The LtAP mini is a small waterproof wireless access point with integrated LTE antennas (with two u.fl pigtails) and miniPCI-e slot so you can use your own LTE modem of your choice. The LtAP mini also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging. The unit has several powering options: 9-30 V PoE-in by Ethernet port DC jack and microUSB. LtAP mini has a special enclosure with with a wall mounting kit two SIM slots to alternate between cellular providers and integrated GPS support making this a perfect device for use in moving vehicles like cars buses or trains. Use the built in GPS module to track the location of your vehicle in real time we have even provided a simple tracking application example in the RouterOS documentation to help you start development of your platform. External GPS antenna is available for ordering separately (not included product code GPSANT). LtAP mini (RB912R-2nD-LTm) is shipped without LTE card installed (empty miniPCI-e slot) so you can use your own LTE card.
The mANT LTE is an omnidirectional antenna specifically designed for LTE frequencies. It is an excellent companion to our LTE devices such as the wAP LTE and LtAP series.The antenna has a 5 dBi gain improving your connection in the areas with inadequate LTE service coverage allowing you to increase your connection speed.
mANT30 is a professional class 5 GHz 30dBi dish antenna built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable. The antenna comes packaged with all necessary accessories and cables. Note: Basebox wireless device pictured for illustrative purposes. It is not included.
mANT30 is a professional class 5 GHz 30dBi dish antenna built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable. The antenna comes packaged with all necessary accessories and cables. Note: Basebox wireless device pictured for illustrative purposes. It is not included.
mANT30 is a professional class 5 GHz 30dBi dish antenna built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable. The antenna comes packaged with all necessary accessories and cables. Note: Basebox wireless device pictured for illustrative purposes. It is not included.
mANTBox 2 12s is long range 12dbi 120 degrees integrated Base Station for 2.4 GHz. The mANTBox is based on our new mANT sector antennas but also has a wireless router built right in. Powered by the RB911 device the mANTBox comes ready to use with everything included. The device uses a high speed 600 MHz CPU comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power.
The mAP lite is Mikrotik smallest wireless access point. It is barely larger than a matchbox we even had to use a special Ethernet port to match it’s slim profile. You can carry it anywhere: use as a travel router to extend that hotel internet to all your devices or as a client device to improve your laptop signal range the tiny mAP lite will be always with you. It comes with a built-in magnet so you can attach it to any ferrous surface or if those are not available a metallic plate with an adhesive back is also included. It can also serve as a simple configuration tool for your servers if there is no ethernet on your mobile device plus it neatly attaches to the rack with it’s magnet. The mAP lite is a dual chain 802.11 b/g/n device and operates in 2GHz.
The mAP is a tiny size wireless Access Point with full RouterOS capabilities. It is very portable since it accepts power from a wide variety of sources - USB Passive or Active PoE (802.3af and 802.3at) and power jack. In addition to using this device as a small and portable AP it also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device for example you can connect a SXT CPE device to it. • PoE in 10-57V • Built in 2GHz AP • microUSB for a 3G/4G modem or for power input • Station or AP mode wireless • Any type PoE input 802.3af and 802.3at • Passive PoE output (same as input voltage)
Tootekood: RBMetalG-52SHPacnGTIN: 4752224004338Groove & Metal
The Metal is a completely waterproof and rugged outdoor wireless device with a super high output power.Now with 802.11ac support a Gigabit Ethernet port and a selectable wireless band (2.4GHz or 5GHz up to 80 MHz wide channel). The new Gigabit port will help you utilize the full benefit of 802.11ac high speed wireless.The Metal 52 ac supports 2.4GHz 5GHz and all the legacy wireless modes as well (802.11 b/g/n for 2.4GHz and 802.11 ac/n/a for 5GHz).Fully sealed industrial design metal case powered by RouterBOARD and RouterOS. With 1300mW of output power - to reach the last mile in any conditions. The Metal comes with an AP software license so you can attach your favorite antenna to use it as an AP to make wireless point-to-point links or as a CPE- whatever you prefer!The Metal 52 ac includes a Dual Band 2.4/5GHz Omni directional antenna (6dBi 2.4GHz 8dBi 5GHz) so you can use the unit right out of the box or use your own antenna. Wireless specifications 5 GHz Transmit power (dBm)Receive SensitivityTransmit power (mW)6MBit/s31-93125954MBit/s27-78501MCS030-931000MCS726-74398MCS922-691582.4 GHz Transmit power (dBm)Receive SensitivityTransmit power (mW)1MBit/s31-97125911MBit/s31-9112596MBit/s31-93125954MBit/s28-77631MCS031-931259MCS727-72501
netFiber 9 is a powerful outdoor switch with SFP SFP+ and Gigabit Ethernet. It features a powerful ARM v7 CPU 256 MB of RAM 4x 10G SFP+ ports and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in so you don’t have to rely on the DC jack for powering in tight hard-to-reach spots. There is a console port followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why Mikrotik designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet.There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws so you can attach the netFiber to a pole wall or mast right away.netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports a powerful CPU and a rugged case netFiber 9 is a real bargain that will make your network management so much easier!
netPower 16PAn outdoor 18 port switch with 16 Gigabit PoE-out ports and 2 SFP+. Power all your access points anywhere!Powering a bunch of access points or IP cameras and a few uplinks on a tower has never been easier. netPower 16P has 16 Gigabit Ethernet ports with PoE-out and two SFP+ ports for 10G fiber uplinks.Its sturdy and compact outdoor enclosure allows the switch to be mounted in all kinds of environments – from damp attics and shafts to towers masts and poles with hose clamps.netPower 16P has a non-blocking throughput of 36 Gbps switching capacity of 72 Gbps and forwarding rate of 53.6 Mpps.* Power supply is NOT included with the product. You are welcome to use your preferred power option like battery pack etc. Compatible also with MikroTik power supplies 24HPOW 48POW and 48V2A96W
RayAIM-DH1 is an alignment and aiming attachment for the nRAY. Use it to attach a scope of your choice for even greater precision and easier installation of the Wireless Wire nRAY.
OmniTik 5 ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU 128MB RAM high power 1 300mW 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure two integrated 7.5dBi 5GHz omni antennas a power supply a PoE injector and a mounting kit. OmniTik 5 ac (International) supports 5150MHz-5875MHz range.
OmniTik 5 PoE ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU 128MB RAM high power 1 300mW 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure two integrated 7.5dBi 5GHz omni antennas a power supply a PoE injector and a mounting kit. It also supports passive or standard 802.3at/af PoE input/output (12v-57v). Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power 48V devices (like IP camera) if 48V input is used. OmniTik 5 PoE ac (International) supports 5150MHz-5875MHz range.
UP1302C-12UP1302C-12 is a replacement 12V 10.8A power unit for CRS326-24S+2Q+RM and CCR1036 series (only for new r2 revisions with dual power supplies) as well as new CCR2116-12G-4S+.
Outdoor AC/DC power supply units for the MikroTik netPower product line. Built for situations when your outdoor switches need that extra juice.MTP250-53V47-OD can output 53V 250W while the MTP250-26V94-OD works with a 26V 250W output. Both power supplies come in a sturdy IP67 enclosure with extra protection from dust and moisture.The voltage will depend on your setup – take a look at the “DC jack input Voltage” in the Power input specifications of the desired devices. In our example the home access points are designed for 12-30 V power supplies so we are using the MTP250-26V94-OD. If you have a setup demanding higher voltage – like a net of PTZ security cameras you could use the MTP250-53V47-OD instead. Always check the necessary voltage before powering your devices!
Features Efficiency Over 75% Over-Voltage Protective Installation Short-circuit Protective Installation Protection Type: Auto-Recover Operating Temperature 0C~+40C Specifications Output Voltage 24 V Output Rating 2A Input Voltage AC 100~240V Input Frequency 50~60Hz Operating Temperature 0C~+40C Storage Temperature -20C~+85C
MT48-480095-11DG is 48 V 0.95 A power supply. It's part of Mikrotik GPEN concept that provides all the benefits of GPON but utilizes well-proven simple and inexpensive Ethernet solutions.MT48-480095-11DG allows using long Ethernet cable runs and multiple GPER units - please refer to the table in the last page of GPEN concept brochure.
The quickMOUNT extra is a advanced wall mount adapter for large point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT extra gives possibility to turn antenna within 190°. With the quickMOUNT extra is compatible with our long range heavy antennas like 30dBi parabolic dish mANT 30 or 19dBi sector mANT 19s.
The quickMOUNT pro LHG is a advanced wall or pole mount adapter for Mikrotik LHG antennas. The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro is possible to perfectly set antenna alignment using integrated graduated scale.
The quickMOUNT pro is a advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale. You can use the quickMOUNT pro with any pole mountable device or Mikrotiks small mounting clip with weight less than 1.5 kg.
The quickMOUNT is a basic wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT gives possibility to turn antenna within 190°. With the quickMOUNT it is possible to simultaneously mount two SXTs thus creating a repeater access point or creating large sector coverage.
Recently we’ve seen a demand for additional pole-mounting options for our popular SXTsq devices. You ask – we deliver! The new QM-X adapter enables vertical and horizontal adjustment on the pole.It is lightweight easy to use extremely durable and without any small parts that might break. Pick it up today for the price of a milkshake and enjoy simple positioning of your SXTsq devices like never before!Compatible devices: SXTsq series DISC 5
A new Concentrator Gateway card for LoRa® technology in mini PCIe form – so you can create customize your own 2.4 GHz IoT projects. It enables 2.4 GHz LoRa® connectivity for any MikroTik product that has a mini PCIe slot with connected USB lines. It supports 4 different RX channels and 1 TX channel.
Kit for mounting RB5009 devices in 1U rackmounts. With this kit you can mount up to four RB5009UG+S+IN routers in a single 1U rackmount space! No more server-room-Tetris just pure productivity.
Radome Cover for Mikrotik mANT 30dBi parabolic antennas! It reduces wind load protects reflector surfaces from harsh environment protects the antenna feed from falling objects as well as positively affect the antenna sustainability and operational life. It's made of special material that has low dielectric constant. Wide range of temperature and direct sunlight won't affect it.
RouterBoard 1100AHx4 Dude editionThe RouterBoard 1100AHx4 is a 13-port Gigabit router with its own rackmount case for easy integration into an existing network microSD slot for portable storage.1U Rackmount CaseUnit comes with 1U rackmount case 13x Gigabit Ethernet ports RS232 serial port and dual redundant power supplies (with -48v DC telecom power and 802.3at/af support). The RB1100AHx4 Dude edition features several high speed storage connectors (two SATA and two M.2) for using a Dude database proxy cache or any other storage intensive feature. It includes a 60GB M.2 drive already installed.Fast Internet SpeedNew RB1100AHx4 Dude Edition has Annapurna Alpine AL21400 CPU with four Cortex A15 cores clocked at 1.4GHz each for a maximum throughput of up to 7.5Gbps. The device supports IPsec hardware acceleration and is faster at it than any previous RouterBOARD device (up to 2.2Gbps with AES128).PortsThe RouterBoard 1100AHx4 doesn’t have a miniPCI slot but a single microSD slot for the memory card which is now often used in plenty of portable devices such as mobile phones and certain cameras. This makes the transfer and sharing of files more efficient and quick. It is also compatible to some devices that work with power over Ethernet provided that their much-needed power is around 12 to 24 volts which is the same one used for the device itself.The device is an amazing 13-port router that provides gigabit Ethernet with bypass capabilities making this one of the best rack-mounted routers in the market. Some of the ports are part of the switch groups. For added protection you can also encrypt the hardware.
RouterBoard 1100AHx4The RouterBoard 1100AHx4 is a 13-port Gigabit router with its own rackmount case for easy integration into an existing network.1U Rackmount CaseUnit comes with 1U rackmount case The RB1100AHx4 feature two IEC failover power connectors support 802.3at PoE input and also have a DC telecom power connector for -48 V DC powering.Fast Internet SpeedNew RB1100AHx4 has Annapurna Alpine AL21400 CPU with four Cortex A15 cores clocked at 1.4GHz each for a maximum throughput of up to 7.5Gbps.The device supports IPsec hardware acceleration and is faster at it than any previous RouterBOARD device (up to 2.2Gbps with AES128).
RouterBoard 260GS If you’re only running a small home office you’re still going to deal with plenty of devices that have to communicate to one another. When you need to make sure that everything communicates well and you want to have a more centralized system for it you can purchase RouterBoard 260Gs one of the reputable switches in the market today. It is cost effective flexible easy to use and completely reliable. It’s a great choice for any small business owners. Carries the Benefits of Switches Switches are a great addition to any network for a variety of reasons. The RouterBoard 260GS now allows you to manage a lot of devices at one time. Moreover you can drastically improve the way they relate to one another by ensuring traffic is very clean with hardly any noise or interference that may cause one or both of them to malfunction. You can also easily keep track of how the components of your network are being used. Easy Configuration The RouterBoard 260GS is a small compact and handy device that measures 113 mm in length 89 mm in width and 28 mm in height. It’s very portable so you can move it anywhere you prefer. Also it doesn’t tend to occupy a lot of space. There are LEDs in a panel that quickly notify you of the general condition of the devices within the switch. There’s also an SFP port when you need to work with fiber channels. It is compatible to various SFP modules. Great Performance The RouterBoard 260GS comes with 5 Gigabit ports as well as a 96K SRAM and AR8327 Atheros core processor. It also operates with its proprietary switch operating system that allows you to manage the switch obtain more information about the switch restore and reset the configuration create backup and upgrade the firmware.
The RB260GSP is a small SOHO switch which features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. The RB260GSP has five Gigabit Ethernet ports and one SFP cage switching is done by an Atheros Switch Chip. The device is running an operating system designed specifically for MikroTik Switch products - SwOS.
The RB4011 wall mount kit is made for protecting your device and it’s ethernet ports from unauthorised access. Made from durable steel the mount attaches to a wall and allows the ethernet cables to be plugged in before the router is mounted inside. This means that once the device is secured there is no easy way to unplug cables or move the device.
Mikrotiks RB4011 uses the amazingly powerful quad core Corte A15 chip from Annapurna labs an Amazon Company same as in Mikrotiks carrier grade RB1100AHx4 unit. The CPU supports IPSec hardware acceleration there is 1GB RAM so this device will easily handle any task you have configured RouterOS to perform. All of this power in a compact and professional looking solid metal enclosure in matte black.The Wifi model is a dual band four chain unit with a supported data rate of up to 1733Mbps in 5GHz. For legacy devices the unit also has a dual chain 2 GHz interface. The device has large external antennas for amazing 360 degree coverage.In addition to the ten 1Gbps ethernet ports an SFP+ Port provides optional 10Gbps connectivity through an SFP+ module (not included).
