as desired. This also means that, for example, you could later decide to switch to thicker hoses or even HardTubes and set your system uniquely apart. All these features make the “Eisbaer” cooler into something extraordinary. Its enhanced appearance from the illuminated logo and the illuminated reservoir, which also contains the pump, lets the interior of your PC shine in a whole new way. The soft-touch surface of the pump case is a further visual highlight. PumpsThe basis of the pumps is the Alphacool DC-LT 2 Ceramic, also available separately. The pump runs extremely quietly and can be regulated to between 7 and 12V. It can also be regulated through the motherboard. If the “Eisbaer” is being run alone, the 7V setting will still have next to no performance loss, as shown in diverse test results. The insulated pump case further perfects the noise generation and ensures that vibrations are almost completely absorbed. The smooth and shiny polished copper base of the cooler ensures optimal heat absorption and can relay the heat over the fine slit structure of the cooler to the water quickly and efficiently. With the “Eisbaer”, you get an all-around perfect product that is not only extremely high-powered but also works very quietly.Notice for expansionPlease take care not to mix up the IN and OUT ports. On the “Eisbaer”, the “outlet” is marked in “red” and the “inlet” in “blue”. On the components to be connected, it is the opposite. The coupling with the “blue” marking denotes the “outlet” and the coupling with the “red” marking is the “inlet”. This is important as in many coolers the flow direction is crucial for optimal cooling performance.Note on applicationPlease use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well. Compatibility:AMD: 754 / 939 / 940 / AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 / C32 / FM1 / FM2 / FM2+ / G34Intel: LGA 1150 / LGA 1151 / LGA 1156 / LGA 1200 / LGA 1700 / LGA 1851 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 755 Technical Details Pump (Alphacool DC-LT 2 2600 Ceramic)Speed2600 RPMVoltage6-13.5V DCPower consumption3,2WMaximum flow rate72 L/hMaximum head1 mhose length30 cmTechnical Details FansFansCoreBearinghydraulic BearingVoltageDC 12VPower connector4-Pin PWMRated Speed0 - 2500 rpm ±10%Max. Air Flow72.63 CFMMax. Static Pressure2.42 mm/H2O

With the “Eisbaer”, Alphacool is fundamentally revolutionizing the AIO cooler market. Where traditional AIO CPU-coolers are disposable products which are neither upgradeable nor refillable, the Alphacool “Eisbaer” is modularly built and can be upgraded, rebuilt or refilled at any time. This means that the “Eisbaer” is not only an AIO, but also fully built on classic water cooling components. That means it isquieter and more powerful than the average AIO solution.RadiatorAlphacool depends on a radiator made of pure copper. The base of the radiator is the popular Alphacool NexXxoS series, which is well-loved around the world. The pure copper construction raises the cooling performance enormously compared to the usual aluminium radiators used in classic AIOs. The slight thickness of the fins ensures enormous cooling power in fans with low rotational speed. This ensures that the performance of the “Eisbaer” when adjusting the fans down decreases much more slowly than in radiators with higher fin thickness.HosesThe flexible PVC hoses make installing the “Eisbaer” easy. These hoses are easier to arrange and move into the right position. So the hoses don’t bend and stop the flow of the water, both hoses have been fit-ted with anti-kink springs. The 11/8 mm size is also a standard in the water cooling field, alongside the 13/10 and 16/10.Quick-lock closureThe “Eisbaer” was designed with expandability directly in mind. This is why you’ll find a quick-lock closure on one of the hoses. This quick-lock mechanism is compatible with Alphacool HF quick-lock closures (1010383, 1010394, 1010395, 1010442), with which the circuit can easily be expanded to include anything from a radiator to a graphics card cooler. Furthermore, the “Eisbaer” is compatible with the upcoming Alphacool GPX-Pro graphics card AIO, which will use identical quick-lock closures.FansAlphacool's Core is a quiet and efficient fan with a wide control range up to 2500 rpm. The via PWM signal controllable fan is particularly well suited for radiators. The double-bearing fan axis is smooth running and enables a long service life as well as quiet operation.ConnectorsAll connectors are based on the classic G1/4 inch thread, the standard thread in the water cooling field. This way, all attachments can be switched out for others any time as desired. This also means that, for example, you could later decide to switch to thicker hoses or even HardTubes and set your system uniquely apart. All these features make the “Eisbaer” cooler into something extraordinary. Its enhanced appearance from the illuminated logo and the illuminated reservoir, which also contains the pump, lets the interior of your PC shine in a whole new way. The soft-touch surface of the pump case is a further visual highlight. PumpsThe basis of the pumps is the Alphacool DC-LT 2 Ceramic, also available separately. The pump runs extremely quietly and can be regulated to between 6 and 13.5V. It can also be regulated through the motherboard. If the “Eisbaer” is being run alone, the 6V setting will still have next to no performance loss, as shown in diverse test results. The insulated pump case further perfects the noise generation and ensures that vibrations are almost completely absorbed. The smooth and shiny polished copper base of the cooler ensures optimal heat absorption and can relay the heat over the fine slit structure of the cooler to the water quickly and efficiently. With the “Eisbaer”, you get an all-around perfect product that is not only extremely high-powered but also works very quietly.Notice for expansionPlease take care not to mix up the IN and OUT ports. On the “Eisbaer”, the “outlet” is marked in “red” and the “inlet” in “blue”. On the components to be connected, it is the opposite. The coupling with the “blue” marking denotes the “outlet” and the coupling with the “red” marking is the “inlet”. This is important as in many coolers the flow direction is crucial for optimal cooling performance.Note on applicationPlease use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well. Compatibility:AMD: 754 / 939 / 940 / AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 / C32 / FM1 / FM2 / FM2+ / G34Intel: LGA 1150 / LGA 1151 / LGA 1156 / LGA 1200 / LGA 1700 / LGA 1851 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 755 Technical Details Pump (Alphacool DC-LT 2 2600 Ceramic)Speed2600 RPMVoltage6-13.5V DCPower consumption3,2WMaximum flow rate72 L/hMaximum head1 mhose length30 cmTechnical Details FansFansCoreBearinghydraulic BearingOperating VoltageDC 12VPower connector4-Pin PWMRated Speed0 - 2500 rpm ±10%Max. Air Flow72.63 CFMMax. Static Pressure2.42 mm/H2O

Build your own AIO water cooling system. Alongside the different prefilled Eisbaer Aurora CPU AIO watercoolers that can be used "Out of the Box", the core of the Eisbaer Aurora is also available as a solo version. With it you can decide how you want to build your water cooling loop and which parts you want to use for it. By using the industry standard G1/4" ports, all fittings from the water cooling sector can be used. This gives you the ability to choose the hose thickness, colour, style, and liquid freely. The Eisbaer Aurora gives you full control.Pump and coolerThe basis of the pump is the Alphacool DC-LT 2 Ceramic pump which is also available separately. The pump is powerful enough to operate a circuit consisting of a radiator, a CPU block, and a graphics card water cooler. It is incredibly quiet, almost inaudible. The cold plate is made of nickel-plated copper and offers excellent heat transfer. Due to the fine fin structure of the cooler bottom and the optimized water flow, the cooling performance is comparable to the best DIY water coolers on the market. No compromises have been made in terms of performance in favour of other features.Design and lightingThe Eisbaer Aurora Solo is equipped with addressable digital RGB LEDs. The aRGB LEDs can be connected to any 3-pin 5V connector and controlled easily. The housing is decorated with a polar bear, through which the LEDs shine. Due to the extensive control possibilities of Digital RGB LEDs numerous effects can be displayed. Compatibility:AMD: AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 / FM1 / FM2 / FM2+ / sTRX4 / TR4Intel: LGA 1150 / LGA 1151 / LGA 1155 / LGA 1156 / LGA 1200 / LGA 1700 / LGA 1851 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 755 Technical data pump housingL x W x H66 x 66 x 69 mmMaterial reservoirTransparent NylonThreads2x G1/4”Connection Digital aRGB3-Pin JST + 3-Pin 5VQuantity Digital aRGB LED10Technical data pumpSpeed2600 RPMVoltage6-13,5V DCPower consumption3,2WMaximum flow rate72 L/hMaximum head1 mOther technical dataNet weight223 gMax working temperature60 °CPressure tested0,8 Bar

The Alphacool Eisbaer Aurora AIO CPU water cooler is a latest development of the popular and well-known Eisbaer cooler. Alphacool has improved many features but the ability to expand the cooler via the quick release fasteners and the famous high-quality copper radiators have been retained. The large capacity reservoir and the ability to refill the cooler has also been kept the same.The Heart of the AiOThe pump, CPU cooler and reservoir combo is the heart of the Eisbaer Aurora. The cooler base is made of high-quality copper and has a fine slotted structure. The surface area has been further expanded compared to the previous model to completely cover the larger DIE areas of AMD and Intel processors. The DC-LT pump has also been redesigned and is now almost 10% more powerful at a reduced noise level. The reservoir is many times larger compared to standard AIO systems ensuring a longer service life. In addition, the unit also has a fill port which can be used to refill if necessary. This is especially important if you want to extend the loop via the quick release fasteners.Custom Cooling Components!A great advantage of the Eisbaer Aurora series is the expandability via the aptly named ‘Eisbaer-Ready’ quick release fasteners. These have also been redesigned and are now smoother and more unobtrusive than those of the previous model. Nevertheless, these quick-release fasteners are 100% compatible with all Eisbaer Ready products such as prefilled radiators, the Eiswolf AIO water cooler for graphics cards and the well-known Alphacool HF quick-release fasteners, which are available separately for normal DIY water cooling systems. The fittings are from the Enterprise Solution series from Alphacool. They have a standard G1/4" thread and can be exchanged for any other fittings if you wish. The TPV hose is extremely resistant and is also used in the Enterprise Solution series for servers and workstations. Using custom cooling parts for an AiO means you get many more options than usual.Copper RadiatorAs usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water-carrying components such as the end chambers, the cooling fins and the cooling channels to which the fins are soldered. Only the thread inserts are made of brass as copper is too soft for this application. The cooling fins are also only lightly painted. If you look closely, the copper even shimmers through. The reason for this is to ensure that the paint does not affect the cooling capacity, which would be reduced by too thick a coating. The fin density is at an optimal 15FPI, allowing the radiator to work perfectly at low airflow. A too high density would require faster, louder fans. Alphacool has chosen the golden number here as you can keep fans running slower and quieter whilst still getting fantastic performance.Fans and LightingThe entire Eisbaer Aurora cooler has been equipped with addressable digital RGB LEDs. The pump housing has an Eisbaer pattern all around which is fully illuminated. This gives a unique look when installed into a case. The Alphacool Aurora LUX Pro fans are also fully illuminated with 5V aRGB LEDs. The fan frame has a unique pattern with many small cut-outs that create a particularly elegant effect. You do not see individual LEDs and the lighting is much more interesting than a simple LED ring. Of course, all Digital RGB LEDs can be controlled as you like, such as via the motherboard or with a third-party controller. Depending on the controller almost all effects are possible.How to Connect EverythingThe fans are controlled via a 4-pin PWM connector. To reduce the number of headers needed on the motherboard, Y-cable is included so that 2 or 3 fans can be ran from a single header. The RGB lighting is connected via a 3-pin JST connector. Each cable also has an integrated Y-adapter, so that the fans can be daisy chained very easily. A 3-pin 5V adapter is included in the package. This allows you to connect and control the fans to any mainboard with the appropriate connector. Alternatively, the included Digital RGB Controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard.The Eisbaer Aurora CPU AIO water cooling is a worthy successor of the well-known Eisbaer series and improves many details of the water cooling. Compatibility:AMD: AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 / FM1 / FM2 / FM2+ / sTRX4 / TR4Intel: LGA 1150 / LGA 1151 / LGA 1155 / LGA 1156 / LGA 1200 / LGA 1700 / LGA 1851 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 755 Technical data radiatorL x W x H279 x 124 x 30 mm (+/- 3% in the range of the pre-chambers)Material cooling finscopperMaterial chamberscopperMaterial cooling channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads2x G1/4”For fan size120 mmFan mounting options2 x one-sided / 4 x both-sidedMax working temperature60 °CPressure tested0,8 BarTechnical data cooler and pumpL x W x H66 x 66 x 69mmMaterial cooler bottomNickel plated copperMaterial cooler topPMMAThreads2x G1/4”Pump typDC-LT 2Pump speed2600 RPM (+/-10%)Head of dlivery1 mMaximum flow rate72 L/hVoltage6-13.5V DCQuantity Digital aRGB LED10Power consumption3,2WMTBF50.000hTechnical data tubeLength40 cmMaterial tubeTPV (EPDM/PP)Colorblack mattTube size12,7 / 7,6 mmHardness grade35 Shore-A to 50 Shore-DWorking temperature-50 to +155 °CTechnical data fittingsL x D straight fitting24 x 18 mmQuantity straight fittings4xFor tube size12,7 / 7,6 mmMaterial fittingsnylonTechnical data quick fastenersL x D95 x 27 mmMaterialnylonFor tube size12,7 / 7,6 mmColorblackTechnical data fansSpeed800 - 2000 RPMStatic pressure2,0 mm H2OAir flow rate104,49 m³/hBearingshydraulicFan connector4-Pin PWMConnection Digital aRGB3-Pin JST + 3-Pin 5VDimensions120 x 120 x 25 mmMax working temperature60 °CNumber of aRGB Digital LED16