Features: Support Wifi convenient setting up and no wiring required Support web configuration Aluminum alloy Nice industry design IP65 IK08 3 indicator integrated; Internal Mifare card reader 2-ch Indoor station access control; Noise suppression and echo cancellation 2MP HD Camera with IR supplement Standard PoE/ 12 VDC
Power seadme tüüp: Power over Ethernet Power Device Location100-240 V Input sagedus: 50/60 Hz Rated Input Current1.3 A Input Power Ühendusi Quantity: 1Input Power Ühendusi Type: IEC-320 C6 väljund pinge1väljundusvõimsus Ühendusi Type: RJ-45 Package Type1mm Nominal kaal: 0.192 kg Warranty Products Returnable: Jah garantii Term (month)12 month(s) Warranty Validation Criteria: Serial Number Pack kaal Brutto (kg)1Box kaal Brutto (kg): 17.5 kg Packs in Box: 501
The MikroTik 100 Gigabit product line keeps growing: QSFP28 module for distances up to 100m MikroTik 100 Gigabit product line keeps growing: QSFP28 module for distances up to 100m Add this QSFP module for distances up to 100 meters to your CCR2216, CRS504 or CRS518 setups and enjoy real speed and ultimate reliability. This optical module offers four independent full-duplex channels with up to 25 Gbps per channel bandwidth and an aggregate bandwidth of 100 Gbps. The module has built-in digital diagnostic functions such as optical power monitoring.
Ubiquiti's UniFi Fibre Patch Cable is a Multi-Mode, LC-LC, OM3 fibre patch cable designed to be used with SFP modules such as Ubiquiti's UFiber modules. Specifications Type: OM3 (Duplex)Mode: Multi-0ModeColour: TurquoiseConnectors: LC-LCCore diameter: 50 micronsCladding diameter: 125 micronsOutside Diameter: 2 mm (each fiber)Length: 3m
Performance Breakthrough airMAX® ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. Innovative Mechanical DesignThe integrated isolator design improves RF isolation to spatially filter out interference, and the metal-plated interior of the rear housing enhances RF shielding.Superior RF IsolationCompare the two near-field plots, and note the superior performance of the integrated RF isolator. Both near-field plots are displayed in watts and use a linear scale.Superior ProcessingUbiquiti's airMAX® engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.Advanced Software TechnologyUbiquiti’s airMAX® technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.
We are now offering a Hot Swap -48V DC telecom power supply (product code PW48V-12V150W), available to purchase separately for use with CCR1072. Simply remove one of the current power supplies and replace with the new PW48V-12V150W for -48V installations - simple and easy. You don't even need to turn off the device.
RayAIM-DH1 is an alignment and aiming attachment for the nRAY. Use it to attach a scope of your choice for even greater precision and easier installation of the Wireless Wire nRAY.
TSW040 on Teltonika 8-portiline haldamata PoE+ kommutaator, millel on kaheksa RJ45 porti, mille koguvõimsus on 240 W või kuni 30 W ühe pordi kohta. Sellel kompaktsel ja vastupidaval 8-portilisel kommutaatoril on ka 2-poolne toitesisend ja integreeritud DIN-kandur lihtsaks paigaldamiseks, mis muudab selle ideaalseks tööstuslikeks rakendusteks. TSW040-l on lai pingevahemik 7-57 VDC ja PoE-väljalülituse pingevahemik 44-57 VDC. 8 X POE-OUT RJ45Kaheksa PoE-out Ethernet-porti, mille koguvõimsuse eelarve on 240 W2-POOLNE TOITESISENDLihtne ja sobib tööstuslikeks rakendusteksINTEGREERITUD DIN-KÕVAKETTAGALihtne paigaldus plug-and-play kasutuselevõtuksLAI PINGEVAHEMIK7-57 VDC või 44-57 VDC PoE-väljalülitamiseks
Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
RUTM08 on tööstuslik juhtmega ruuter, mis on mõeldud usaldusväärsete kaabliühenduste loomiseks paljudes tööstuslikes rakendustes. Marsruuteril on neli Gigabit RJ45 porti, mis võimaldavad kiiret võrgu- ja andmeedastust ühendatud lõpp-punktide vahel. RUTM08 toetab kuni 128 tag/port-põhist VLANi, mis suurendavad võrgu paindlikkust, ning mitut VPN-i ja M2M-sideprotokolli, mis on eriti olulised tööstuskeskkondades.INTERFACES4 x Gigabit RJ45 porti, mis toetavad kuni 128 tag/port-põhist VLANi.VPNToetatud on arvukad VPN-protokollid, sealhulgas Tailscale, OpenVPN, IPsec, ZeroTier jt.M2M PROTOKOLLIDToetatud on mitu tööstusprotokolli, sealhulgas MQTT, Modbus, DNP3, DLMS.RMSKaugjuhtimiseks, juurdepääsuks ja VPN-teenusteksSTANDARDPAKETT*Marsruuter RUTM0818 W TOITEALLIKASEthernet-kaabel (1,5 m)QSG (kiirkäsiraamat)Pakendikarp
A super low loss RPSMA cable for superior connection quality, suited for indoor and outdoor use, this cable provides superior matching and loss values.The name of this cable comes from combining the words “flexible” and “waveguide”, to denote the high end features of this product.The inner conductor is silver plated copper, and both connectors are soldered, not crimped, for the best possible signal quality. Ideally suited for our BaseBox and other products with RPSMA connectors, and works with most antennas.
Original part number POE-24-24W-G Product name Ubiquiti PoE-24G Passive PoE Adapter EU, 24V 1A, ESD prot, 24W, Gigagbit Eth. Producer Ubiquiti Networks Class of product
Fiber + Power Solution for Outdoor PoE DevicesOvercome PoE limitations with the next-generation FiberPoE™, model F-POE-G2. The FiberPoE Gen 2 is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection. Fiber-to-Ethernet ConversionThe FiberPoE provides fiber connectivity to any PoE device.Designed for Outdoor DurabilityThe FiberPoE features an outdoor weatherproof form factor with integrated strain relief management.Power VersatilityThe FiberPoE allows separate power from standard Ethernet cables or standard terminal block / power cable support. There are three ways to configure the input and output power:
HGO-antenna-OUTDual-band screw-on outdoor antennaDual-band 2.4GHz / 5 GHz screw-on outdoor antenna with RP-SMA female connectors. Provides 3.3 dBi gain for the 2.4 GHz band and 5.5-7.1 dBi gain for the 5 GHz band. Just add two of HGO-antenna-OUT to NetMetal ac² to have powerful Dual-Band Outdoor AP!
60 GHz solutions offer fiber-like speed and stability - while saving you plenty of time and money on installation and maintenance. The latest Cube 60Pro series is taking the advantages of 60 GHz networking to the next level – with the 802.11ay standard for even higher distances stability speed and convenience.
Quick-MountToolless Quick-Mounts for Ubiquiti CPE Products.Designed for additional mounting flexibility and device alignment options, the Quick-Mount accessory kit features an easy-to-use, toolless design.Features: No tools required Quick and easy installation Supports NanoStation, NanoStation Loco, and NanoBeam devices Flexible, easy alignment
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28
An extra cost-effective upgrade of our previous R11 LTE6 modem. It offers the same speed (up to 300 Mbps) and features as the earlier version, but the price is even lower! This mini-PCIe modem is designed for the EMEA/APAC/Australia regions, and the supported frequencies include the popular B28 band. Carrier aggregation allows the R11 to use multiple bands simultaneously. That is a huge advantage in areas with many LTE users. It provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside. Depending on the service provider, we have seen Internet speed doubling in rural areas after switching to carrier aggregation!
Specifications Output Voltage 54V Output Rating 1.5A Input Voltage AC 100~240V Input Frequency 50~60Hz Operating Temperature 0C~+40C Storage Temperature -20C~+85C
The Lite AP GPS features an integrated high-performance 90 degree sector antenna and GPS Sync for scale-able, cost-effective airMAX AC networks.Introducing the Ubiquiti LiteAP AC airMAX (LAP-GPS), the latest high-performance access point from Ubiquiti Networks. Featuring an ultra-lightweight form factor, the LAP-GPS was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Each of these access points operates in the worldwide, licence-free 5 GHz frequency range with high-performance speeds. The LAP-GPS combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range, with cost-effective value.Key FeaturesPart of the Ubiquiti LiteAP AC rangeIncludes Pole Mounting KitRevolutionary Operating SystemAccess Point PtMP airMAX Mixed ModeairMAX AC Protocol SupportLong-Range Point-to-Point (PtP) Link ModeSelectable Channel WidthPtP: 10/20/30/40/50/60/80 MHzPtMP: 10/20/30/40 MHzAutomatic Channel SelectionTransmit Power Control: Automatic/ManualAutomatic Distance Selection (ACK Timing)Strongest WPA2 SecurityairMagic Channel Selection ToolDynamic Configuration ChangesInstant Input ValidationHardware OverviewThe LAP-GPS delivers up to 450+ Mbps real TCP/IP throughput and features an efficient form factor.GPS Sync SupportThe LAP-GPS supports GPS Sync for faster, more scalable, carrier-class networks. Precise GPS frame synchronisation enables co-located LAP-GPS devices to transmit and receive data without interfering with each other, allowing for better frequency reuse and increased network stability. In a cost-effective WISP deployment, the LAP-GPS is used as an Access Point in an airMAX AC Point-to-MultiPoint network.
Antenna kit for LoRa® with a 6.5 dBi Omni antenna for 824-960 MHz 1 m long SMA cable and mechanical holder for quick and easy mast attachment.The new kit offers significantly higher durability in a smaller package – without sacrificing performance. The improved cable durability and the added IP66 water resistance with protection against powerful jets make this kit an excellent choice for all kinds of marine and coastal projects.Mount this antenna on a 25-50 mm mast or on the wall and enjoy the superb coverage!
AF60 LR is a 60GHz radio designed for high-throughput connectivity over an extended range. The airFiber 60 LR features the integrated high-gain dish antenna for high speed long-range performance Point-to-Point (PtP) links. New WaveTechnology enables incredible long-range performance within the 60GHz spectrum.Includes a built-in Bluetooth management radio for easy setup. Low-Interference 60 GHz Spectrum Integrated GPS Long Range Up to 12 km Precision Alignment Mount Included link.ui.com Planning Support Quick Setup Using the *UISP™ App via Bluetooth *UNMS Controller will change to UISP™ Controller from version 1.3.0 onward.
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
Improved Noise Immunity The NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Innovative Mechanical Design • Built-in mechanical tilt The mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt. • Quick assembly The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the NanoBeam on the pole. • Easy removal The antenna feed can be detached with the push of a button. Corrosion Resistance • Fasteners GEOMET®-coated for improved corrosion resistance when compared with zinc-plated fasteners.
The mANT LTE is an omnidirectional antenna specifically designed for LTE frequencies. It is an excellent companion to our LTE devices, such as the wAP LTE and LtAP series. The antenna has a 5 dBi gain, improving your connection in the areas with inadequate LTE service coverage, allowing you to increase your connection speed. Antenna gain5Beamwidth360°Connector2 x SMA femaleDiameter x Depth129 x 129 x 34 mmFrequency Range699 - 2690 MHzOperating Temperature-40°C .. +70°C tested
The active GPS antenna is the perfect companion for the LtAP mini, giving you the possibility to get accurate geographical coordinates of your router, even when it is mounted indoors. The long cable allows to bring the antenna outside and mount it with the included magnet, or double sided tape.The ACGPSA is a standalone active GPS antenna, specifically made for the 1575.4 MHz frequency used by GPS. The size of the antenna is 46.5 mm x 26.5 mm x 12.5 mm and is waterproof with IP67 rating. It has a long 5 m cable with an SMA connector, to be connected to LtAP mini via the ACSMAUFL pigtail (available for ordering separately).Specifications: Center frequency1575.42 MhzGain26 dBWater resistance100% waterproof (IP67)ConnectorSMACable5 m RG-174/U (standard)Standard mountingMagnetic baseDC voltages3 V +-0.3 VDC current8 mA maxDimensions46.5 x 46.5 x 12.5 mmWeight35 g, 120 g (with cable and connector)Operating temperature-40°C .. +85°C tested
mANTBox 2 12s is long range 12dbi 120 degrees integrated Base Station for 2.4 GHz. The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB911 device, the mANTBox comes ready to use with everything included. The device uses a high speed 600 MHz CPU, comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power.
Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case that provides wire speed connectivity with several new switching features.It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
