Arvutitark OÜ

Compressor cooling system from Alphacool, 1000 watts cooling capacity, display, integrated pump

Compressor cooling system from Alphacool, 1000 watts of cooling power, display, integrated pump

Adapter für Wasserkühlungen, G1/4 Zoll AG auf G1/4 Zoll IG, 20 mm

Adapter für Wasserkühlungen, G1/4 Zoll AG auf G1/4 Zoll IG, 20 mm

Adapter für Wasserkühlungen, G1/4 Zoll AG auf G1/4 Zoll IG, 31,5 mm

Adapter für Wasserkühlungen, G1/4 Zoll AG auf G1/4 Zoll IG, 31,5 mm

Kompakte Distro-Plate, für kleine Builds oder Server, kombinierbar, 4x G1/4-Zoll-Anschlüsse, aus schwarzem Acetal, variabel einsetzbar

Kompakte Distro-Plate, für kleine Builds oder Server, kombinierbar, 10x G1/4-Zoll-Anschlüsse, aus schwarzem Acetal und vernickeltem Kupfer, variabel einsetzbar

Kompakte Distro-Plate, für kleine Builds oder Server, kombinierbar, 14x G1/4-Zoll-Anschlüsse, aus schwarzem Acetal und vernickeltem Kupfer, variabel einsetzbar

Kompakte Distro-Plate, für kompakte Builds oder Server, kombinierbar, 22x G1/4-Zoll-Anschlüsse, aus schwarzem Acetal und vernickeltem Kupfer, variabel einsetzbar

Adapter for water cooling, G1/4 inch male to G1/4 inch male

Behalte Temperatur und Durchfluss im Blick, Anschluss mit 2x G1/4”-Gewinde, 2-Pin-Temperaturkabel, 3-Pin-Hallsensorkabel für Durchflussdaten

I/O-Panel für Server-Racks von Aerocool, 2x USB-A 3.0, 80 cm Kabellänge

The Alphacool ES G1/4 90° rotatable Fitting with Barbed Fitting for Tubes ID 6mm is part of Alphacool’s professional ES series and sets new standards in design, functionality, and reliability for water cooling systems in servers, workstations, and industrial applications. With its precisely machined barbed fitting and solid brass construction, this connector ensures a secure and leak-proof connection for 6mm tubing. The internal diameter is optimized for minimal flow resistance, supporting effective coolant circulation even in complex system configurations. Hose barb fittings offer a compact and straightforward alternative to compression fittings, highlighting more of the tubing and saving space — especially useful in tight installations or specialized setups. Despite their minimal form factor, they provide secure hose grip and high flow capacity. Thanks to the 90° rotatable design, tubing can be routed with exceptional flexibility. The fitting simplifies clean loop layout, reduces mechanical stress on the tubing, and enables space-saving installations — ideal for compact cases or densely packed rack systems. ES Series – developed for professionals Each component in Alphacool’s ES line is engineered for professional-grade reliability and performance. Whether in a high-performance workstation or industrial cooling setup, these fittings deliver consistent performance and robust build quality. Technical data Type: 90° rotatable fitting for low flow rates Dimensions: 30.50 mm x 26.35 mm x 15.80 mm Nominal diameter: 6.5 mm Connection type: barbed fitting for tube Material: brass (CuZn39Pb3) Seal material: EPDM Shore A 70 Clamping spring material: stainless steel (X10CrNi18-8) Working pressure: 2bar Burst pressure: 8bar Working temperature: -20℃ ~ +100℃ Recommended liquids: water, deionized water, glycol water, propanediol water etc. Thread type: G1/4” 6 mm outer thread Threaded fastening: Open-end wrench width across flats 16 mm Weight: 21g Color: brass, raw

The Alphacool ES G1/4 90° rotatable Fitting with Barbed Fitting for TPV Tubes 12.7/7.6mm is part of Alphacool’s professional ES series and sets new standards in design, functionality, and reliability for water cooling systems in servers, workstations, and industrial applications. With its precisely machined barbed fitting and solid brass construction, this connector ensures a secure and leak-proof connection for 12.7/7.6mm tubing. The internal diameter is optimized for minimal flow resistance, supporting effective coolant circulation even in complex system configurations. Hose barb fittings offer a compact and straightforward alternative to compression fittings, highlighting more of the tubing and saving space — especially useful in tight installations or specialized setups. Despite their minimal form factor, they provide secure hose grip and high flow capacity. Thanks to the 90° rotatable design, tubing can be routed with exceptional flexibility. The fitting simplifies clean loop layout, reduces mechanical stress on the tubing, and enables space-saving installations — ideal for compact cases or densely packed rack systems. ES Series – developed for professionals Each component in Alphacool’s ES line is engineered for professional-grade reliability and performance. Whether in a high-performance workstation or industrial cooling setup, these fittings deliver consistent performance and robust build quality. Technical data Type: 90° rotatable fitting for low flow rates Dimensions: 26.35 mm x 29.15 mm x 15.80 mm Nominal diameter: 10.20 mm Connection type: barbed fitting for tube Material: Brass (CuZn39Pb3) Seal material: EPDM Shore A 70 Clamping spring material: stainless steel (X10CrNi18-8) Working pressure: 2bar Burst pressure: 8bar Working temperature: -20℃ ~ +100℃ Recommended liquids: water, deionized water, glycol water, propanediol water etc. Thread type: G1/4” 6 mm outer thread Threaded fastening: Open-end wrench width across flats 16 mm Weight: 23g Color: brass, raw

The Alphacool ES G1/4 barbed fitting for 12.7/7.6mm is part of Alphacool’s professional ES series and sets new standards in design, functionality, and reliability for water cooling systems in servers, workstations, and industrial applications. With its precisely machined barbed fitting and solid brass construction, this connector ensures a secure and leak-proof connection for 12.7/7.6mm tubing. The internal diameter is optimized for minimal flow resistance, supporting effective coolant circulation even in complex system configurations. Hose barb fittings offer a compact and straightforward alternative to compression fittings, highlighting more of the tubing and saving space — especially useful in tight installations or specialized setups. Despite their minimal form factor, they provide secure hose grip and high flow capacity. ES Series – developed for professionals Each component in Alphacool’s ES line is engineered for professional-grade reliability and performance. Whether in a high-performance workstation or industrial cooling setup, these fittings deliver consistent performance and robust build quality. Technical dataType:fitting for low flow ratesDimensions:31,30 mm x 17,50 mmNominal diameter:10,20 mmConnection type:barbed fitting for tubeMaterial:brass (CuZn39Pb3)Seal material:EPDM Shore A 70Working pressure:2barBurst pressure:8barWorking temperature (in degrees Celcius):-20 ~ +100Recommended liquids:water, deionized water, glycol water, propanediol water etc.Thread type:G1/4” 6 mm outer threadThreaded fastening:Open-end wrench width across flats 13 mmWeight:12gColor:brass, raw

The Alphacool ES 1-Slot Copper/Carbon water cooler with backplate was specially developed for the Alphacool Enterprise Series. Due to the positioning of the connections, the tubing of the cooler in the server rack is made much easier. The cooler top and the backplate are made of carbon. This makes the water cooler lighter compared to Alphacool's ice blocks with acetal or acrylic top. This cooler is 1U compatible! More performance! Alphacool succeeds in positioning the cooler as close as possible to the components to be cooled. To do this, the thermal pads used are reduced to a thickness of 1mm. The maximum possible reduction in the thickness of the copper block and the optimization of the water flow within the cooler allow all important components such as the GPU, voltage converter and VRAMs to be cooled much better and more effectively by the water. All of this ensures a significant increase in cooling performance. Chrome-plated copper The cooler is made entirely of chrome-plated copper. Chrome plating is much harder than nickel plating and is therefore less susceptible to acids, scratches and damage. The risk of nickel plating chipping off is completely eliminated. In addition, chrome plating looks much more homogeneous and offers a shine that cannot be achieved with nickel plating. Connections on the back? In order to save space in terms of width and height during installation, the inlet and outlet were moved to the rear of the cooling block. This positioning of the connections makes the tubing much easier and enables the GPU cooler to be easily integrated into the water circuit, even in the tightest server cases. Copper or aluminum? Alphacool uses only copper for all water-carrying parts. Copper has almost twice the thermal conductivity of aluminum and is therefore the much better choice of material for water cooling. The chrome-plated copper base is highly acid-resistant, which means that the chrome plating cannot chip off. Thermal paste & thermal pads The electrically non-conductive thermal paste is particularly well suited for high contact pressures, but can still be processed perfectly due to the viscosity of 850,000 TF. For the thermal pads, Alphacool uses soft pads that fit perfectly to the components to be cooled and are very durable. Compatibility: - Inno3D GeForce RTX 4090 iCHILL Black, 24GB GDDR6X (C4090-246XX-18330005) - Inno3D GeForce RTX 4090 iCHILL OC, 24GB GDDR6X (C4090-246XX-1833FB) - Inno3D GeForce RTX 4090 OC, 24GB GDDR6X (C40903-246XX-1833VA47) - Inno3D GeForce RTX 4090 X3 OC, 24GB GDDR6X (N40903-246XX-18332989) - KFA² GeForce RTX 4090 SG (1-Click OC), 24GB GDDR6X (49NXM5MD6DSK) Technical data cooler Dimensions (L x W x H) 234.21x119.69x19.29mm Height of the backplate 1 mm Weight (total) 1120g Radiator base material chrome-plated copper Material radiator top Carbon connections 2xG1/4" Maximum operating temperature 60°C Pressure tested 8 bars Color Black/Carbon Warranty: 3 years ? Warranty conditions

Kühler für RTX 4090 Grafikkarten im Referenzdesign, vernickelter Kupferkühlerboden + Carbondeckel, kompakte Bauweise

Schließe vier Lüfter am Hub an, Anschluss an Netzteil, PWM-Signal vom Mainboard, Warnsignale über Lautsprecher möglich, erhöhte Funktionalität mit CAN-Anschlüssen

The Alphacool ES 1-Slot GPU water cooler for the Nvidia H200 141GB is specifically designed for professional use in performance-optimized server environments. With its compact 1-slot design and strategically positioned connectors, it meets the highest standards in cooling performance, reliability, and ease of installation – particularly in dense rack setups where space is at a premium. Both the top and bottom of the cooler are made from lightweight yet durable carbon. This significantly reduces the overall weight compared to conventional solutions, while the matte carbon finish adds a subtle and refined aesthetic – functional and elegant at the same time. The cooling block itself is made entirely of chrome-plated copper. This plating is significantly harder and more resilient than traditional nickel coatings, offering long-term protection against corrosion, scratches, and mechanical stress – ideal for continuous 24/7 operation. The cooler’s inlet and outlet ports are placed at the rear of the block to save space. This connector layout simplifies tubing and integration into existing cooling loops, even within the tightest server chassis. The optimized internal channel structure ensures highly efficient heat dissipation from GPU, VRAM, and power delivery components. A precise flow path within the cooler ensures consistent water distribution across all critical areas. The solid copper base guarantees maximum thermal absorption and transfer. The robust chrome plating prevents flaking or damage, even under sustained thermal loads. The Alphacool ES 1-Slot GPU water cooler for Nvidia H200 141GB is the ideal solution for enterprise applications where performance, reliability, and efficient space utilization are key. Compatibility: - Nvidia H200 NVL, 141GB HBM3 (900-21010-0040-000) Technical dataDimensions (L x W x H)268.59 x 94.45 x 20.67 mmSlot size1Material coolerChrome-plated copperMaterial cooler topCarbonThreads2 x G1/4"Pressure tested8 BarMaximum working temperature60 °CColorblack, carbonTechnical data backplateDimensions (L x W x H)268.59 x 94.45 x 1.10 mmMaterialAluminumColorblackWarranty: 3 years???? Warranty Terms

Leistungsstarker CPU-Wasserkühler, für den Server-Bereich, aus vernickeltem Kupfer, mit Deckel in Carbon-Optik, für Intel LGA 4677

The Alphacool ES Solution Laing DDC310 pump serves as the foundation for various 1 to 4U server solutions from Alphacool. The unit is based around the very popular Alphacool DDC pump and has been coupled with a simple pump base to maintain compatibility with various Enterprise Solution reservoirs. Compact and powerful. The flat design of the Laing DDC310 pump saves space and fits with the corresponding Enterprise reservoirs from chassis as small as a 1U server rack. This results in a very powerful pump that can be used in the smallest of spaces. The DDC310 variant offers with a delivery height of 2.44m enough power to operate an extensive water loop. The performance is enough to operate a dual or quad socket system including reservoir and radiators. The performance of the pump is also sufficient to operate a render server with up to 4 graphics cards. Spherical Ceramic Bearing The pump uses a shaftless ball motor or spherical bearing. The motor is driven by magnets while the rotor is mounted on a ball-ceramic bearing. This makes the pump maintenance-free, as the bearing is self-adjusting and maintenance-free. The pump is lubricated by the coolant during operation. This makes the Alphacool ES Solution Laing DDC310 pump a so-called wet rotor pump. Due to its design, even small particles of dirt are no problem for the pump. Installation and Commissioning The pump is delivered with a classic plastic bottom which ensures a high compatibility to all Enterprise Solution products. However, the pump can also be mounted on all existing DDC pump tops from Alphacool. The pump comes with a corresponding O-ring, only the mounting screws must be used from the respective reservoir, as these may differ in length. The power is supplied via a 4-pin Molex connector, the speed can be read out via a 3-pin Molex connector. This is usually done via the 3-pin fan connector on the mainboard or via an appropriate fan controller. Technical data Dimensions (L x W x H) 62 x 62 x 30mm Material Stainless steel, Carbon (FH821Z2), Ceramic (Al2O3 99,5%), Luranyl KR 2403 GW T4 (PPE+PS) , Fortron 1140L4 (PPS) Weight 170g Speed 3250 rpm Max power consumption 8W Voltage 12V DC Power connector 4-Pin Molex PWM control n/a Tacho-Signal yes (3-Pin Molex) Max. working temperature ambiente 10°C - 50°C Max. working temperature water 10°C - 60°C Max. head of pump 2,28m Max. flow 200 l/h Color black Revision DDC4.CF-XTXXWX-01 BP54

Kühlflüssigkeit für Wasserkühlungen, extrem kältefest bis zu -40 °C, 1000 ml Fertigmischung

Kühlflüssigkeit für Wasserkühlungen, extrem kältefest bis zu -40 °C, 5000 ml Fertigmischung

Reinstwasser für Wasserkühlungen, frei von organischen und anorganischen Stoffen, demineralisiert und deionisiert, verhindert das Bilden von Rückständen

120 mm fan for servers, workstations, and radiators, max. 4,000 RPM, 4-pin PWM connector, durable dual ball bearing

40-mm-Lüfter für Server / Workstations / Radiatoren, max. 10.000 U/min, 4-Pin-PWM-Anschluss, langlebiges Doppel-Kugellager

80-mm-Lüfter für Server / Workstations / Radiatoren, max. 6.000 U/min, 4-Pin-PWM-Anschluss, langlebiges Doppel-Kugellager

Nickel-plated Pushin fitting from Alphacool, female counterpart, with bulkhead fitting

Nickel-plated push-in fitting from Alphacool, female counterpart, internal thread

Nickel-plated push-in fitting from Alphacool, internal thread, male counterpart, with bulkhead fitting.

Nickel-plated push-in fitting from Alphacool, male counterpart, G thread

Nickel-plated Pushin fitting from Alphacool, IG, male counterpart

The Alphacool ES quick-release connector is optimized for use in server and gaming systems. It is characterized by its precise manufacturing quality, excellent water flow, and a secure click mechanism for locking. Maximum flow in your system Other quick-release connectors can negatively affect water flow. Therefore, the quick coupling has been fundamentally revised to ensure water flow is barely disturbed, with a particular emphasis on minimal manufacturing tolerances. Quick and easy to connect Alphacool's ES quick-release connectors simplify the setup of server and workstation systems. Thanks to the comfortable operation, complex systems can be quickly and easily connected. To open the quick-release, the outer ring is pulled back. The seal closes immediately, preventing the coolant from leaking. To lock the quick-release connectors, it is enough to push them together. A click sound confirms the secure locking. Important: A quick-release connector always consists of two connections. Therefore, you always need the matching counterpart to get a complete quick-release. With this product, you only get half of the quick-release. Important: Note: To avoid damaging the O-ring, the quick-release should not be opened or closed in a dry state. Technical Details Color: Black, Silver Weight: 90 g Material: Nickel-plated brass, plastic Connections: G1/4 inch (AG)

Ausgleichsbehälter für Wasserkühlungen, mit Vorrichtung für DDC-Pumpen, für 1HE Server-Racks geeignet

Ausgleichsbehälter für Wasserkühlungen, mit Vorrichtung für DCC-Pumpen, für 2HE Server-Racks geeignet

The Alphacool ES RTX 4000 Ada Ge. GPU cooler was developed for the Enterprise Series, but not only impresses with its improved cooling performance and compact design, but also with its matt carbon look.Connections at the rear?By using a thin and extremely stable carbon plate, it was possible to design this as a single-slot cooler without having to compromise on the copper base. In combination with the connections positioned at the rear, several coolers can be stacked on top of each other with ease. This well thought-out design saves space, simplifies tubing and enables seamless integration into the water loop.More performance!Alphacool has given special attention to increasing cooling performance. In addition to optimising the water flow within the cooler and the thickness of the copper block, 1mm high-performance heat conducting pads are used. These measures ensure that the components to be cooled are closer to the cooler, which leads to significantly more effective cooling of all important components.Copper or aluminium?High-quality copper is used for all water-bearing parts, which offers almost twice the thermal conductivity of aluminium. The copper is also chrome-plated instead of nickel-plated, which provides additional protection for the cooler. The chrome plating is more resistant to acids, scratches and other damages, which effectively prevents coatings from flaking off.Thermal paste & thermal padsThe scope of delivery includes Apex thermal compound, which is the most durable thermal compound Alphacool offers with its low silicone content. This electrically non-conductive paste is ideal for high contact pressures and is easy to work with thanks to its viscosity. Soft, high-performance thermal pads are also supplied, which adapt perfectly to the components to be cooled. Compatibility:- Nvidia RTX 4000 Ada Generation, 20GB GDDR6, 4x DP, bulk (900-5G190-2270-000) Technical dataDimensions (L x W x H)241,25 x 96,70 x 17,50mmHeight of the backplate1mmWeight (total)1100gCooler base materialChome-plated copperCooler top materialCarbonThreads2 x G1/4"Maximum working temperature60 °CPressure tested8 BarColorBlackWarranty: 3 years???? Warranty Terms

Alphacool is expanding its Enterprise series with the latest 1-slot water coolers for the current Nvidia GeForce RTX generation. These solutions are specifically designed for use in server cases and workstations and enable efficient cooling, even in densely populated systems. By using a thin and extremely stable carbon plate, this cooler could be designed as a single-slot cooler without compromising on the copper block. Combined with the rear-mounted brass connectors, multiple coolers can be easily stacked on top of each other or side by side in the server case. This sophisticated design saves space, simplifies piping, and enables seamless integration into the water loop. High-quality copper is used for all water-carrying parts, which offers almost twice the thermal conductivity of aluminum. Furthermore, the copper is chrome-plated instead of nickel-plated, providing additional protection for the cooler. Chrome plating is more resistant to acids, scratches, and other damage, effectively preventing coatings from chipping. Technically, the GPU water cooler has been completely redesigned. To optimize cooling performance, the gaps between the cooler and the PCB components were redefined and tested. The water flow was simulated using state-of-the-art software and verified in practical tests. These extensive tests enabled improvements to the cooler base and nozzle to ensure the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - MSI GeForce RTX™ 5070 Ti 16G INSPIRE 3X OC - MSI GeForce RTX™ 5070 Ti 16G SHADOW 3X OC - MSI GeForce RTX™ 5070 Ti 16G VENTUS 3X OC (V531-092R) - Inno3D GeForce RTX™ 5080 iChill Frostbite (C50803-16D7X-1760FB) - Inno3D GeForce RTX™ 5080 iChill X3 (C50803-16D7X-176069H) - Inno3D GeForce RTX™ 5080 X3 (N50803-16D7-176068N) - Inno3D GeForce RTX™ 5080 X3 OC (N50803-16D7X-17603930) - Inno3D GeForce RTX™ 5080 X3 OC White (N50803-16D7X-17605211) - MSI GeForce RTX™ 5080 16G SHADOW 3X OC (G5080-16S3C) - MSI GeForce RTX™ 5080 16G VENTUS 3X OC (V531-095R) - MSI GeForce RTX™ 5080 16G VENTUS 3X OC Plus (V531-001R) Technical data cooler Complete dimensions (L x W x H) 186.50 x 95.75 x 21.19 mm Radiator base material chrome-plated copper Material radiator top Acrylic Material Terminal Brass Material connection thread Brass Maximum working temperature 60°C Pressure tested 0.8 bar Connections 2 x G1/4" Thickness of radiator base 3.25 mm Thick cooling fins 0.4 mm Distance between cooling fins 0.4 mm Color transparent Technical data backplate Dimensions (L x W x H) 171.50 x 95.75 x 3 mm Thick backplate without spacers 1 mm Material aluminum Warranty: 3 years

Gesleevtes Verlängerungskabel für 3-Pin-ARGB, 60 cm Länge, mit Buchse und Stecker

White extension cable, for 4-pin PWM connectors, with sturdy sleeving, 15 cm cable length

An extension cable for 4-pin PWM fans. Available in various lengths. Sleeving provides additional protection, stability and increased lifetime. Technical detailsLength30cmConnections4-pin to 4-pinMaterialPlastic, sleevedColorblack

An extension cable for 4-pin PWM fans. Available in various lengths. Sleeving provides additional protection, stability and increased lifetime. Technical detailsLength30cmConnections4-pin to 4-pinMaterialPlastic, sleevedColorwhite

An extension cable for 4-pin PWM fans. Available in various lengths. Sleeving provides additional protection, stability and increased lifetime. Technical detailsLength60cmConnections4-pin to 4-pinMaterialPlastic, sleevedColorblack

Weißes Verlängerungskabel, für 4-Pin-PWM-Anschlüsse, mit stabilen Sleeving, 60 cm Kabellänge

I/O-Panel für Servergehäuse, mit USB 2.0, inkl. Kabelsatz

The ideal supplement for cooling of Mosfet or RAM modules on graphics cards. For sufficient cooling of these components, heatsinks such as this one are required. As a result, lower temperatures and better overclocking performance can be achieved. Being made completely from Aluminum, these heatsinks allow very efficient cooling of the cooled components. A low height of only 15mm allows installation even under large graphics card coolers. Technical specifications: Dimensions: 15x15x15mm (LxWxH) Material: Black anodized Aluminium Weight: 4g each This is a kit of 10 Alphacool GPU heatsinks 15x15mm Download 3D-file (.stp)

The ideal supplement for cooling of Mosfet or RAM modules on graphics cards. For sufficient cooling of these components, heatsinks such as this one are required. As a result, lower temperatures and better overclocking performance can be achieved. Being made completely from Aluminum, these heatsinks allow very efficient cooling of the cooled components. A low height of only 15mm allows installation even under large graphics card coolers. Technical specifications: Dimensions: 7x7x15mm (LxWxH) Material: Black anodized Aluminium Weight: 2g each This is a kit of 10 Alphacool GPU heatsinks 7x7mm Download 3D-file (.stp)

The small heat sinks are the perfect addition for cooling various electronic components such as the graphics card VRam, the voltage transformer on a motherboard, or even in a power amplifier or in RC vehicles. To ensure maximum heat capacity and cooling performance, the coolers are made of copper. Alphacool uses a special coating to prevent the infamous greenish discolouration on copper as much as possible. This increases the lifespan of the cooler and ensures steady cooling performance. The coolers can be installed onto the desired components with optional thermal paste or self-adhesive thermal pads. Technical Data Dimensions: 10 x 10mm Material: Fullcopper Scope of Delivery Alphacool GPU RAM Copper Heatsinks 10x10mm - 10pcs

The small heat sinks are the perfect addition for cooling various electronic components such as the graphics card VRam, the voltage transformer on a motherboard, or even in a power amplifier or in RC vehicles. To ensure maximum heat capacity and cooling performance, the coolers are made of copper. Alphacool uses a special coating to prevent the infamous greenish discolouration on copper as much as possible. This increases the lifespan of the cooler and ensures steady cooling performance. The coolers can be installed onto the desired components with optional thermal paste or self-adhesive thermal pads. Technical Data Dimensions: 14 x 14mm Material: Fullcopper Scope of Delivery Alphacool GPU RAM Copper Heatsinks 14x14mm - 10pcs